The QgsLabelFeature class describes a feature that should be used within the labeling engine. More...

#include <qgslabelfeature.h>

Inheritance diagram for QgsLabelFeature:

Public Member Functions
	QgsLabelFeature (QgsFeatureId id, geos::unique_ptr geometry, QSizeF size)
	Constructor for QgsLabelFeature. More...

virtual	~QgsLabelFeature ()

bool	allowDegradedPlacement () const
	Returns `true` if the label can be placed in inferior fallback positions if it cannot otherwise be placed. More...

bool	alwaysShow () const
	Whether label should be always shown (sets very high label priority) More...

QgsPointXY	anchorPosition () const
	In case of quadrand or aligned positioning, this is set to the anchor point. More...

Qgis::LabelLinePlacementFlags	arrangementFlags () const
	Returns the feature's arrangement flags. More...

double	distLabel () const
	Applies to "around point" placement strategy or linestring features. More...

QgsFeature	feature () const
	Returns the original feature associated with this label. More...

double	fixedAngle () const
	Angle in degrees of the fixed angle (relevant only if hasFixedAngle() returns `true`) More...

QgsPointXY	fixedPosition () const
	Coordinates of the fixed position (relevant only if hasFixedPosition() returns `true`) More...

GEOSGeometry *	geometry () const
	Gets access to the associated geometry. More...

bool	hasFixedAngle () const
	Whether the label should use a fixed angle instead of using angle from automatic placement. More...

bool	hasFixedPosition () const
	Whether the label should use a fixed position instead of being automatically placed. More...

bool	hasFixedQuadrant () const
	Returns whether the quadrant for the label is fixed. More...

QgsFeatureId	id () const
	Identifier of the label (unique within the parent label provider) More...

bool	labelAllParts () const
	Returns `true` if all parts of the feature should be labeled. More...

QString	labelText () const
	Text of the label. More...

pal::Layer *	layer () const
	Gets PAL layer of the label feature. Should be only used internally in PAL. More...

double	lineAnchorPercent () const
	Returns the percent along the line at which labels should be placed, for line labels only. More...

QgsLabelLineSettings::AnchorTextPoint	lineAnchorTextPoint () const
	Returns the line anchor text point, which dictates which part of the label text should be placed at the lineAnchorPercent(). More...

QgsLabelLineSettings::AnchorType	lineAnchorType () const
	Returns the line anchor type, which dictates how the lineAnchorPercent() setting is handled. More...

double	minimumSize () const
	Returns the minimum size (in map unit) for a feature to be labelled. More...

const QgsLabelObstacleSettings &	obstacleSettings () const
	Returns the label's obstacle settings. More...

Qgis::LabelOffsetType	offsetType () const
	Returns the offset type, which determines how offsets and distance to label behaves. More...

QgsCoordinateReferenceSystem	originalFeatureCrs () const
	Returns the original layer CRS of the feature associated with the label. More...

QRectF	outerBounds () const
	Returns the extreme outer bounds of the label feature, including any surrounding content like borders or background shapes. More...

Qgis::LabelOverlapHandling	overlapHandling () const
	Returns the technique to use for handling overlapping labels for the feature. More...

double	overrunDistance () const
	Returns the permissible distance (in map units) which labels are allowed to overrun the start or end of linear features. More...

double	overrunSmoothDistance () const
	Returns the distance (in map units) with which the ends of linear features are averaged over when calculating the direction at which to overrun labels. More...

QgsGeometry	permissibleZone () const
	Returns the label's permissible zone geometry. More...

const GEOSPreparedGeometry *	permissibleZonePrepared () const
	Returns a GEOS prepared geometry representing the label's permissibleZone(). More...

Qgis::LabelPolygonPlacementFlags	polygonPlacementFlags () const
	Returns the polygon placement flags, which dictate how polygon labels can be placed. More...

QgsPointXY	positionOffset () const
	Applies only to "offset from point" placement strategy. More...

