#include <qgs3dmapsettings.h>

Inheritance diagram for Qgs3DMapSettings:

[legend]

Signals
void	ambientOcclusionSettingsChanged ()
	Emitted when ambient occlusion rendering settings are changed.

void	axisSettingsChanged ()
	Emitted when 3d axis rendering settings are changed.

void	backgroundColorChanged ()
	Emitted when the background color has changed.

void	cameraMovementSpeedChanged ()
	Emitted when the camera movement speed was changed.

void	cameraNavigationModeChanged ()
	Emitted when the camera navigation mode was changed.

void	debugDepthMapSettingsChanged ()
	Emitted when depth map debugging has changed.

void	debugOverlayEnabledChanged (bool debugOverlayEnabled)
	Emitted when the debug overaly is enabled or disabled.

void	debugShadowMapSettingsChanged ()
	Emitted when shadow map debugging has changed.

void	directionalLightsChanged ()
	Emitted when the list of directional lights changes.

void	extentChanged ()
	Emitted when the 3d view's 2d extent has changed.

void	eyeDomeLightingDistanceChanged ()
	Emitted when the eye dome lighting distance has changed.

void	eyeDomeLightingEnabledChanged ()
	Emitted when the flag whether eye dome lighting is used has changed.

void	eyeDomeLightingStrengthChanged ()
	Emitted when the eye dome lighting strength has changed.

void	fieldOfViewChanged ()
	Emitted when the camera lens field of view changes.

void	fpsCounterEnabledChanged (bool fpsCounterEnabled)
	Emitted when the FPS counter is enabled or disabled.

void	layersChanged ()
	Emitted when the list of map layers for 3d rendering has changed.

void	lightSourcesChanged ()
	Emitted when any of the light source settings in the map changes.

void	mapTileResolutionChanged ()
	Emitted when the map tile resoulution has changed.

void	maxTerrainGroundErrorChanged ()
	Emitted when the maximum terrain ground error has changed.

void	maxTerrainScreenErrorChanged ()
	Emitted when the maximum terrain screen error has changed.

void	pointLightsChanged ()
	Emitted when the list of point lights changes.

void	projectionTypeChanged ()
	Emitted when the camera lens projection type changes.

void	renderersChanged ()
	Emitted when the list of map's extra renderers have been modified.

void	selectionColorChanged ()
	Emitted when the selection color has changed.

void	settingsChanged ()
	Emitted when one of the configuration settings has changed.

void	shadowSettingsChanged ()
	Emitted when shadow rendering settings are changed.

void	showCameraRotationCenterChanged ()
	Emitted when the flag whether camera's rotation center is shown has changed.

void	showCameraViewCenterChanged ()
	Emitted when the flag whether camera's view center is shown has changed.

void	showExtentIn2DViewChanged ()
	Emitted when the parameter to display 3d view's extent in the 2D canvas has changed.

void	showLabelsChanged ()
	Emitted when the flag whether labels are displayed on terrain tiles has changed.

void	showLightSourceOriginsChanged ()
	Emitted when the flag whether light source origins are shown has changed.

void	showTerrainBoundingBoxesChanged ()
	Emitted when the flag whether terrain's bounding boxes are shown has changed.

void	showTerrainTilesInfoChanged ()
	Emitted when the flag whether terrain's tile info is shown has changed.

void	skyboxSettingsChanged ()
	Emitted when skybox settings are changed.

void	terrainElevationOffsetChanged (float newElevation)
	Emitted when the terrain elevation offset is changed.

void	terrainGeneratorChanged ()
	Emitted when the terrain generator has changed.

void	terrainMapThemeChanged ()
	Emitted when terrain's map theme has changed.

void	terrainShadingChanged ()
	Emitted when terrain shading enabled flag or terrain shading material has changed.

void	terrainVerticalScaleChanged ()
	Emitted when the vertical scale of the terrain has changed.

void	viewFrustumVisualizationEnabledChanged ()
	Emitted when the camera's view frustum visualization on the main 2D map canvas is enabled or disabled.

Public Member Functions
	Qgs3DMapSettings ()

	Qgs3DMapSettings (const Qgs3DMapSettings &other)

	~Qgs3DMapSettings () override

QgsAmbientOcclusionSettings	ambientOcclusionSettings () const
	Returns the current configuration of screen space ambient occlusion.

QColor	backgroundColor () const
	Returns background color of the 3D map view.

double	cameraMovementSpeed () const
	Returns the camera movement speed.

Qgis::NavigationMode	cameraNavigationMode () const
	Returns the navigation mode used by the camera.

void	configureTerrainFromProject (QgsProjectElevationProperties *properties, const QgsRectangle &fullExtent)
	Configures the map's terrain settings directly from a project's elevation properties.

QgsCoordinateReferenceSystem	crs () const
	Returns coordinate reference system used in the 3D scene.

Qt::Corner	debugDepthMapCorner () const
	Returns the corner where the shadow map preview is displayed.

bool	debugDepthMapEnabled () const
	Returns whether the shadow map debugging is enabled.

double	debugDepthMapSize () const
	Returns the size of the shadow map preview.

Qt::Corner	debugShadowMapCorner () const
	Returns the corner where the shadow map preview is displayed.

bool	debugShadowMapEnabled () const
	Returns whether the shadow map debugging is enabled.

double	debugShadowMapSize () const
	Returns the size of the shadow map preview.

QgsRectangle	extent () const
	Returns the 3D scene's 2D extent in the 3D scene's CRS.

int	eyeDomeLightingDistance () const
	Returns the eye dome lighting distance value (contributes to the contrast of the image)

bool	eyeDomeLightingEnabled () const
	Returns whether eye dome lighting is used.

double	eyeDomeLightingStrength () const
	Returns the eye dome lighting strength value.

float	fieldOfView () const
	Returns the camera lens' field of view.

Qgs3DAxisSettings	get3DAxisSettings () const
	Returns the current configuration of 3d axis.

bool	isDebugOverlayEnabled () const
	Returns whether debug overlay is enabled.

bool	isFpsCounterEnabled () const
	Returns whether FPS counter label is enabled.

bool	isSkyboxEnabled () const
	Returns whether the skybox is enabled.

bool	isTerrainShadingEnabled () const
	Returns whether terrain shading is enabled.

QList< QgsMapLayer * >	layers () const
	Returns the list of 3D map layers to be rendered in the scene.

QList< QgsLightSource * >	lightSources () const
	Returns list of directional light sources defined in the scene.

QgsMapThemeCollection *	mapThemeCollection () const
	Returns pointer to the collection of map themes.

int	mapTileResolution () const
	Returns resolution (in pixels) of the texture of a terrain tile.

QgsVector3D	mapToWorldCoordinates (const QgsVector3D &mapCoords) const
	Converts map coordinates to 3D world coordinates (applies offset and turns (x,y,z) into (x,-z,y))

float	maxTerrainGroundError () const
	Returns maximum ground error of terrain tiles in world units.

float	maxTerrainScreenError () const
	Returns maximum allowed screen error of terrain tiles in pixels.

Qgs3DMapSettings &	operator= (Qgs3DMapSettings const &)=delete

QgsVector3D	origin () const
	Returns coordinates in map CRS at which 3D scene has origin (0,0,0).

double	outputDpi () const
	Returns DPI used for conversion between real world units (e.g.

const QgsPathResolver &	pathResolver () const
	Returns the path resolver for conversion between relative and absolute paths during rendering operations, e.g.

