15#ifndef QGSLABELFEATURE_H
16#define QGSLABELFEATURE_H
90 void setPermissibleZone(
const QgsGeometry &geometry );
115 QSizeF size(
double angle = 0.0 )
const;
193 double zIndex()
const {
return mZIndex; }
228 void setAnchorPosition(
const QgsPointXY &anchorPosition );
436 double overrunDistance()
const;
446 void setOverrunDistance(
double distance );
456 double overrunSmoothDistance()
const;
466 void setOverrunSmoothDistance(
double distance );
666 double mPriority = -1;
670 bool mHasFixedPosition =
false;
674 bool mHasFixedAngle =
false;
676 double mFixedAngle = 0;
678 bool mHasFixedQuadrant =
false;
684 double mDistLabel = 0;
690 double mRepeatDistance = 0;
692 bool mAlwaysShow =
false;
697 double mOverrunDistance = 0;
699 double mOverrunSmoothDistance = 0;
701 Qgis::LabelLinePlacementFlags mArrangementFlags = Qgis::LabelLinePlacementFlags();
716 bool mLabelAllParts =
false;
722 double mLineAnchorPercent = 0.5;
727 bool mAllowDegradedPlacement =
false;
731 double mMinimumSize = 0.0;
LabelOffsetType
Behavior modifier for label offset and distance, only applies in some label placement modes.
@ FromPoint
Offset distance applies from point geometry.
@ AllowPlacementInsideOfPolygon
Labels can be placed inside a polygon feature.
LabelOverlapHandling
Label overlap handling.
@ PreventOverlap
Do not allow labels to overlap other labels.
The QgsAbstractLabelProvider class is an interface class.
This class represents a coordinate reference system (CRS).
The feature class encapsulates a single feature including its unique ID, geometry and a list of field...
A geometry is the spatial representation of a feature.
The QgsLabelFeature class describes a feature that should be used within the labeling engine.
void setMinimumSize(double size)
Sets the minimum size (in map unit) for a feature to be labelled.
QSizeF mSymbolSize
Size of associated rendered symbol, if applicable.
void setDistLabel(double dist)
Applies to "around point" placement strategy or linestring features.
void setAlwaysShow(bool enabled)
Sets whether label should be always shown (sets very high label priority)
QgsPointXY mFixedPosition
fixed position for the label (instead of automatic placement)
QSizeF mRotatedSize
Width and height of the label when rotated between 45 to 135 and 235 to 315 degrees;.
void setRepeatDistance(double dist)
Applies only to linestring features - set after what distance (in map units) the labels should be rep...
Qgis::LabelPolygonPlacementFlags polygonPlacementFlags() const
Returns the polygon placement flags, which dictate how polygon labels can be placed.
QVector< Qgis::LabelPredefinedPointPosition > mPredefinedPositionOrder
Ordered list of predefined positions for label (only for OrderedPositionsAroundPoint placement)
double fixedAngle() const
Angle in radians of the fixed angle (relevant only if hasFixedAngle() returns true)
const QSizeF & symbolSize() const
Returns the size of the rendered symbol associated with this feature, if applicable.
QVector< Qgis::LabelPredefinedPointPosition > predefinedPositionOrder() const
Returns the priority ordered list of predefined positions for label candidates.
double repeatDistance() const
Applies only to linestring features - after what distance (in map units) the labels should be repeate...
void setSymbolSize(QSizeF size)
Sets the size of the rendered symbol associated with this feature.
QgsPointXY positionOffset() const
Applies only to "offset from point" placement strategy.
void setLayer(pal::Layer *layer)
Assign PAL layer to the label feature. Should be only used internally in PAL.
QgsMargins mVisualMargin
Visual margin of label contents.
bool hasFixedQuadrant() const
Returns whether the quadrant for the label is fixed.
void setZIndex(double zIndex)
Sets the label's z-index.
void setLineAnchorType(QgsLabelLineSettings::AnchorType type)
Sets the line anchor type, which dictates how the lineAnchorPercent() setting is handled.
bool hasFixedAngle() const
Whether the label should use a fixed angle instead of using angle from automatic placement.
pal::Layer * layer() const
Gets PAL layer of the label feature. Should be only used internally in PAL.
QgsFeatureId mId
Associated ID unique within the parent label provider.
bool alwaysShow() const
Whether label should be always shown (sets very high label priority)
double lineAnchorPercent() const
Returns the percent along the line at which labels should be placed, for line labels only.
void setOffsetType(Qgis::LabelOffsetType type)
Sets the offset type, which determines how offsets and distance to label behaves.
const GEOSPreparedGeometry * permissibleZonePrepared() const
Returns a GEOS prepared geometry representing the label's permissibleZone().
void setLabelAllParts(bool labelAllParts)
Sets whether all parts of the feature should be labeled.
void setSymbol(const QgsSymbol *symbol)
Sets the feature symbol associated with this label.
void setHasFixedAngle(bool enabled)
Sets whether the label should use a fixed angle instead of using angle from automatic placement.
void setOuterBounds(const QRectF &bounds)
Sets the extreme outer bounds of the label feature, including any surrounding content like borders or...