QVector< Qgis::LabelPredefinedPointPosition >	predefinedPositionOrder () const
	Returns the priority ordered list of predefined positions for label candidates. More...

double	priority () const
	Returns the feature's labeling priority. More...

QgsAbstractLabelProvider *	provider () const
	Returns provider of this instance. More...

QPointF	quadOffset () const
	Applies to "offset from point" placement strategy and "around point" (in case hasFixedQuadrant() returns `true`). More...

double	repeatDistance () const
	Applies only to linestring features - after what distance (in map units) the labels should be repeated (0 = no repetitions) More...

void	setAllowDegradedPlacement (bool allow)
	Sets whether the label can be placed in inferior fallback positions if it cannot otherwise be placed. More...

void	setAlwaysShow (bool enabled)
	Sets whether label should be always shown (sets very high label priority) More...

void	setAnchorPosition (const QgsPointXY &anchorPosition)
	In case of quadrand or aligned positioning, this is set to the anchor point. More...

void	setArrangementFlags (Qgis::LabelLinePlacementFlags flags)
	Sets the feature's arrangement flags. More...

void	setDistLabel (double dist)
	Applies to "around point" placement strategy or linestring features. More...

void	setFeature (const QgsFeature &feature)
	Sets the original feature associated with this label. More...

void	setFixedAngle (double angle)
	Sets angle in degrees of the fixed angle (relevant only if hasFixedAngle() returns `true`) More...

void	setFixedPosition (const QgsPointXY &point)
	Sets coordinates of the fixed position (relevant only if hasFixedPosition() returns `true`) More...

void	setHasFixedAngle (bool enabled)
	Sets whether the label should use a fixed angle instead of using angle from automatic placement. More...

void	setHasFixedPosition (bool enabled)
	Sets whether the label should use a fixed position instead of being automatically placed. More...

void	setHasFixedQuadrant (bool enabled)
	Sets whether the quadrant for the label must be respected. More...

void	setLabelAllParts (bool labelAllParts)
	Sets whether all parts of the feature should be labeled. More...

void	setLabelText (const QString &text)
	Sets text of the label. More...

void	setLayer (pal::Layer *layer)
	Assign PAL layer to the label feature. Should be only used internally in PAL. More...

void	setLineAnchorPercent (double percent)
	Sets the percent along the line at which labels should be placed, for line labels only. More...

void	setLineAnchorTextPoint (QgsLabelLineSettings::AnchorTextPoint point)
	Sets the line anchor text point, which dictates which part of the label text should be placed at the lineAnchorPercent(). More...

void	setLineAnchorType (QgsLabelLineSettings::AnchorType type)
	Sets the line anchor type, which dictates how the lineAnchorPercent() setting is handled. More...

void	setMinimumSize (double size)
	Sets the minimum size (in map unit) for a feature to be labelled. More...

void	setObstacleSettings (const QgsLabelObstacleSettings &settings)
	Sets the label's obstacle settings. More...

void	setOffsetType (Qgis::LabelOffsetType type)
	Sets the offset type, which determines how offsets and distance to label behaves. More...

void	setOriginalFeatureCrs (const QgsCoordinateReferenceSystem &crs)
	Sets the original layer crs of the feature associated with the label. More...

void	setOuterBounds (const QRectF &bounds)
	Sets the extreme outer bounds of the label feature, including any surrounding content like borders or background shapes. More...

void	setOverlapHandling (Qgis::LabelOverlapHandling handling)
	Sets the technique to use for handling overlapping labels for the feature. More...

void	setOverrunDistance (double distance)
	Sets the permissible distance (in map units) which labels are allowed to overrun the start or end of linear features. More...

void	setOverrunSmoothDistance (double distance)
	Sets the distance (in map units) with which the ends of linear features are averaged over when calculating the direction at which to overrun labels. More...