Qt3DRender::QCameraLens::ProjectionType	projectionType () const
	Returns the camera lens' projection type.

void	readXml (const QDomElement &elem, const QgsReadWriteContext &context)
	Reads configuration from a DOM element previously written by writeXml()

Qgis::RendererUsage	rendererUsage () const
	Returns the renderer usage.

void	resolveReferences (const QgsProject &project)
	Resolves references to other objects (map layers) after the call to readXml()

QColor	selectionColor () const
	Returns color used for selected features.

void	set3DAxisSettings (const Qgs3DAxisSettings &axisSettings, bool force=false)
	Sets the current configuration of 3d axis.

void	setAmbientOcclusionSettings (const QgsAmbientOcclusionSettings &ambientOcclusionSettings)
	Sets the current configuration of screen space ambient occlusion.

void	setBackgroundColor (const QColor &color)
	Sets background color of the 3D map view.

void	setCameraMovementSpeed (double movementSpeed)
	Sets the camera movement speed.

void	setCameraNavigationMode (Qgis::NavigationMode navigationMode)
	Sets the navigation mode for the camera.

void	setCrs (const QgsCoordinateReferenceSystem &crs)
	Sets coordinate reference system used in the 3D scene.

void	setDebugDepthMapSettings (bool enabled, Qt::Corner corner, double size)
	Sets the debugging settings of the depth map.

void	setDebugShadowMapSettings (bool enabled, Qt::Corner corner, double size)
	Sets the debugging settings of the shadow map.

void	setExtent (const QgsRectangle &extent)
	Sets the 3D scene's 2D extent in the 3D scene's CRS, while also setting the scene's origin to the extent's center This needs to be called during initialization, as terrain will only be generated within this extent and layer 3D data will only be loaded within this extent too.

void	setEyeDomeLightingDistance (int distance)
	Sets the eye dome lighting distance value (contributes to the contrast of the image.

void	setEyeDomeLightingEnabled (bool enabled)
	Sets whether eye dome lighting will be used.

void	setEyeDomeLightingStrength (double strength)
	Sets the eye dome lighting strength value.

void	setFieldOfView (const float fieldOfView)
	Sets the camera lens' field of view.

void	setIsDebugOverlayEnabled (bool debugOverlayEnabled)
	Sets whether debug overlay is enabled The debug overlay displays some debugging and profiling information.

void	setIsFpsCounterEnabled (bool fpsCounterEnabled)
	Sets whether FPS counter label is enabled.

void	setIsSkyboxEnabled (bool enabled)
	Sets whether the skybox is enabled.

void	setLayers (const QList< QgsMapLayer * > &layers)
	Sets the list of 3D map layers to be rendered in the scene.

void	setLightSources (const QList< QgsLightSource * > &lights)
	Sets the list of light sources defined in the scene.

void	setMapThemeCollection (QgsMapThemeCollection *mapThemes)
	Sets pointer to the collection of map themes.

void	setMapTileResolution (int res)
	Sets resolution (in pixels) of the texture of a terrain tile.

void	setMaxTerrainGroundError (float error)
	Returns maximum ground error of terrain tiles in world units.

void	setMaxTerrainScreenError (float error)
	Sets maximum allowed screen error of terrain tiles in pixels.

void	setOrigin (const QgsVector3D &origin)
	Sets coordinates in map CRS at which our 3D world has origin (0,0,0)

void	setOutputDpi (const double dpi)
	Sets DPI used for conversion between real world units (e.g.

void	setPathResolver (const QgsPathResolver &resolver)
	Sets the path resolver for conversion between relative and absolute paths during rendering operations, e.g.

void	setProjectionType (const Qt3DRender::QCameraLens::ProjectionType projectionType)
	Sets the camera lens' projection type.

void	setRendererUsage (Qgis::RendererUsage rendererUsage)
	Sets the renderer usage.

void	setSelectionColor (const QColor &color)
	Sets color used for selected features.

void	setShadowSettings (const QgsShadowSettings &shadowSettings)
	Sets the current configuration of shadow rendering.

void	setShowCameraRotationCenter (bool enabled)
	Sets whether to show camera's rotation center as a sphere (for debugging)

void	setShowCameraViewCenter (bool enabled)
	Sets whether to show camera's view center as a sphere (for debugging)

void	setShowExtentIn2DView (bool show)
	Sets whether the extent is displayed on the main 2D map canvas.

void	setShowLabels (bool enabled)
	Sets whether to display labels on terrain tiles.

void	setShowLightSourceOrigins (bool enabled)
	Sets whether to show light source origins as a sphere (for debugging)

void	setShowTerrainBoundingBoxes (bool enabled)
	Sets whether to display bounding boxes of terrain tiles (for debugging)

void	setShowTerrainTilesInfo (bool enabled)
	Sets whether to display extra tile info on top of terrain tiles (for debugging)

void	setSkyboxSettings (const QgsSkyboxSettings &skyboxSettings)
	Sets the current configuration of the skybox.

void	setTerrainElevationOffset (float offset)
	Sets the terrain elevation offset (used to move the terrain up or down)

void	setTerrainGenerator (QgsTerrainGenerator *gen)
	Sets terrain generator and sets extent() as the generator's extent.

void	setTerrainMapTheme (const QString &theme)
	Sets name of the map theme.

void	setTerrainRenderingEnabled (bool terrainRenderingEnabled)
	Sets whether the 2D terrain surface will be rendered in.

void	setTerrainShadingEnabled (bool enabled)
	Sets whether terrain shading is enabled.

void	setTerrainShadingMaterial (const QgsPhongMaterialSettings &material)
	Sets terrain shading material.

void	setTerrainVerticalScale (double zScale)
	Sets vertical scale (exaggeration) of terrain (1 = true scale, > 1 = hills get more pronounced)

void	setTransformContext (const QgsCoordinateTransformContext &context)
	Sets the coordinate transform context, which stores various information regarding which datum transforms should be used when transforming points from a source to destination coordinate reference system.

void	setViewFrustumVisualizationEnabled (bool enabled)
	Sets whether the camera's view frustum is visualized on the 2D map canvas.

void	setViewSyncMode (Qgis::ViewSyncModeFlags mode)
	Sets the view sync mode (used to synchronize the 2D main map canvas and the 3D camera navigation)

QgsShadowSettings	shadowSettings () const
	Returns the current configuration of shadows.

bool	showCameraRotationCenter () const
	Returns whether to show camera's rotation center as a sphere (for debugging)

bool	showCameraViewCenter () const
	Returns whether to show camera's view center as a sphere (for debugging)

bool	showExtentIn2DView () const
	Returns whether the extent is displayed on the main 2D map canvas.

bool	showLabels () const
	Returns whether to display labels on terrain tiles.

bool	showLightSourceOrigins () const
	Returns whether to show light source origins as a sphere (for debugging)

bool	showTerrainBoundingBoxes () const
	Returns whether to display bounding boxes of terrain tiles (for debugging)

bool	showTerrainTilesInfo () const
	Returns whether to display extra tile info on top of terrain tiles (for debugging)

QgsSkyboxSettings	skyboxSettings () const
	Returns the current configuration of the skybox.

float	terrainElevationOffset () const
	Returns the elevation offset of the terrain (used to move the terrain up or down)

QgsTerrainGenerator *	terrainGenerator () const
	Returns the terrain generator.

