#include <Triangulation.h>

Inheritance diagram for Triangulation:

[legend]

Public Types
enum	ForcedCrossBehavior { SnappingTypeVertex, DeleteFirst, InsertVertex }
	Enumeration describing the behavior, if two forced lines cross. More...

Public Member Functions
virtual	~Triangulation ()=default

virtual void	addLine (const QVector< QgsPoint > &points, QgsInterpolator::SourceType lineType)=0
	Adds a line (e.g. More...

virtual int	addPoint (const QgsPoint &point)=0
	Adds a point to the triangulation. More...

virtual bool	calcNormal (double x, double y, Vector3D *result)=0
	Calculates the normal at a point on the surface and assigns it to 'result'. More...

virtual bool	calcPoint (double x, double y, QgsPoint &result)=0
	Calculates x-, y and z-value of the point on the surface and assigns it to 'result'. More...

virtual void	eliminateHorizontalTriangles ()=0
	Eliminates the horizontal triangles by swapping. More...

virtual int	getNumberOfPoints () const =0
	Returns the number of points. More...

virtual int	getOppositePoint (int p1, int p2)=0
	Returns the number of the point opposite to the triangle points p1, p2 (which have to be on a halfedge). More...

virtual QgsPoint *	getPoint (int i) const =0
	Returns a pointer to the point with number i. Any virtual points must have the number -1. More...

virtual QList< int > *	getPointsAroundEdge (double x, double y)=0
	Returns a value list with the numbers of the four points, which would be affected by an edge swap. More...

virtual QList< int >	getSurroundingTriangles (int pointno)=0
	Returns a pointer to a value list with the information of the triangles surrounding (counterclockwise) a point. More...

virtual bool	getTriangle (double x, double y, QgsPoint &p1, int &n1, QgsPoint &p2, int &n2, QgsPoint &p3, int &n3)=0
	Finds out in which triangle the point with coordinates x and y is and assigns the numbers of the vertices to 'n1', 'n2' and 'n3' and the vertices to 'p1', 'p2' and 'p3'. More...

virtual bool	getTriangle (double x, double y, QgsPoint &p1, QgsPoint &p2, QgsPoint &p3)=0
	Finds out, in which triangle the point with coordinates x and y is and assigns the points at the vertices to 'p1', 'p2' and 'p3. More...

virtual double	getXMax () const =0
	Returns the largest x-coordinate value of the bounding box. More...

virtual double	getXMin () const =0
	Returns the smallest x-coordinate value of the bounding box. More...

virtual double	getYMax () const =0
	Returns the largest y-coordinate value of the bounding box. More...

virtual double	getYMin () const =0
	Returns the smallest x-coordinate value of the bounding box. More...

virtual void	performConsistencyTest ()=0
	Performs a consistency check, remove this later. More...

virtual bool	pointInside (double x, double y)=0
	Returns `true`, if the point with coordinates x and y is inside the convex hull and `false` otherwise. More...

virtual void	ruppertRefinement ()=0
	Adds points to make the triangles better shaped (algorithm of ruppert) More...

virtual bool	saveTriangulation (QgsFeatureSink sink, QgsFeedback feedback=nullptr) const =0
	Saves the triangulation features to a feature sink. More...

virtual void	setBreakEdgeColor (int r, int g, int b)=0
	Sets the color of the breaklines. More...

virtual void	setEdgeColor (int r, int g, int b)=0
	Sets the color of the normal edges. More...

virtual void	setForcedCrossBehavior (Triangulation::ForcedCrossBehavior b)=0
	Draws the points, edges and the forced lines. More...

virtual void	setForcedEdgeColor (int r, int g, int b)=0
	Sets the color of the forced edges. More...

virtual void	setTriangleInterpolator (TriangleInterpolator *interpolator)=0
	Sets an interpolator object. More...

virtual bool	swapEdge (double x, double y)=0
	Reads the content of a taff-file. More...

Static Public Member Functions
static QgsFields	triangulationFields ()
	Returns the fields output by features when calling saveTriangulation(). More...

Detailed Description

Interface for Triangulation classes.

Note: Not available in Python bindings.

Definition at line 38 of file Triangulation.h.

Member Enumeration Documentation

◆ ForcedCrossBehavior

enum Triangulation::ForcedCrossBehavior

Enumeration describing the behavior, if two forced lines cross.

Enumerator
SnappingTypeVertex	The second inserted forced line is snapped to the closest vertice of the first inserted forced line.
DeleteFirst	The status of the first inserted forced line is reset to that of a normal edge (so that the second inserted forced line remain and the first not)
InsertVertex

Definition at line 42 of file Triangulation.h.