void	setPermissibleZone (const QgsGeometry &geometry)
	Sets the label's permissible zone geometry. More...

void	setPolygonPlacementFlags (Qgis::LabelPolygonPlacementFlags flags)
	Sets the polygon placement flags, which dictate how polygon labels can be placed. More...

void	setPositionOffset (const QgsPointXY &offset)
	Applies only to "offset from point" placement strategy. More...

void	setPredefinedPositionOrder (const QVector< Qgis::LabelPredefinedPointPosition > &order)
	Sets the priority ordered list of predefined positions for label candidates. More...

void	setPriority (double priority)
	Sets the priority for labeling the feature. More...

void	setQuadOffset (QPointF quadOffset)
	Set which side of the point to use. More...

void	setRepeatDistance (double dist)
	Applies only to linestring features - set after what distance (in map units) the labels should be repeated (0 = no repetitions) More...

void	setRotatedSize (QSizeF size)
	Sets an alternate label size to be used when a label rotation angle is between 45 to 135 and 235 to 313 degrees and the text rotation mode is set to rotation-based. More...

void	setSymbol (const QgsSymbol *symbol)
	Sets the feature symbol associated with this label. More...

void	setSymbolSize (QSizeF size)
	Sets the size of the rendered symbol associated with this feature. More...

void	setVisualMargin (const QgsMargins &margin)
	Sets the visual margin for the label feature. More...

void	setZIndex (double zIndex)
	Sets the label's z-index. More...

QSizeF	size (double angle=0.0) const
	Size of the label (in map units) More...

const QgsSymbol *	symbol () const
	Returns the feature symbol associated with this label. More...

const QSizeF &	symbolSize () const
	Returns the size of the rendered symbol associated with this feature, if applicable. More...

const QgsMargins &	visualMargin () const
	Returns the visual margin for the label feature. More...

double	zIndex () const
	Returns the label's z-index. More...

Protected Attributes
bool	mAlwaysShow = false
	whether to always show label - even in case of collisions More...

Qgis::LabelLinePlacementFlags	mArrangementFlags = Qgis::LabelLinePlacementFlags()

double	mDistLabel = 0
	distance of label from the feature (only for "around point" placement or linestrings) More...

double	mFixedAngle = 0
	fixed rotation for the label (instead of automatic choice) More...

QgsPointXY	mFixedPosition
	fixed position for the label (instead of automatic placement) More...

geos::unique_ptr	mGeometry
	Geometry of the feature to be labelled. More...

bool	mHasFixedAngle = false
	whether mFixedAngle should be respected More...

bool	mHasFixedPosition = false
	whether mFixedPosition should be respected More...

bool	mHasFixedQuadrant = false
	whether mQuadOffset should be respected (only for "around point" placement) More...

QgsFeatureId	mId
	Associated ID unique within the parent label provider. More...

QString	mLabelText
	text of the label More...

pal::Layer *	mLayer = nullptr
	Pointer to PAL layer (assigned when registered to PAL) More...

Qgis::LabelOffsetType	mOffsetType = Qgis::LabelOffsetType::FromPoint
	Offset type for certain placement modes. More...

QRectF	mOuterBounds
	Extreme outer bounds of the label feature, including any surrounding content like borders or background shapes. More...

double	mOverrunDistance = 0
	Distance to allow label to overrun linear features. More...

double	mOverrunSmoothDistance = 0
	Distance to smooth angle of line start and end when calculating overruns. More...

QgsGeometry	mPermissibleZone
	Optional geometry to use for label's permissible zone. More...

Qgis::LabelPolygonPlacementFlags	mPolygonPlacementFlags = Qgis::LabelPolygonPlacementFlag::AllowPlacementInsideOfPolygon

QgsPointXY	mPositionOffset
	offset of label from the feature (only for "offset from point" placement) More...