QString	terrainMapTheme () const
	Returns name of the map theme (from the active project) that will be used for terrain's texture.

bool	terrainRenderingEnabled () const
	Returns whether the 2D terrain surface will be rendered.

QgsPhongMaterialSettings	terrainShadingMaterial () const
	Returns terrain shading material.

double	terrainVerticalScale () const
	Returns vertical scale (exaggeration) of terrain.

QgsCoordinateTransformContext	transformContext () const
	Returns the coordinate transform context, which stores various information regarding which datum transforms should be used when transforming points from a source to destination coordinate reference system.

bool	viewFrustumVisualizationEnabled () const
	Returns whether the camera's view frustum is visualized on the 2D map canvas.

Qgis::ViewSyncModeFlags	viewSyncMode () const
	Returns the view sync mode (used to synchronize the 2D main map canvas and the 3D camera navigation)

QgsVector3D	worldToMapCoordinates (const QgsVector3D &worldCoords) const
	Converts 3D world coordinates to map coordinates (applies offset and turns (x,y,z) into (x,-z,y))

QDomElement	writeXml (QDomDocument &doc, const QgsReadWriteContext &context) const
	Writes configuration to a DOM element, to be used later with readXml()

Public Member Functions inherited from QgsTemporalRangeObject
	QgsTemporalRangeObject (bool enabled=false)
	Constructor QgsTemporalRangeObject.

virtual	~QgsTemporalRangeObject ()=default

bool	isTemporal () const
	Returns `true` if the object's temporal range is enabled, and the object will be filtered when rendering maps with a specific time range set.

void	setIsTemporal (bool enabled)
	Sets whether the temporal range is enabled (i.e.

void	setTemporalRange (const QgsDateTimeRange &range)
	Sets the temporal range for the object.

const QgsDateTimeRange &	temporalRange () const
	Returns the datetime range for the object.

Detailed Description

3

Definition of the world.

Warning: Qgs3DMapSettings are a QObject subclass, and accordingly are not safe for access across different threads. See Qgs3DRenderContext instead for a safe snapshot of settings from Qgs3DMapSettings.

Definition at line 54 of file qgs3dmapsettings.h.

Constructor & Destructor Documentation

◆ Qgs3DMapSettings() [1/2]

Qgs3DMapSettings::Qgs3DMapSettings ( )

Definition at line 40 of file qgs3dmapsettings.cpp.

◆ Qgs3DMapSettings() [2/2]

Qgs3DMapSettings::Qgs3DMapSettings ( const Qgs3DMapSettings & other )

Definition at line 50 of file qgs3dmapsettings.cpp.

◆ ~Qgs3DMapSettings()

Qgs3DMapSettings::~Qgs3DMapSettings ( )

override

Definition at line 117 of file qgs3dmapsettings.cpp.

Member Function Documentation

◆ ambientOcclusionSettings()

QgsAmbientOcclusionSettings Qgs3DMapSettings::ambientOcclusionSettings ( ) const

Returns the current configuration of screen space ambient occlusion.

Since: QGIS 3.28

Definition at line 1179 of file qgs3dmapsettings.cpp.

◆ ambientOcclusionSettingsChanged

void Qgs3DMapSettings::ambientOcclusionSettingsChanged ( )

signal

Emitted when ambient occlusion rendering settings are changed.

Since: QGIS 3.28

◆ axisSettingsChanged

void Qgs3DMapSettings::axisSettingsChanged ( )

signal

Emitted when 3d axis rendering settings are changed.

Since: QGIS 3.26

◆ backgroundColor()

QColor Qgs3DMapSettings::backgroundColor ( ) const

Returns background color of the 3D map view.

Definition at line 600 of file qgs3dmapsettings.cpp.

◆ backgroundColorChanged

void Qgs3DMapSettings::backgroundColorChanged ( )

signal

Emitted when the background color has changed.

◆ cameraMovementSpeed()

double Qgs3DMapSettings::cameraMovementSpeed ( ) const

Returns the camera movement speed.

Since: QGIS 3.18

Definition at line 1133 of file qgs3dmapsettings.cpp.

◆ cameraMovementSpeedChanged

void Qgs3DMapSettings::cameraMovementSpeedChanged ( )

signal

Emitted when the camera movement speed was changed.

Since: QGIS 3.18

◆ cameraNavigationMode()

Qgis::NavigationMode Qgs3DMapSettings::cameraNavigationMode ( ) const

Returns the navigation mode used by the camera.

Since: QGIS 3.18

Definition at line 1115 of file qgs3dmapsettings.cpp.

◆ cameraNavigationModeChanged

void Qgs3DMapSettings::cameraNavigationModeChanged ( )

signal

Emitted when the camera navigation mode was changed.

Since: QGIS 3.18

◆ configureTerrainFromProject()

void Qgs3DMapSettings::configureTerrainFromProject	(	QgsProjectElevationProperties *	properties,
		const QgsRectangle &	fullExtent
	)

Configures the map's terrain settings directly from a project's elevation properties.

Since: QGIS 3.26

Definition at line 670 of file qgs3dmapsettings.cpp.

◆ crs()

QgsCoordinateReferenceSystem Qgs3DMapSettings::crs ( ) const

Returns coordinate reference system used in the 3D scene.

See also: setCrs()

Definition at line 540 of file qgs3dmapsettings.cpp.

◆ debugDepthMapCorner()

Qt::Corner Qgs3DMapSettings::debugDepthMapCorner ( ) const

Returns the corner where the shadow map preview is displayed.

Definition at line 1279 of file qgs3dmapsettings.cpp.

◆ debugDepthMapEnabled()

bool Qgs3DMapSettings::debugDepthMapEnabled ( ) const

Returns whether the shadow map debugging is enabled.

Definition at line 1272 of file qgs3dmapsettings.cpp.

◆ debugDepthMapSettingsChanged

void Qgs3DMapSettings::debugDepthMapSettingsChanged ( )

signal

Emitted when depth map debugging has changed.

Since: QGIS 3.18

◆ debugDepthMapSize()

double Qgs3DMapSettings::debugDepthMapSize ( ) const

Returns the size of the shadow map preview.

Definition at line 1286 of file qgs3dmapsettings.cpp.

◆ debugOverlayEnabledChanged

void Qgs3DMapSettings::debugOverlayEnabledChanged ( bool debugOverlayEnabled )

signal

Emitted when the debug overaly is enabled or disabled.

Since: QGIS 3.26

◆ debugShadowMapCorner()

Qt::Corner Qgs3DMapSettings::debugShadowMapCorner ( ) const

Returns the corner where the shadow map preview is displayed.

Definition at line 1248 of file qgs3dmapsettings.cpp.

◆ debugShadowMapEnabled()

bool Qgs3DMapSettings::debugShadowMapEnabled ( ) const

Returns whether the shadow map debugging is enabled.

Definition at line 1241 of file qgs3dmapsettings.cpp.

◆ debugShadowMapSettingsChanged

void Qgs3DMapSettings::debugShadowMapSettingsChanged ( )

signal

Emitted when shadow map debugging has changed.

Since: QGIS 3.18

◆ debugShadowMapSize()

double Qgs3DMapSettings::debugShadowMapSize ( ) const

Returns the size of the shadow map preview.

Definition at line 1255 of file qgs3dmapsettings.cpp.

◆ directionalLightsChanged

void Qgs3DMapSettings::directionalLightsChanged ( )

signal

Emitted when the list of directional lights changes.

