.

Работа с проекциями

QGIS allows users to define a global and project-wide CRS (coordinate reference system) for layers without a pre-defined CRS. It also allows the user to define custom coordinate reference systems and supports on-the-fly (OTF) projection of vector and raster layers. All of these features allow the user to display layers with different CRSs and have them overlay properly.

Обзор поддержки проекций

QGIS has support for approximately 2,700 known CRSs. Definitions for each CRS are stored in a SQLite database that is installed with QGIS. Normally, you do not need to manipulate the database directly. In fact, doing so may cause projection support to fail. Custom CRSs are stored in a user database. See section Пользовательские системы координат for information on managing your custom coordinate reference systems.

The CRSs available in QGIS are based on those defined by the European Petroleum Search Group (EPSG) and the Institut Geographique National de France (IGNF) and are largely abstracted from the spatial reference tables used in GDAL. EPSG identifiers are present in the database and can be used to specify a CRS in QGIS.

In order to use OTF projection, either your data must contain information about its coordinate reference system or you will need to define a global, layer or project-wide CRS. For PostGIS layers, QGIS uses the spatial reference identifier that was specified when the layer was created. For data supported by OGR, QGIS relies on the presence of a recognized means of specifying the CRS. In the case of shapefiles, this means a file containing the well-known text (WKT) specification of the CRS. This projection file has the same base name as the shapefile and a .prj extension. For example, a shapefile named alaska.shp would have a corresponding projection file named alaska.prj.

Whenever you select a new CRS, the layer units will automatically be changed in the General tab of the mActionOptions Project Properties dialog under the Project (Gnome, OS X) or Settings (KDE, Windows) menu.

Настройка системы координат по умолчанию

QGIS starts each new project using the global default projection. The global default CRS is EPSG:4326 - WGS 84 (proj=longlat +ellps=WGS84 +datum=WGS84 +no_defs), and it comes predefined in QGIS. This default can be changed via the [Select...] button in the first section, which is used to define the default coordinate reference system for new projects, as shown in figure_projection_1. This choice will be saved for use in subsequent QGIS sessions.

Figure Projection 1:

../../../_images/crsdialog.png

CRS tab in the QGIS Options Dialog nix

When you use layers that do not have a CRS, you need to define how QGIS responds to these layers. This can be done globally or project-wide in the CRS tab under Settings ‣ mActionOptions Options.

На рисунке figure_projection_1 показаны возможные варианты:

  • radiobuttonon Prompt for CRS
  • radiobuttonoff Use project CRS
  • radiobuttonoff Use default CRS displayed below

If you want to define the coordinate reference system for a certain layer without CRS information, you can also do that in the General tab of the raster and vector properties dialog (see General Menu for rasters and Общие for vectors). If your layer already has a CRS defined, it will be displayed as shown in Vector Layer Properties Dialog .

Совет

Установка системы координат из списка слоёв

Right-clicking on a layer in the Map Legend (section Map Legend) provides two CRS shortcuts. Set layer CRS takes you directly to the Coordinate Reference System Selector dialog (see figure_projection_2). Set project CRS from Layer redefines the project CRS using the layer’s CRS.

Перепроецирование «на лету»

QGIS supports OTF reprojection for both raster and vector data. However, OTF is not activated by default. To use OTF projection, you must activate the checkbox Enable on the fly CRS transformation checkbox in the CRS tab of the mActionProjectProperties Project Properties dialog.

There are three ways to do this:

  1. Select mActionOptions Project Properties from the Project (Gnome, OSX) or Settings (KDE, Windows) menu.
  2. Click on the geographic CRS status icon in the lower right-hand corner of the status bar.
  3. Turn OTF on by default in the CRS tab of the Options dialog by selecting checkbox Enable ‘on the fly’ reprojection by default or Automatically enable ‘on the fly’ reprojection if layers have different CRS.

If you have already loaded a layer and you want to enable OTF projection, the best practice is to open the CRS tab of the Project Properties dialog, select a CRS, and activate the checkbox Enable ‘on the fly’ CRS transformation checkbox. The geographic CRS status icon will no longer be greyed out, and all layers will be OTF projected to the CRS shown next to the icon.

Figure Projection 2:

../../../_images/projectionDialog.png

Project Properties Dialog nix

The CRS tab of the Project Properties dialog contains five important components, as shown in Figure_projection_2 and described below:

  1. Enable ‘on the fly’ CRS transformation — This checkbox is used to enable or disable OTF projection. When off, each layer is drawn using the coordinates as read from the data source, and the components described below are inactive. When on, the coordinates in each layer are projected to the coordinate reference system defined for the map canvas.
  2. Filter — If you know the EPSG code, the identifier, or the name for a coordinate reference system, you can use the search feature to find it. Enter the EPSG code, the identifier or the name.
  3. Recently used coordinate reference systems — If you have certain CRSs that you frequently use in your everyday GIS work, these will be displayed in this list. Click on one of these items to select the associated CRS.
  4. Coordinate reference systems of the world — This is a list of all CRSs supported by QGIS, including Geographic, Projected and Custom coordinate reference systems. To define a CRS, select it from the list by expanding the appropriate node and selecting the CRS. The active CRS is preselected.
  5. PROJ.4 text — This is the CRS string used by the PROJ.4 projection engine. This text is read-only and provided for informational purposes.

Совет

Диалоговое окно Свойства проекта

If you open the Project Properties dialog from the Project menu, you must click on the CRS tab to view the CRS settings.

Opening the dialog from the geographic CRS status icon will automatically bring the CRS tab to the front.

Пользовательские системы координат

If QGIS does not provide the coordinate reference system you need, you can define a custom CRS. To define a CRS, select mActionCustomProjection Custom CRS... from the Settings menu. Custom CRSs are stored in your QGIS user database. In addition to your custom CRSs, this database also contains your spatial bookmarks and other custom data.

Figure Projection 3:

../../../_images/customProjectionDialog.png

Custom CRS Dialog nix

Defining a custom CRS in QGIS requires a good understanding of the PROJ.4 projection library. To begin, refer to “Cartographic Projection Procedures for the UNIX Environment - A User’s Manual” by Gerald I. Evenden, U.S. Geological Survey Open-File Report 90-284, 1990 (available at ftp://ftp.remotesensing.org/proj/OF90-284.pdf).

This manual describes the use of the proj.4 and related command line utilities. The cartographic parameters used with proj.4 are described in the user manual and are the same as those used by QGIS.

В диалоговом окне Определение пользовательской системы координат требуется всего два параметра для определения собственной проекции:

  1. A descriptive name
  2. The cartographic parameters in PROJ.4 format

To create a new CRS, click the mIconNew Add new CRS button and enter a descriptive name and the CRS parameters.

Note that the Parameters must begin with a +proj= block, to represent the new coordinate reference system.

You can test your CRS parameters to see if they give sane results. To do this, enter known WGS 84 latitude and longitude values in North and East fields, respectively. Click on [Calculate], and compare the results with the known values in your coordinate reference system.

Default datum transformations

OTF depends on being able to transform data into a ‘default CRS’, and QGIS uses WGS84. For some CRS there are a number of transforms available. QGIS allows you to define the transformation used otherwise QGIS uses a default transformation.

In the CRS tab under Settings ‣ mActionOptions Options you can:

  • set QGIS to ask you when it needs define a transformation using radiobuttonon Ask for datum transformation when no default is defined
  • edit a list of user defaults for transformations.

QGIS asks which transformation to use by opening a dialogue box displaying PROJ.4 text describing the source and destination transforms. Further information may be found by hovering over a transform. User defaults can be saved by selecting radiobuttonon Remember selection.