QVector< Qgis::LabelPredefinedPointPosition >	mPredefinedPositionOrder
	Ordered list of predefined positions for label (only for OrderedPositionsAroundPoint placement) More...

double	mPriority = -1
	Priority of the label. More...

QPointF	mQuadOffset
	whether the side of the label is fixed (only for "around point" placement) More...

double	mRepeatDistance = 0
	distance after which label should be repeated (only for linestrings) More...

QSizeF	mRotatedSize
	Width and height of the label when rotated between 45 to 135 and 235 to 315 degrees;. More...

QSizeF	mSize
	Width and height of the label. More...

QSizeF	mSymbolSize
	Size of associated rendered symbol, if applicable. More...

QgsMargins	mVisualMargin
	Visual margin of label contents. More...

double	mZIndex = 0
	Z-index of label (higher z-index labels are rendered on top of lower z-index labels) More...

Detailed Description

The QgsLabelFeature class describes a feature that should be used within the labeling engine.

Those may be the usual textual labels, diagrams, or any other custom type of map annotations (generated by custom label providers).

Instances only contain data relevant to the labeling engine (geometry, label size etc.) necessary for the layout. Rendering of labels is done by label providers.

Individual label providers may create subclasses of QgsLabelFeature in order to add more data to the instances that will be later used for drawing of labels.

Note: this class is not a part of public API yet. See notes in QgsLabelingEngine; not available in Python bindings

Since: QGIS 2.12

Definition at line 56 of file qgslabelfeature.h.

Constructor & Destructor Documentation

◆ QgsLabelFeature()

QgsLabelFeature::QgsLabelFeature	(	QgsFeatureId	id,
		geos::unique_ptr	geometry,
		QSizeF	size
	)

Constructor for QgsLabelFeature.

The feature id argument links the label feature back to the original layer feature.

The geometry argument specifies the geometry associated with the feature, which is used by the labeling engine to generate candidate placements for the label. For a vector layer feature this will generally be the feature's geometry.

The size argument dicates the size of the label's content (e.g. text width and height).

Definition at line 20 of file qgslabelfeature.cpp.

◆ ~QgsLabelFeature()

QgsLabelFeature::~QgsLabelFeature ( )

virtual

Definition at line 27 of file qgslabelfeature.cpp.

Member Function Documentation

◆ allowDegradedPlacement()

bool QgsLabelFeature::allowDegradedPlacement ( ) const

inline

Returns true if the label can be placed in inferior fallback positions if it cannot otherwise be placed.

For instance, this will permit a curved line label to fallback to a horizontal label at the end of the line if the label cannot otherwise be placed on the line in a curved manner.

See also: setAllowDegradedPlacement()

Since: QGIS 3.26

Definition at line 619 of file qgslabelfeature.h.

◆ alwaysShow()

bool QgsLabelFeature::alwaysShow ( ) const

inline

Whether label should be always shown (sets very high label priority)

Definition at line 332 of file qgslabelfeature.h.

◆ anchorPosition()

QgsPointXY QgsLabelFeature::anchorPosition ( ) const

In case of quadrand or aligned positioning, this is set to the anchor point.

This can be used for proper vector based output like DXF.

Since: QGIS 3.12

Definition at line 71 of file qgslabelfeature.cpp.

◆ arrangementFlags()

Qgis::LabelLinePlacementFlags QgsLabelFeature::arrangementFlags ( ) const

inline

Returns the feature's arrangement flags.

See also: setArrangementFlags

Definition at line 340 of file qgslabelfeature.h.

◆ distLabel()

double QgsLabelFeature::distLabel ( ) const

inline

Applies to "around point" placement strategy or linestring features.

Distance of the label from the feature (in map units)

Definition at line 297 of file qgslabelfeature.h.

◆ feature()

QgsFeature QgsLabelFeature::feature ( ) const

Returns the original feature associated with this label.

See also: setFeature()

Since: QGIS 3.10

Definition at line 57 of file qgslabelfeature.cpp.