Since: QGIS 3.16

◆ extent()

QgsRectangle Qgs3DMapSettings::extent ( ) const

Returns the 3D scene's 2D extent in the 3D scene's CRS.

See also: crs()

Since: QGIS 3.30

Definition at line 480 of file qgs3dmapsettings.cpp.

◆ extentChanged

void Qgs3DMapSettings::extentChanged ( )

signal

Emitted when the 3d view's 2d extent has changed.

See also: setExtent()

Since: QGIS 3.30

◆ eyeDomeLightingDistance()

int Qgs3DMapSettings::eyeDomeLightingDistance ( ) const

Returns the eye dome lighting distance value (contributes to the contrast of the image)

Definition at line 1023 of file qgs3dmapsettings.cpp.

◆ eyeDomeLightingDistanceChanged

void Qgs3DMapSettings::eyeDomeLightingDistanceChanged ( )

signal

Emitted when the eye dome lighting distance has changed.

Since: QGIS 3.18

◆ eyeDomeLightingEnabled()

bool Qgs3DMapSettings::eyeDomeLightingEnabled ( ) const

Returns whether eye dome lighting is used.

Definition at line 989 of file qgs3dmapsettings.cpp.

◆ eyeDomeLightingEnabledChanged

void Qgs3DMapSettings::eyeDomeLightingEnabledChanged ( )

signal

Emitted when the flag whether eye dome lighting is used has changed.

Since: QGIS 3.18

◆ eyeDomeLightingStrength()

double Qgs3DMapSettings::eyeDomeLightingStrength ( ) const

Returns the eye dome lighting strength value.

Definition at line 1006 of file qgs3dmapsettings.cpp.

◆ eyeDomeLightingStrengthChanged

void Qgs3DMapSettings::eyeDomeLightingStrengthChanged ( )

signal

Emitted when the eye dome lighting strength has changed.

Since: QGIS 3.18

◆ fieldOfView()

float Qgs3DMapSettings::fieldOfView ( ) const

Returns the camera lens' field of view.

Since: QGIS 3.8

Definition at line 1079 of file qgs3dmapsettings.cpp.

◆ fieldOfViewChanged

void Qgs3DMapSettings::fieldOfViewChanged ( )

signal

Emitted when the camera lens field of view changes.

Since: QGIS 3.8

◆ fpsCounterEnabledChanged

void Qgs3DMapSettings::fpsCounterEnabledChanged ( bool fpsCounterEnabled )

signal

Emitted when the FPS counter is enabled or disabled.

Since: QGIS 3.18

◆ get3DAxisSettings()

Qgs3DAxisSettings Qgs3DMapSettings::get3DAxisSettings ( ) const

Returns the current configuration of 3d axis.

Returns: QGIS 3.26

Definition at line 1366 of file qgs3dmapsettings.cpp.

◆ isDebugOverlayEnabled()

bool Qgs3DMapSettings::isDebugOverlayEnabled ( ) const

Returns whether debug overlay is enabled.

See also: setIsDebugOverlayEnabled()

Since: QGIS 3.26

Definition at line 1452 of file qgs3dmapsettings.cpp.

◆ isFpsCounterEnabled()

bool Qgs3DMapSettings::isFpsCounterEnabled ( ) const

Returns whether FPS counter label is enabled.

See also: setIsFpsCounterEnabled()

Since: QGIS 3.18

Definition at line 1224 of file qgs3dmapsettings.cpp.

◆ isSkyboxEnabled()

bool Qgs3DMapSettings::isSkyboxEnabled ( ) const

Returns whether the skybox is enabled.

See also: setIsSkyboxEnabled()

Since: QGIS 3.16

Definition at line 1210 of file qgs3dmapsettings.cpp.

◆ isTerrainShadingEnabled()

bool Qgs3DMapSettings::isTerrainShadingEnabled ( ) const

Returns whether terrain shading is enabled.

When enabled, in addition to the terrain texture generated from the map, the terrain rendering will take into account position of the lights, terrain normals and terrain shading material (ambient and specular colors, shininess).

Since: QGIS 3.6

Definition at line 827 of file qgs3dmapsettings.cpp.

◆ layers()

QList< QgsMapLayer * > Qgs3DMapSettings::layers ( ) const

Returns the list of 3D map layers to be rendered in the scene.

This setting dictates which layers are to be rendered using their 3D rendering configuration, if available.

See also: setLayers(); layersChanged()

Definition at line 656 of file qgs3dmapsettings.cpp.

◆ layersChanged

void Qgs3DMapSettings::layersChanged ( )

signal

Emitted when the list of map layers for 3d rendering has changed.

See also: setLayers(); layers()

◆ lightSources()

QList< QgsLightSource * > Qgs3DMapSettings::lightSources ( ) const

Returns list of directional light sources defined in the scene.

See also: setLightSources()

Since: QGIS 3.26

Definition at line 1030 of file qgs3dmapsettings.cpp.

◆ lightSourcesChanged

void Qgs3DMapSettings::lightSourcesChanged ( )

signal

Emitted when any of the light source settings in the map changes.

Since: QGIS 3.26

◆ mapThemeCollection()

QgsMapThemeCollection * Qgs3DMapSettings::mapThemeCollection ( ) const

Returns pointer to the collection of map themes.

Normally this would be QgsProject::mapThemeCollection() of the currently used project. Without a valid map theme collection object it is not possible to resolve map themes from their names.

Since: QGIS 3.6

Definition at line 575 of file qgs3dmapsettings.cpp.

◆ mapTileResolution()

int Qgs3DMapSettings::mapTileResolution ( ) const

Returns resolution (in pixels) of the texture of a terrain tile.

This parameter influences how many zoom levels for terrain tiles there will be (together with maxTerrainGroundError())

Definition at line 729 of file qgs3dmapsettings.cpp.

◆ mapTileResolutionChanged

void Qgs3DMapSettings::mapTileResolutionChanged ( )

signal

Emitted when the map tile resoulution has changed.

◆ mapToWorldCoordinates()

QgsVector3D Qgs3DMapSettings::mapToWorldCoordinates ( const QgsVector3D & mapCoords ) const

Converts map coordinates to 3D world coordinates (applies offset and turns (x,y,z) into (x,-z,y))

Definition at line 519 of file qgs3dmapsettings.cpp.

◆ maxTerrainGroundError()

float Qgs3DMapSettings::maxTerrainGroundError ( ) const

Returns maximum ground error of terrain tiles in world units.

This parameter influences how many zoom levels there will be (together with mapTileResolution()). This value tells that when the given ground error is reached (e.g. 10 meters), it makes no sense to further split terrain tiles into finer ones because they will not add extra details anymore.

Definition at line 782 of file qgs3dmapsettings.cpp.

◆ maxTerrainGroundErrorChanged

void Qgs3DMapSettings::maxTerrainGroundErrorChanged ( )

signal

Emitted when the maximum terrain ground error has changed.

◆ maxTerrainScreenError()

float Qgs3DMapSettings::maxTerrainScreenError ( ) const

Returns maximum allowed screen error of terrain tiles in pixels.

This parameter decides how aggressively less detailed terrain tiles are swapped to more detailed ones as camera gets closer. Each tile has its error defined in world units - this error gets projected to screen pixels according to camera view and if the tile's error is greater than the allowed error, it will be swapped by more detailed tiles with lower error.

Definition at line 747 of file qgs3dmapsettings.cpp.

◆ maxTerrainScreenErrorChanged

void Qgs3DMapSettings::maxTerrainScreenErrorChanged ( )

signal

Emitted when the maximum terrain screen error has changed.