QgsLabelLineSettings::AnchorType lineAnchorType() const
Returns the line anchor type, which dictates how the lineAnchorPercent() setting is handled.
double distLabel() const
Applies to "around point" placement strategy or linestring features.
GEOSGeometry * geometry() const
Gets access to the associated geometry.
void setPredefinedPositionOrder(const QVector< Qgis::LabelPredefinedPointPosition > &order)
Sets the priority ordered list of predefined positions for label candidates.
bool allowDegradedPlacement() const
Returns true if the label can be placed in inferior fallback positions if it cannot otherwise be plac...
QPointF quadOffset() const
Applies to "offset from point" placement strategy and "around point" (in case hasFixedQuadrant() retu...
QgsGeometry mPermissibleZone
Optional geometry to use for label's permissible zone.
void setPositionOffset(const QgsPointXY &offset)
Applies only to "offset from point" placement strategy.
Qgis::LabelOverlapHandling overlapHandling() const
Returns the technique to use for handling overlapping labels for the feature.
QgsPointXY mPositionOffset
offset of label from the feature (only for "offset from point" placement)
void setOverlapHandling(Qgis::LabelOverlapHandling handling)
Sets the technique to use for handling overlapping labels for the feature.
void setLineAnchorPercent(double percent)
Sets the percent along the line at which labels should be placed, for line labels only.
void setLineAnchorTextPoint(QgsLabelLineSettings::AnchorTextPoint point)
Sets the line anchor text point, which dictates which part of the label text should be placed at the ...
QgsFeatureId id() const
Identifier of the label (unique within the parent label provider)
QPointF mQuadOffset
whether the side of the label is fixed (only for "around point" placement)
QSizeF mSize
Width and height of the label.
double priority() const
Returns the feature's labeling priority.
void setAllowDegradedPlacement(bool allow)
Sets whether the label can be placed in inferior fallback positions if it cannot otherwise be placed.
double zIndex() const
Returns the label's z-index.
void setHasFixedQuadrant(bool enabled)
Sets whether the quadrant for the label must be respected.
void setPriority(double priority)
Sets the priority for labeling the feature.
void setQuadOffset(QPointF quadOffset)
Set which side of the point to use.
double minimumSize() const
Returns the minimum size (in map unit) for a feature to be labelled.
QgsGeometry permissibleZone() const
Returns the label's permissible zone geometry.
bool hasFixedPosition() const
Whether the label should use a fixed position instead of being automatically placed.
void setHasFixedPosition(bool enabled)
Sets whether the label should use a fixed position instead of being automatically placed.
geos::unique_ptr mGeometry
Geometry of the feature to be labelled.
const QgsMargins & visualMargin() const
Returns the visual margin for the label feature.
void setFixedPosition(const QgsPointXY &point)
Sets coordinates of the fixed position (relevant only if hasFixedPosition() returns true)
Qgis::LabelLinePlacementFlags arrangementFlags() const
Returns the feature's arrangement flags.
QString labelText() const
Text of the label.
QRectF mOuterBounds
Extreme outer bounds of the label feature, including any surrounding content like borders or backgrou...
void setArrangementFlags(Qgis::LabelLinePlacementFlags flags)
Sets the feature's arrangement flags.
void setVisualMargin(const QgsMargins &margin)
Sets the visual margin for the label feature.
Qgis::LabelOffsetType offsetType() const
Returns the offset type, which determines how offsets and distance to label behaves.
void setLabelText(const QString &text)
Sets text of the label.
QRectF outerBounds() const
Returns the extreme outer bounds of the label feature, including any surrounding content like borders...
const QgsSymbol * symbol() const
Returns the feature symbol associated with this label.
void setRotatedSize(QSizeF size)
Sets an alternate label size to be used when a label rotation angle is between 45 to 135 and 235 to 3...
void setPolygonPlacementFlags(Qgis::LabelPolygonPlacementFlags flags)
Sets the polygon placement flags, which dictate how polygon labels can be placed.
bool labelAllParts() const
Returns true if all parts of the feature should be labeled.
QString mLabelText
text of the label
QgsPointXY fixedPosition() const
Coordinates of the fixed position (relevant only if hasFixedPosition() returns true)
void setFixedAngle(double angle)
Sets the angle in radians of the fixed angle (relevant only if hasFixedAngle() returns true).
AnchorType
Line anchor types.
@ HintOnly
Line anchor is a hint for preferred placement only, but other placements close to the hint are permit...
AnchorTextPoint
Anchor point of label text.
@ CenterOfText
Anchor using center of text.
Contains settings related to how the label engine treats features as obstacles.
The QgsMargins class defines the four margins of a rectangle.
A class to represent a 2D point.
Contains information about the context of a rendering operation.
Abstract base class for all rendered symbols.
A set of features which influence the labeling process.
std::unique_ptr< const GEOSPreparedGeometry, GeosDeleter > prepared_unique_ptr
Scoped GEOS prepared geometry pointer.
std::unique_ptr< GEOSGeometry, GeosDeleter > unique_ptr
Scoped GEOS pointer.
qint64 QgsFeatureId
64 bit feature ids negative numbers are used for uncommitted/newly added features
const QgsCoordinateReferenceSystem & crs
struct GEOSGeom_t GEOSGeometry