◆ fixedAngle()

double QgsLabelFeature::fixedAngle ( ) const

inline

Angle in degrees of the fixed angle (relevant only if hasFixedAngle() returns true)

Definition at line 231 of file qgslabelfeature.h.

◆ fixedPosition()

QgsPointXY QgsLabelFeature::fixedPosition ( ) const

inline

Coordinates of the fixed position (relevant only if hasFixedPosition() returns true)

Definition at line 205 of file qgslabelfeature.h.

◆ geometry()

GEOSGeometry * QgsLabelFeature::geometry ( ) const

inline

Gets access to the associated geometry.

Definition at line 79 of file qgslabelfeature.h.

◆ hasFixedAngle()

bool QgsLabelFeature::hasFixedAngle ( ) const

inline

Whether the label should use a fixed angle instead of using angle from automatic placement.

Definition at line 227 of file qgslabelfeature.h.

◆ hasFixedPosition()

bool QgsLabelFeature::hasFixedPosition ( ) const

inline

Whether the label should use a fixed position instead of being automatically placed.

Definition at line 201 of file qgslabelfeature.h.

◆ hasFixedQuadrant()

bool QgsLabelFeature::hasFixedQuadrant ( ) const

inline

Returns whether the quadrant for the label is fixed.

Applies to "around point" placement strategy.

See also: setHasFixedQuadrant; quadOffset

Definition at line 241 of file qgslabelfeature.h.

◆ id()

QgsFeatureId QgsLabelFeature::id ( ) const

inline

Identifier of the label (unique within the parent label provider)

Definition at line 76 of file qgslabelfeature.h.

◆ labelAllParts()

bool QgsLabelFeature::labelAllParts ( ) const

inline

Returns true if all parts of the feature should be labeled.

See also: setLabelAllParts()

Since: QGIS 3.10

Definition at line 527 of file qgslabelfeature.h.

◆ labelText()

QString QgsLabelFeature::labelText ( ) const

inline

Text of the label.

Used also if "merge connected lines to avoid duplicate labels" is enabled to identify which features may be merged.

Definition at line 371 of file qgslabelfeature.h.

◆ layer()

pal::Layer * QgsLabelFeature::layer ( ) const

inline

Gets PAL layer of the label feature. Should be only used internally in PAL.

Definition at line 376 of file qgslabelfeature.h.

◆ lineAnchorPercent()

double QgsLabelFeature::lineAnchorPercent ( ) const

inline

Returns the percent along the line at which labels should be placed, for line labels only.

By default, this is 0.5 which indicates that labels should be placed as close to the center of the line as possible. A value of 0.0 indicates that the labels should be placed as close to the start of the line as possible, while a value of 1.0 pushes labels towards the end of the line.

See also: setLineAnchorPercent(); lineAnchorType()

Since: QGIS 3.16

Definition at line 468 of file qgslabelfeature.h.

◆ lineAnchorTextPoint()

QgsLabelLineSettings::AnchorTextPoint QgsLabelFeature::lineAnchorTextPoint ( ) const

Returns the line anchor text point, which dictates which part of the label text should be placed at the lineAnchorPercent().

See also: setLineAnchorTextPoint()

Since: QGIS 3.26

Definition at line 101 of file qgslabelfeature.cpp.

◆ lineAnchorType()

QgsLabelLineSettings::AnchorType QgsLabelFeature::lineAnchorType ( ) const

inline

Returns the line anchor type, which dictates how the lineAnchorPercent() setting is handled.

See also: setLineAnchorType(); lineAnchorPercent()

Definition at line 491 of file qgslabelfeature.h.

◆ minimumSize()

double QgsLabelFeature::minimumSize ( ) const

inline

Returns the minimum size (in map unit) for a feature to be labelled.

Note: At the moment this is only used when labeling merged lines

See also: minimumSize()

Since: QGIS 3.20

Definition at line 582 of file qgslabelfeature.h.