◆ operator=()

Qgs3DMapSettings & Qgs3DMapSettings::operator= ( Qgs3DMapSettings const & )

delete

◆ origin()

QgsVector3D Qgs3DMapSettings::origin ( ) const

Returns coordinates in map CRS at which 3D scene has origin (0,0,0).

See also: setOrigin()

Definition at line 512 of file qgs3dmapsettings.cpp.

◆ outputDpi()

double Qgs3DMapSettings::outputDpi ( ) const

Returns DPI used for conversion between real world units (e.g.

mm) and pixels Default value is 96

Since: QGIS 3.10

Definition at line 1158 of file qgs3dmapsettings.cpp.

◆ pathResolver()

const QgsPathResolver & Qgs3DMapSettings::pathResolver ( ) const

Returns the path resolver for conversion between relative and absolute paths during rendering operations, e.g.

for resolving relative symbol paths.

See also: setPathResolver()

Definition at line 561 of file qgs3dmapsettings.cpp.

◆ pointLightsChanged

void Qgs3DMapSettings::pointLightsChanged ( )

signal

Emitted when the list of point lights changes.

Since: QGIS 3.6

◆ projectionType()

Qt3DRender::QCameraLens::ProjectionType Qgs3DMapSettings::projectionType ( ) const

Returns the camera lens' projection type.

Since: QGIS 3.18

Definition at line 1097 of file qgs3dmapsettings.cpp.

◆ projectionTypeChanged

void Qgs3DMapSettings::projectionTypeChanged ( )

signal

Emitted when the camera lens projection type changes.

Since: QGIS 3.18

◆ readXml()

void Qgs3DMapSettings::readXml	(	const QDomElement &	elem,
		const QgsReadWriteContext &	context
	)

Reads configuration from a DOM element previously written by writeXml()

Definition at line 122 of file qgs3dmapsettings.cpp.

◆ renderersChanged

void Qgs3DMapSettings::renderersChanged ( )

signal

Emitted when the list of map's extra renderers have been modified.

Since: QGIS 3.10

◆ rendererUsage()

Qgis::RendererUsage Qgs3DMapSettings::rendererUsage ( ) const

Returns the renderer usage.

See also: rendererUsage()

Since: QGIS 3.24

Definition at line 1320 of file qgs3dmapsettings.cpp.

◆ resolveReferences()

void Qgs3DMapSettings::resolveReferences ( const QgsProject & project )

Resolves references to other objects (map layers) after the call to readXml()

Definition at line 463 of file qgs3dmapsettings.cpp.

◆ selectionColor()

QColor Qgs3DMapSettings::selectionColor ( ) const

Returns color used for selected features.

Definition at line 618 of file qgs3dmapsettings.cpp.

◆ selectionColorChanged

void Qgs3DMapSettings::selectionColorChanged ( )

signal

Emitted when the selection color has changed.

◆ set3DAxisSettings()

void Qgs3DMapSettings::set3DAxisSettings	(	const Qgs3DAxisSettings &	axisSettings,
		bool	force = `false`
	)

Sets the current configuration of 3d axis.

Since: QGIS 3.26

Definition at line 1431 of file qgs3dmapsettings.cpp.

◆ setAmbientOcclusionSettings()

void Qgs3DMapSettings::setAmbientOcclusionSettings ( const QgsAmbientOcclusionSettings & ambientOcclusionSettings )

Sets the current configuration of screen space ambient occlusion.

Since: QGIS 3.28

Definition at line 1202 of file qgs3dmapsettings.cpp.

◆ setBackgroundColor()

void Qgs3DMapSettings::setBackgroundColor ( const QColor & color )

Sets background color of the 3D map view.

Definition at line 589 of file qgs3dmapsettings.cpp.

◆ setCameraMovementSpeed()

void Qgs3DMapSettings::setCameraMovementSpeed ( double movementSpeed )

Sets the camera movement speed.

Since: QGIS 3.18

Definition at line 1140 of file qgs3dmapsettings.cpp.

◆ setCameraNavigationMode()

void Qgs3DMapSettings::setCameraNavigationMode ( Qgis::NavigationMode navigationMode )

Sets the navigation mode for the camera.

Since: QGIS 3.18

Definition at line 1122 of file qgs3dmapsettings.cpp.

◆ setCrs()

void Qgs3DMapSettings::setCrs ( const QgsCoordinateReferenceSystem & crs )

Sets coordinate reference system used in the 3D scene.

See also: crs()

Definition at line 533 of file qgs3dmapsettings.cpp.

◆ setDebugDepthMapSettings()

void Qgs3DMapSettings::setDebugDepthMapSettings	(	bool	enabled,
		Qt::Corner	corner,
		double	size
	)

Sets the debugging settings of the depth map.

See also: debugDepthMapEnabled(); debugDepthMapCorner(); debugDepthMapSize()

Since: QGIS 3.18

Definition at line 1262 of file qgs3dmapsettings.cpp.

◆ setDebugShadowMapSettings()

void Qgs3DMapSettings::setDebugShadowMapSettings	(	bool	enabled,
		Qt::Corner	corner,
		double	size
	)

Sets the debugging settings of the shadow map.

See also: debugShadowMapEnabled(); debugShadowMapCorner(); debugShadowMapSize()

Since: QGIS 3.18

Definition at line 1231 of file qgs3dmapsettings.cpp.

◆ setExtent()

void Qgs3DMapSettings::setExtent ( const QgsRectangle & extent )

Sets the 3D scene's 2D extent in the 3D scene's CRS, while also setting the scene's origin to the extent's center This needs to be called during initialization, as terrain will only be generated within this extent and layer 3D data will only be loaded within this extent too.

See also: setOrigin(); setCrs()

Since: QGIS 3.30

Definition at line 487 of file qgs3dmapsettings.cpp.

◆ setEyeDomeLightingDistance()

void Qgs3DMapSettings::setEyeDomeLightingDistance ( int distance )

Sets the eye dome lighting distance value (contributes to the contrast of the image.

See also: eyeDomeLightingDistance()

Since: QGIS 3.18

Definition at line 1013 of file qgs3dmapsettings.cpp.

◆ setEyeDomeLightingEnabled()

void Qgs3DMapSettings::setEyeDomeLightingEnabled ( bool enabled )

Sets whether eye dome lighting will be used.

See also: eyeDomeLightingEnabled()

Since: QGIS 3.18

Definition at line 979 of file qgs3dmapsettings.cpp.

◆ setEyeDomeLightingStrength()

void Qgs3DMapSettings::setEyeDomeLightingStrength ( double strength )

Sets the eye dome lighting strength value.

See also: eyeDomeLightingStrength()

Since: QGIS 3.18

Definition at line 996 of file qgs3dmapsettings.cpp.

◆ setFieldOfView()

void Qgs3DMapSettings::setFieldOfView ( const float fieldOfView )

Sets the camera lens' field of view.

Since: QGIS 3.8

Definition at line 1086 of file qgs3dmapsettings.cpp.

◆ setIsDebugOverlayEnabled()

void Qgs3DMapSettings::setIsDebugOverlayEnabled ( bool debugOverlayEnabled )

Sets whether debug overlay is enabled The debug overlay displays some debugging and profiling information.

It has been introduced in Qt version 5.15. This parameter is transient. It is not saved in the project parameters.