Constructor & Destructor Documentation

◆ ~Triangulation()

virtual Triangulation::~Triangulation ( )

virtualdefault

Member Function Documentation

◆ addLine()

virtual void Triangulation::addLine	(	const QVector< QgsPoint > &	points,
		QgsInterpolator::SourceType	lineType
	)

pure virtual

Adds a line (e.g.

a break-, structure- or an isoline) to the triangulation, by specifying a list of source points.

Implemented in DualEdgeTriangulation, and TriDecorator.

◆ addPoint()

virtual int Triangulation::addPoint ( const QgsPoint & point )

pure virtual

Adds a point to the triangulation.

The point should have a z-value matching the value to interpolate.

Implemented in DualEdgeTriangulation, NormVecDecorator, and TriDecorator.

◆ calcNormal()

virtual bool Triangulation::calcNormal	(	double	x,
		double	y,
		Vector3D *	result
	)

pure virtual

Calculates the normal at a point on the surface and assigns it to 'result'.

Returns: true in case of success and false in case of failure

Implemented in DualEdgeTriangulation, NormVecDecorator, and TriDecorator.

◆ calcPoint()

virtual bool Triangulation::calcPoint	(	double	x,
		double	y,
		QgsPoint &	result
	)

pure virtual

Calculates x-, y and z-value of the point on the surface and assigns it to 'result'.

Returns true in case of success and false in case of failure

Implemented in DualEdgeTriangulation, NormVecDecorator, and TriDecorator.

◆ eliminateHorizontalTriangles()

virtual void Triangulation::eliminateHorizontalTriangles ( )

pure virtual

Eliminates the horizontal triangles by swapping.

Implemented in DualEdgeTriangulation, TriDecorator, and NormVecDecorator.

◆ getNumberOfPoints()

virtual int Triangulation::getNumberOfPoints ( ) const

pure virtual

Returns the number of points.

Implemented in DualEdgeTriangulation, and TriDecorator.

◆ getOppositePoint()

virtual int Triangulation::getOppositePoint	(	int	p1,
		int	p2
	)

pure virtual

Returns the number of the point opposite to the triangle points p1, p2 (which have to be on a halfedge).

Returns -1 if point is a virtual point. Returns -10 if point crosses over edges.

Implemented in DualEdgeTriangulation, and TriDecorator.

◆ getPoint()

virtual QgsPoint* Triangulation::getPoint ( int i ) const

pure virtual

Returns a pointer to the point with number i. Any virtual points must have the number -1.

Implemented in DualEdgeTriangulation, and TriDecorator.

◆ getPointsAroundEdge()

virtual QList<int>* Triangulation::getPointsAroundEdge	(	double	x,
		double	y
	)

pure virtual

Returns a value list with the numbers of the four points, which would be affected by an edge swap.

This function is e.g. needed by NormVecDecorator to know the points, for which the normals have to be recalculated. The list has to be deleted by the code which calls this method

Implemented in DualEdgeTriangulation, and TriDecorator.

◆ getSurroundingTriangles()

virtual QList<int> Triangulation::getSurroundingTriangles ( int pointno )

pure virtual

Returns a pointer to a value list with the information of the triangles surrounding (counterclockwise) a point.

Four integer values describe a triangle, the first three are the number of the half edges of the triangle and the fourth is -10, if the third (and most counterclockwise) edge is a breakline, and -20 otherwise. Any virtual point needs to have the number -1

Implemented in DualEdgeTriangulation, and TriDecorator.

◆ getTriangle() [1/2]

virtual bool Triangulation::getTriangle	(	double	x,
		double	y,
		QgsPoint &	p1,
		int &	n1,
		QgsPoint &	p2,
		int &	n2,
		QgsPoint &	p3,
		int &	n3
	)

pure virtual

Finds out in which triangle the point with coordinates x and y is and assigns the numbers of the vertices to 'n1', 'n2' and 'n3' and the vertices to 'p1', 'p2' and 'p3'.

Implemented in DualEdgeTriangulation, and TriDecorator.

◆ getTriangle() [2/2]

virtual bool Triangulation::getTriangle	(	double	x,
		double	y,
		QgsPoint &	p1,
		QgsPoint &	p2,
		QgsPoint &	p3
	)

pure virtual

Finds out, in which triangle the point with coordinates x and y is and assigns the points at the vertices to 'p1', 'p2' and 'p3.

Implemented in DualEdgeTriangulation, and TriDecorator.

◆ getXMax()

virtual double Triangulation::getXMax ( ) const

pure virtual

Returns the largest x-coordinate value of the bounding box.

Implemented in DualEdgeTriangulation, and TriDecorator.

◆ getXMin()

virtual double Triangulation::getXMin ( ) const

pure virtual

Returns the smallest x-coordinate value of the bounding box.

Implemented in DualEdgeTriangulation, and TriDecorator.

◆ getYMax()

virtual double Triangulation::getYMax ( ) const

pure virtual

Returns the largest y-coordinate value of the bounding box.