◆ obstacleSettings()

const QgsLabelObstacleSettings & QgsLabelFeature::obstacleSettings ( ) const

Returns the label's obstacle settings.

See also: setObstacleSettings()

Since: QGIS 3.12

Definition at line 118 of file qgslabelfeature.cpp.

◆ offsetType()

Qgis::LabelOffsetType QgsLabelFeature::offsetType ( ) const

inline

Returns the offset type, which determines how offsets and distance to label behaves.

Support depends on which placement mode is used for generating label candidates.

See also: setOffsetType()

Definition at line 283 of file qgslabelfeature.h.

◆ originalFeatureCrs()

QgsCoordinateReferenceSystem QgsLabelFeature::originalFeatureCrs ( ) const

Returns the original layer CRS of the feature associated with the label.

See also: setOriginalFeatureCrs()

Since: QGIS 3.20

Definition at line 128 of file qgslabelfeature.cpp.

◆ outerBounds()

QRectF QgsLabelFeature::outerBounds ( ) const

inline

Returns the extreme outer bounds of the label feature, including any surrounding content like borders or background shapes.

See also: setOuterBounds()

Since: QGIS 3.30

Definition at line 120 of file qgslabelfeature.h.

◆ overlapHandling()

Qgis::LabelOverlapHandling QgsLabelFeature::overlapHandling ( ) const

inline

Returns the technique to use for handling overlapping labels for the feature.

See also: setOverlapHandling()

Since: QGIS 3.26

Definition at line 599 of file qgslabelfeature.h.

◆ overrunDistance()

double QgsLabelFeature::overrunDistance ( ) const

Returns the permissible distance (in map units) which labels are allowed to overrun the start or end of linear features.

See also: setOverrunDistance(); overrunSmoothDistance()

Since: QGIS 3.10

Definition at line 81 of file qgslabelfeature.cpp.

◆ overrunSmoothDistance()

double QgsLabelFeature::overrunSmoothDistance ( ) const

Returns the distance (in map units) with which the ends of linear features are averaged over when calculating the direction at which to overrun labels.

See also: setOverrunSmoothDistance(); overrunDistance()

Since: QGIS 3.10

Definition at line 91 of file qgslabelfeature.cpp.

◆ permissibleZone()

QgsGeometry QgsLabelFeature::permissibleZone ( ) const

inline

Returns the label's permissible zone geometry.

If a valid geometry is returned, the feature's label MUST be fully contained within this zone, and the feature will not be labeled if no candidates can be generated which are not contained within the zone.

See also: setPermissibleZone(); permissibleZonePrepared()

Since: QGIS 3.0

Definition at line 100 of file qgslabelfeature.h.

◆ permissibleZonePrepared()

const GEOSPreparedGeometry * QgsLabelFeature::permissibleZonePrepared ( ) const

inline

Returns a GEOS prepared geometry representing the label's permissibleZone().

See also: permissibleZone()

Since: QGIS 3.0

Definition at line 108 of file qgslabelfeature.h.

◆ polygonPlacementFlags()

Qgis::LabelPolygonPlacementFlags QgsLabelFeature::polygonPlacementFlags ( ) const

inline

Returns the polygon placement flags, which dictate how polygon labels can be placed.

See also: setPolygonPlacementFlags()

Since: QGIS 3.14

Definition at line 355 of file qgslabelfeature.h.

◆ positionOffset()

QgsPointXY QgsLabelFeature::positionOffset ( ) const

inline

Applies only to "offset from point" placement strategy.

What offset (in map units) to use from the point

Definition at line 269 of file qgslabelfeature.h.

◆ predefinedPositionOrder()

QVector< Qgis::LabelPredefinedPointPosition > QgsLabelFeature::predefinedPositionOrder ( ) const

inline

Returns the priority ordered list of predefined positions for label candidates.