See also: isDebugOverlayEnabled()

Since: QGIS 3.26

Definition at line 1373 of file qgs3dmapsettings.cpp.

◆ setIsFpsCounterEnabled()

void Qgs3DMapSettings::setIsFpsCounterEnabled ( bool fpsCounterEnabled )

Sets whether FPS counter label is enabled.

See also: isFpsCounterEnabled()

Since: QGIS 3.18

Definition at line 1293 of file qgs3dmapsettings.cpp.

◆ setIsSkyboxEnabled()

void Qgs3DMapSettings::setIsSkyboxEnabled ( bool enabled )

Sets whether the skybox is enabled.

See also: isSkyboxEnabled()

Since: QGIS 3.16

Definition at line 1217 of file qgs3dmapsettings.cpp.

◆ setLayers()

void Qgs3DMapSettings::setLayers ( const QList< QgsMapLayer * > & layers )

Sets the list of 3D map layers to be rendered in the scene.

This setting dictates which layers are to be rendered using their 3D rendering configuration, if available.

See also: layers(); layersChanged()

Definition at line 643 of file qgs3dmapsettings.cpp.

◆ setLightSources()

void Qgs3DMapSettings::setLightSources ( const QList< QgsLightSource * > & lights )

Sets the list of light sources defined in the scene.

Ownership of the lights is transferred to the settings.

See also: lightSources()

Since: QGIS 3.26

Definition at line 1037 of file qgs3dmapsettings.cpp.

◆ setMapThemeCollection()

void Qgs3DMapSettings::setMapThemeCollection ( QgsMapThemeCollection * mapThemes )

Sets pointer to the collection of map themes.

See also: mapThemeCollection()

Since: QGIS 3.6

Definition at line 582 of file qgs3dmapsettings.cpp.

◆ setMapTileResolution()

void Qgs3DMapSettings::setMapTileResolution ( int res )

Sets resolution (in pixels) of the texture of a terrain tile.

See also: mapTileResolution()

Definition at line 718 of file qgs3dmapsettings.cpp.

◆ setMaxTerrainGroundError()

void Qgs3DMapSettings::setMaxTerrainGroundError ( float error )

Returns maximum ground error of terrain tiles in world units.

See also: maxTerrainGroundError()

Definition at line 754 of file qgs3dmapsettings.cpp.

◆ setMaxTerrainScreenError()

void Qgs3DMapSettings::setMaxTerrainScreenError ( float error )

Sets maximum allowed screen error of terrain tiles in pixels.

See also: maxTerrainScreenError()

Definition at line 736 of file qgs3dmapsettings.cpp.

◆ setOrigin()

void Qgs3DMapSettings::setOrigin ( const QgsVector3D & origin )

Sets coordinates in map CRS at which our 3D world has origin (0,0,0)

We move the 3D world origin to the center of the extent of our terrain: this is done to minimize the impact of numerical errors when operating with 32-bit floats. Unfortunately this is not enough when working with a large area (still results in jitter with scenes spanning hundreds of kilometers and zooming in a lot).

Need to look into more advanced techniques like "relative to center" or "relative to eye" to improve the precision.

See also: origin()

Definition at line 505 of file qgs3dmapsettings.cpp.

◆ setOutputDpi()

void Qgs3DMapSettings::setOutputDpi ( const double dpi )

Sets DPI used for conversion between real world units (e.g.

mm) and pixels

Parameters

dpi	the number of dot per inch

Since: QGIS 3.10

Definition at line 1151 of file qgs3dmapsettings.cpp.

◆ setPathResolver()

void Qgs3DMapSettings::setPathResolver ( const QgsPathResolver & resolver )

Sets the path resolver for conversion between relative and absolute paths during rendering operations, e.g.

for resolving relative symbol paths.

See also: pathResolver()

Definition at line 568 of file qgs3dmapsettings.cpp.

◆ setProjectionType()

void Qgs3DMapSettings::setProjectionType ( const Qt3DRender::QCameraLens::ProjectionType projectionType )

Sets the camera lens' projection type.

Since: QGIS 3.18

Definition at line 1104 of file qgs3dmapsettings.cpp.

◆ setRendererUsage()

void Qgs3DMapSettings::setRendererUsage ( Qgis::RendererUsage rendererUsage )

Sets the renderer usage.

See also: rendererUsage()

Since: QGIS 3.24

Definition at line 1327 of file qgs3dmapsettings.cpp.

◆ setSelectionColor()

void Qgs3DMapSettings::setSelectionColor ( const QColor & color )

Sets color used for selected features.

Definition at line 607 of file qgs3dmapsettings.cpp.

◆ setShadowSettings()

void Qgs3DMapSettings::setShadowSettings ( const QgsShadowSettings & shadowSettings )

Sets the current configuration of shadow rendering.

Since: QGIS 3.16

Definition at line 1194 of file qgs3dmapsettings.cpp.

◆ setShowCameraRotationCenter()

void Qgs3DMapSettings::setShowCameraRotationCenter ( bool enabled )

Sets whether to show camera's rotation center as a sphere (for debugging)

Since: QGIS 3.24

Definition at line 925 of file qgs3dmapsettings.cpp.

◆ setShowCameraViewCenter()

void Qgs3DMapSettings::setShowCameraViewCenter ( bool enabled )

Sets whether to show camera's view center as a sphere (for debugging)

Since: QGIS 3.4

Definition at line 907 of file qgs3dmapsettings.cpp.

◆ setShowExtentIn2DView()

void Qgs3DMapSettings::setShowExtentIn2DView ( bool show )

Sets whether the extent is displayed on the main 2D map canvas.

Since: QGIS 3.32

Definition at line 1459 of file qgs3dmapsettings.cpp.

◆ setShowLabels()

void Qgs3DMapSettings::setShowLabels ( bool enabled )

Sets whether to display labels on terrain tiles.

Definition at line 961 of file qgs3dmapsettings.cpp.

◆ setShowLightSourceOrigins()

void Qgs3DMapSettings::setShowLightSourceOrigins ( bool enabled )

Sets whether to show light source origins as a sphere (for debugging)

Since: QGIS 3.16

Definition at line 943 of file qgs3dmapsettings.cpp.

◆ setShowTerrainBoundingBoxes()

void Qgs3DMapSettings::setShowTerrainBoundingBoxes ( bool enabled )

Sets whether to display bounding boxes of terrain tiles (for debugging)

Definition at line 870 of file qgs3dmapsettings.cpp.

◆ setShowTerrainTilesInfo()

void Qgs3DMapSettings::setShowTerrainTilesInfo ( bool enabled )

Sets whether to display extra tile info on top of terrain tiles (for debugging)

Definition at line 889 of file qgs3dmapsettings.cpp.

◆ setSkyboxSettings()

void Qgs3DMapSettings::setSkyboxSettings ( const QgsSkyboxSettings & skyboxSettings )

Sets the current configuration of the skybox.

Since: QGIS 3.16

Definition at line 1186 of file qgs3dmapsettings.cpp.

◆ setTerrainElevationOffset()

void Qgs3DMapSettings::setTerrainElevationOffset ( float offset )

Sets the terrain elevation offset (used to move the terrain up or down)

See also: terrainElevationOffset()

Since: QGIS 3.18

Definition at line 765 of file qgs3dmapsettings.cpp.

◆ setTerrainGenerator()

void Qgs3DMapSettings::setTerrainGenerator ( QgsTerrainGenerator * gen )

Sets terrain generator and sets extent() as the generator's extent.