Implemented in DualEdgeTriangulation, and TriDecorator.

◆ getYMin()

virtual double Triangulation::getYMin ( ) const

pure virtual

Returns the smallest x-coordinate value of the bounding box.

Implemented in DualEdgeTriangulation, and TriDecorator.

◆ performConsistencyTest()

virtual void Triangulation::performConsistencyTest ( )

pure virtual

Performs a consistency check, remove this later.

Implemented in DualEdgeTriangulation, and TriDecorator.

◆ pointInside()

virtual bool Triangulation::pointInside	(	double	x,
		double	y
	)

pure virtual

Returns true, if the point with coordinates x and y is inside the convex hull and false otherwise.

Implemented in DualEdgeTriangulation, and TriDecorator.

◆ ruppertRefinement()

virtual void Triangulation::ruppertRefinement ( )

pure virtual

Adds points to make the triangles better shaped (algorithm of ruppert)

Implemented in DualEdgeTriangulation, and TriDecorator.

◆ saveTriangulation()

virtual bool Triangulation::saveTriangulation	(	QgsFeatureSink *	sink,
		QgsFeedback *	feedback = `nullptr`
	)		const

pure virtual

Saves the triangulation features to a feature sink.

The sink must be setup to accept LineString features, with fields matching those returned by triangulationFields().

Returns: true in case of success

See also: triangulationFields()

Since: QGIS 3.0

Implemented in DualEdgeTriangulation, and NormVecDecorator.

◆ setBreakEdgeColor()

virtual void Triangulation::setBreakEdgeColor	(	int	r,
		int	g,
		int	b
	)

pure virtual

Sets the color of the breaklines.

Implemented in DualEdgeTriangulation, and TriDecorator.

◆ setEdgeColor()

virtual void Triangulation::setEdgeColor	(	int	r,
		int	g,
		int	b
	)

pure virtual

Sets the color of the normal edges.

Implemented in DualEdgeTriangulation, and TriDecorator.

◆ setForcedCrossBehavior()

virtual void Triangulation::setForcedCrossBehavior ( Triangulation::ForcedCrossBehavior b )

pure virtual

Draws the points, edges and the forced lines.

Sets the behavior of the triangulation in case of crossing forced lines

Implemented in DualEdgeTriangulation, and TriDecorator.

◆ setForcedEdgeColor()

virtual void Triangulation::setForcedEdgeColor	(	int	r,
		int	g,
		int	b
	)

pure virtual

Sets the color of the forced edges.

Implemented in DualEdgeTriangulation, and TriDecorator.

◆ setTriangleInterpolator()

virtual void Triangulation::setTriangleInterpolator ( TriangleInterpolator * interpolator )

pure virtual

Sets an interpolator object.

Implemented in DualEdgeTriangulation, TriDecorator, and NormVecDecorator.

◆ swapEdge()

virtual bool Triangulation::swapEdge	(	double	x,
		double	y
	)

pure virtual

Reads the content of a taff-file.

Saves the content to a taff file Swaps the edge which is closest to the point with x and y coordinates (if this is possible)

Implemented in DualEdgeTriangulation, NormVecDecorator, and TriDecorator.

◆ triangulationFields()

QgsFields Triangulation::triangulationFields ( )

static

Returns the fields output by features when calling saveTriangulation().

These fields should be used when creating a suitable feature sink for saveTriangulation()

See also: saveTriangulation()

Since: QGIS 3.0

Definition at line 18 of file Triangulation.cpp.

The documentation for this class was generated from the following files:

/build/qgis-3.14.0+99unstable/src/analysis/interpolation/Triangulation.h
/build/qgis-3.14.0+99unstable/src/analysis/interpolation/Triangulation.cpp

Public Types

Public Member Functions

Static Public Member Functions

Detailed Description

Member Enumeration Documentation

◆ ForcedCrossBehavior

Constructor & Destructor Documentation

◆ ~Triangulation()

Member Function Documentation

◆ addLine()

◆ addPoint()

◆ calcNormal()

◆ calcPoint()

◆ eliminateHorizontalTriangles()

◆ getNumberOfPoints()

◆ getOppositePoint()

◆ getPoint()

◆ getPointsAroundEdge()

◆ getSurroundingTriangles()

◆ getTriangle() [1/2]

◆ getTriangle() [2/2]

◆ getXMax()

◆ getXMin()

◆ getYMax()

◆ getYMin()

◆ performConsistencyTest()

◆ pointInside()

◆ ruppertRefinement()

◆ saveTriangulation()

◆ setBreakEdgeColor()

◆ setEdgeColor()

◆ setForcedCrossBehavior()

◆ setForcedEdgeColor()

◆ setTriangleInterpolator()

◆ swapEdge()

◆ triangulationFields()