It takes care of producing terrain tiles from the input data. Takes ownership of the generator.

Note: Terrain generation will only occur if terrainRenderingEnabled() is true.

See also: terrainGenerator(); setTerrainRenderingEnabled(); setExtent()

Definition at line 789 of file qgs3dmapsettings.cpp.

◆ setTerrainMapTheme()

void Qgs3DMapSettings::setTerrainMapTheme ( const QString & theme )

Sets name of the map theme.

See also: terrainMapTheme()

Since: QGIS 3.6

Definition at line 852 of file qgs3dmapsettings.cpp.

◆ setTerrainRenderingEnabled()

void Qgs3DMapSettings::setTerrainRenderingEnabled ( bool terrainRenderingEnabled )

Sets whether the 2D terrain surface will be rendered in.

See also: terrainRenderingEnabled()

Since: QGIS 3.22

Definition at line 1310 of file qgs3dmapsettings.cpp.

◆ setTerrainShadingEnabled()

void Qgs3DMapSettings::setTerrainShadingEnabled ( bool enabled )

Sets whether terrain shading is enabled.

See also: isTerrainShadingEnabled()

Since: QGIS 3.6

Definition at line 816 of file qgs3dmapsettings.cpp.

◆ setTerrainShadingMaterial()

void Qgs3DMapSettings::setTerrainShadingMaterial ( const QgsPhongMaterialSettings & material )

Sets terrain shading material.

See also: terrainShadingMaterial()

Since: QGIS 3.6

Definition at line 834 of file qgs3dmapsettings.cpp.

◆ setTerrainVerticalScale()

void Qgs3DMapSettings::setTerrainVerticalScale ( double zScale )

Sets vertical scale (exaggeration) of terrain (1 = true scale, > 1 = hills get more pronounced)

Definition at line 625 of file qgs3dmapsettings.cpp.

◆ settingsChanged

void Qgs3DMapSettings::settingsChanged ( )

signal

Emitted when one of the configuration settings has changed.

Since: QGIS 3.24

◆ setTransformContext()

void Qgs3DMapSettings::setTransformContext ( const QgsCoordinateTransformContext & context )

Sets the coordinate transform context, which stores various information regarding which datum transforms should be used when transforming points from a source to destination coordinate reference system.

See also: transformContext()

Definition at line 554 of file qgs3dmapsettings.cpp.

◆ setViewFrustumVisualizationEnabled()

void Qgs3DMapSettings::setViewFrustumVisualizationEnabled ( bool enabled )

Sets whether the camera's view frustum is visualized on the 2D map canvas.

Since: QGIS 3.26

Definition at line 1355 of file qgs3dmapsettings.cpp.

◆ setViewSyncMode()

void Qgs3DMapSettings::setViewSyncMode ( Qgis::ViewSyncModeFlags mode )

Sets the view sync mode (used to synchronize the 2D main map canvas and the 3D camera navigation)

Since: QGIS 3.26

Definition at line 1341 of file qgs3dmapsettings.cpp.

◆ shadowSettings()

QgsShadowSettings Qgs3DMapSettings::shadowSettings ( ) const

Returns the current configuration of shadows.

Returns: QGIS 3.16

Definition at line 1172 of file qgs3dmapsettings.cpp.

◆ shadowSettingsChanged

void Qgs3DMapSettings::shadowSettingsChanged ( )

signal

Emitted when shadow rendering settings are changed.

Since: QGIS 3.16

◆ showCameraRotationCenter()

bool Qgs3DMapSettings::showCameraRotationCenter ( ) const

Returns whether to show camera's rotation center as a sphere (for debugging)

Since: QGIS 3.24

Definition at line 936 of file qgs3dmapsettings.cpp.

◆ showCameraRotationCenterChanged

void Qgs3DMapSettings::showCameraRotationCenterChanged ( )

signal

Emitted when the flag whether camera's rotation center is shown has changed.

Since: QGIS 3.24

◆ showCameraViewCenter()

bool Qgs3DMapSettings::showCameraViewCenter ( ) const

Returns whether to show camera's view center as a sphere (for debugging)

Since: QGIS 3.4

Definition at line 918 of file qgs3dmapsettings.cpp.

◆ showCameraViewCenterChanged

void Qgs3DMapSettings::showCameraViewCenterChanged ( )

signal

Emitted when the flag whether camera's view center is shown has changed.

Since: QGIS 3.4

◆ showExtentIn2DView()

bool Qgs3DMapSettings::showExtentIn2DView ( ) const

Returns whether the extent is displayed on the main 2D map canvas.

See also: setShowExtentIn2DView()

Since: QGIS 3.32

Definition at line 1384 of file qgs3dmapsettings.cpp.

◆ showExtentIn2DViewChanged

void Qgs3DMapSettings::showExtentIn2DViewChanged ( )

signal

Emitted when the parameter to display 3d view's extent in the 2D canvas has changed.

See also: setShowExtentIn2DView()

Since: QGIS 3.32

◆ showLabels()

bool Qgs3DMapSettings::showLabels ( ) const

Returns whether to display labels on terrain tiles.

Definition at line 972 of file qgs3dmapsettings.cpp.

◆ showLabelsChanged

void Qgs3DMapSettings::showLabelsChanged ( )

signal

Emitted when the flag whether labels are displayed on terrain tiles has changed.

◆ showLightSourceOrigins()

bool Qgs3DMapSettings::showLightSourceOrigins ( ) const

Returns whether to show light source origins as a sphere (for debugging)

Since: QGIS 3.16

Definition at line 954 of file qgs3dmapsettings.cpp.

◆ showLightSourceOriginsChanged

void Qgs3DMapSettings::showLightSourceOriginsChanged ( )

signal

Emitted when the flag whether light source origins are shown has changed.

Since: QGIS 3.15

◆ showTerrainBoundingBoxes()

bool Qgs3DMapSettings::showTerrainBoundingBoxes ( ) const

Returns whether to display bounding boxes of terrain tiles (for debugging)

Definition at line 881 of file qgs3dmapsettings.cpp.

◆ showTerrainBoundingBoxesChanged

void Qgs3DMapSettings::showTerrainBoundingBoxesChanged ( )

signal

Emitted when the flag whether terrain's bounding boxes are shown has changed.

◆ showTerrainTilesInfo()

bool Qgs3DMapSettings::showTerrainTilesInfo ( ) const

Returns whether to display extra tile info on top of terrain tiles (for debugging)

Definition at line 900 of file qgs3dmapsettings.cpp.

◆ showTerrainTilesInfoChanged

void Qgs3DMapSettings::showTerrainTilesInfoChanged ( )

signal

Emitted when the flag whether terrain's tile info is shown has changed.

◆ skyboxSettings()

QgsSkyboxSettings Qgs3DMapSettings::skyboxSettings ( ) const

Returns the current configuration of the skybox.

Since: QGIS 3.16

Definition at line 1165 of file qgs3dmapsettings.cpp.

◆ skyboxSettingsChanged

void Qgs3DMapSettings::skyboxSettingsChanged ( )

signal

Emitted when skybox settings are changed.

Since: QGIS 3.16

◆ terrainElevationOffset()

float Qgs3DMapSettings::terrainElevationOffset ( ) const

Returns the elevation offset of the terrain (used to move the terrain up or down)

Definition at line 775 of file qgs3dmapsettings.cpp.

◆ terrainElevationOffsetChanged

void Qgs3DMapSettings::terrainElevationOffsetChanged ( float newElevation )

signal

Emitted when the terrain elevation offset is changed.

Since: QGIS 3.16

◆ terrainGenerator()

QgsTerrainGenerator * Qgs3DMapSettings::terrainGenerator ( ) const

Returns the terrain generator.

It takes care of producing terrain tiles from the input data.

Note: Terrain generation will only occur if terrainRenderingEnabled() is true.

See also: setTerrainGenerator(); terrainRenderingEnabled()

Definition at line 809 of file qgs3dmapsettings.cpp.

◆ terrainGeneratorChanged

void Qgs3DMapSettings::terrainGeneratorChanged ( )

signal

Emitted when the terrain generator has changed.

◆ terrainMapTheme()

QString Qgs3DMapSettings::terrainMapTheme ( ) const

Returns name of the map theme (from the active project) that will be used for terrain's texture.

Empty map theme name means that the map theme is not overridden and the current map theme will be used.

Note: Support for map themes only works if mapThemeCollection() is a valid object (otherwise it is not possible to resolve map themes from names)

Since: QGIS 3.6

Definition at line 863 of file qgs3dmapsettings.cpp.

◆ terrainMapThemeChanged

void Qgs3DMapSettings::terrainMapThemeChanged ( )

signal

Emitted when terrain's map theme has changed.

Since: QGIS 3.6

◆ terrainRenderingEnabled()

bool Qgs3DMapSettings::terrainRenderingEnabled ( ) const

Returns whether the 2D terrain surface will be rendered.

See also: setTerrainRenderingEnabled()

Since: QGIS 3.22

Definition at line 1303 of file qgs3dmapsettings.cpp.

◆ terrainShadingChanged

void Qgs3DMapSettings::terrainShadingChanged ( )

signal

Emitted when terrain shading enabled flag or terrain shading material has changed.

Since: QGIS 3.6

◆ terrainShadingMaterial()

QgsPhongMaterialSettings Qgs3DMapSettings::terrainShadingMaterial ( ) const

Returns terrain shading material.

Diffuse color component is ignored since the diffuse component is provided by 2D rendered map texture. Only used when isTerrainShadingEnabled() is true.

Since: QGIS 3.6

Definition at line 845 of file qgs3dmapsettings.cpp.

◆ terrainVerticalScale()

double Qgs3DMapSettings::terrainVerticalScale ( ) const

Returns vertical scale (exaggeration) of terrain.

Definition at line 636 of file qgs3dmapsettings.cpp.

◆ terrainVerticalScaleChanged

void Qgs3DMapSettings::terrainVerticalScaleChanged ( )

signal

Emitted when the vertical scale of the terrain has changed.

◆ transformContext()

QgsCoordinateTransformContext Qgs3DMapSettings::transformContext ( ) const

Returns the coordinate transform context, which stores various information regarding which datum transforms should be used when transforming points from a source to destination coordinate reference system.

See also: setTransformContext()

Definition at line 547 of file qgs3dmapsettings.cpp.

◆ viewFrustumVisualizationEnabled()

bool Qgs3DMapSettings::viewFrustumVisualizationEnabled ( ) const

Returns whether the camera's view frustum is visualized on the 2D map canvas.

Since: QGIS 3.26

Definition at line 1348 of file qgs3dmapsettings.cpp.

◆ viewFrustumVisualizationEnabledChanged

void Qgs3DMapSettings::viewFrustumVisualizationEnabledChanged ( )

signal

Emitted when the camera's view frustum visualization on the main 2D map canvas is enabled or disabled.

Since: QGIS 3.26

◆ viewSyncMode()

Qgis::ViewSyncModeFlags Qgs3DMapSettings::viewSyncMode ( ) const

Returns the view sync mode (used to synchronize the 2D main map canvas and the 3D camera navigation)

Since: QGIS 3.26

Definition at line 1334 of file qgs3dmapsettings.cpp.

◆ worldToMapCoordinates()

QgsVector3D Qgs3DMapSettings::worldToMapCoordinates ( const QgsVector3D & worldCoords ) const

Converts 3D world coordinates to map coordinates (applies offset and turns (x,y,z) into (x,-z,y))

Definition at line 526 of file qgs3dmapsettings.cpp.

◆ writeXml()

QDomElement Qgs3DMapSettings::writeXml	(	QDomDocument &	doc,
		const QgsReadWriteContext &	context
	)		const

Writes configuration to a DOM element, to be used later with readXml()

Definition at line 326 of file qgs3dmapsettings.cpp.

The documentation for this class was generated from the following files:

/build/qgis-3.40.0+99sid/src/3d/qgs3dmapsettings.h
/build/qgis-3.40.0+99sid/src/3d/qgs3dmapsettings.cpp

Signals

Public Member Functions

Detailed Description

Constructor & Destructor Documentation

◆ Qgs3DMapSettings() [1/2]

◆ Qgs3DMapSettings() [2/2]

◆ ~Qgs3DMapSettings()

Member Function Documentation

◆ ambientOcclusionSettings()

◆ ambientOcclusionSettingsChanged

◆ axisSettingsChanged

◆ backgroundColor()

◆ backgroundColorChanged

◆ cameraMovementSpeed()

◆ cameraMovementSpeedChanged

◆ cameraNavigationMode()

◆ cameraNavigationModeChanged

◆ configureTerrainFromProject()

◆ crs()

◆ debugDepthMapCorner()

◆ debugDepthMapEnabled()

◆ debugDepthMapSettingsChanged

◆ debugDepthMapSize()

◆ debugOverlayEnabledChanged

◆ debugShadowMapCorner()

◆ debugShadowMapEnabled()

◆ debugShadowMapSettingsChanged

◆ debugShadowMapSize()

◆ directionalLightsChanged

◆ extent()

◆ extentChanged

◆ eyeDomeLightingDistance()

◆ eyeDomeLightingDistanceChanged

◆ eyeDomeLightingEnabled()

◆ eyeDomeLightingEnabledChanged

◆ eyeDomeLightingStrength()

◆ eyeDomeLightingStrengthChanged

◆ fieldOfView()

◆ fieldOfViewChanged

◆ fpsCounterEnabledChanged

◆ get3DAxisSettings()

◆ isDebugOverlayEnabled()

◆ isFpsCounterEnabled()

◆ isSkyboxEnabled()

◆ isTerrainShadingEnabled()

◆ layers()

◆ layersChanged

◆ lightSources()

◆ lightSourcesChanged

◆ mapThemeCollection()

◆ mapTileResolution()

◆ mapTileResolutionChanged

◆ mapToWorldCoordinates()

◆ maxTerrainGroundError()

◆ maxTerrainGroundErrorChanged

◆ maxTerrainScreenError()

◆ maxTerrainScreenErrorChanged

◆ operator=()

◆ origin()

◆ outputDpi()

◆ pathResolver()

◆ pointLightsChanged

◆ projectionType()

◆ projectionTypeChanged

◆ readXml()

◆ renderersChanged

◆ rendererUsage()

◆ resolveReferences()

◆ selectionColor()

◆ selectionColorChanged

◆ set3DAxisSettings()

◆ setAmbientOcclusionSettings()

◆ setBackgroundColor()

◆ setCameraMovementSpeed()

◆ setCameraNavigationMode()

◆ setCrs()

◆ setDebugDepthMapSettings()

◆ setDebugShadowMapSettings()

◆ setExtent()

◆ setEyeDomeLightingDistance()