This property is only used for OrderedPositionsAroundPoint placements.

See also: setPredefinedPositionOrder()

Definition at line 310 of file qgslabelfeature.h.

◆ priority()

double QgsLabelFeature::priority ( ) const

inline

Returns the feature's labeling priority.

Returns: feature's priority, as a value between 0 (highest priority) and 1 (lowest priority). Returns -1.0 if feature will use the layer's default priority.

See also: setPriority

Definition at line 172 of file qgslabelfeature.h.

◆ provider()

QgsAbstractLabelProvider * QgsLabelFeature::provider ( ) const

Returns provider of this instance.

Definition at line 630 of file qgslabelingengine.cpp.

◆ quadOffset()

QPointF QgsLabelFeature::quadOffset ( ) const

inline

Applies to "offset from point" placement strategy and "around point" (in case hasFixedQuadrant() returns true).

Determines which side of the point to use. For X coordinate, values -1, 0, 1 mean left, center, right. For Y coordinate, values -1, 0, 1 mean above, center, below.

Definition at line 257 of file qgslabelfeature.h.

◆ repeatDistance()

double QgsLabelFeature::repeatDistance ( ) const

inline

Applies only to linestring features - after what distance (in map units) the labels should be repeated (0 = no repetitions)

Definition at line 323 of file qgslabelfeature.h.

◆ setAllowDegradedPlacement()

void QgsLabelFeature::setAllowDegradedPlacement ( bool allow )

inline

Sets whether the label can be placed in inferior fallback positions if it cannot otherwise be placed.

For instance, this will permit a curved line label to fallback to a horizontal label at the end of the line if the label cannot otherwise be placed on the line in a curved manner.

See also: allowDegradedPlacement()

Since: QGIS 3.26

Definition at line 631 of file qgslabelfeature.h.

◆ setAlwaysShow()

void QgsLabelFeature::setAlwaysShow ( bool enabled )

inline

Sets whether label should be always shown (sets very high label priority)

Definition at line 334 of file qgslabelfeature.h.

◆ setAnchorPosition()

void QgsLabelFeature::setAnchorPosition ( const QgsPointXY & anchorPosition )

In case of quadrand or aligned positioning, this is set to the anchor point.

This can be used for proper vector based output like DXF.

Since: QGIS 3.12

Definition at line 138 of file qgslabelfeature.cpp.

◆ setArrangementFlags()

void QgsLabelFeature::setArrangementFlags ( Qgis::LabelLinePlacementFlags flags )

inline

Sets the feature's arrangement flags.

Parameters

flags arrangement flags

See also: arrangementFlags

Definition at line 347 of file qgslabelfeature.h.

◆ setDistLabel()

void QgsLabelFeature::setDistLabel ( double dist )

inline

Applies to "around point" placement strategy or linestring features.

Set distance of the label from the feature (in map units)

Definition at line 303 of file qgslabelfeature.h.

◆ setFeature()

void QgsLabelFeature::setFeature ( const QgsFeature & feature )

Sets the original feature associated with this label.

See also: feature()

Since: QGIS 3.10

Definition at line 76 of file qgslabelfeature.cpp.

◆ setFixedAngle()

void QgsLabelFeature::setFixedAngle ( double angle )

inline

Sets angle in degrees of the fixed angle (relevant only if hasFixedAngle() returns true)

Definition at line 233 of file qgslabelfeature.h.

◆ setFixedPosition()

void QgsLabelFeature::setFixedPosition ( const QgsPointXY & point )

inline

Sets coordinates of the fixed position (relevant only if hasFixedPosition() returns true)

Definition at line 208 of file qgslabelfeature.h.

◆ setHasFixedAngle()

void QgsLabelFeature::setHasFixedAngle ( bool enabled )

inline

Sets whether the label should use a fixed angle instead of using angle from automatic placement.

Definition at line 229 of file qgslabelfeature.h.

◆ setHasFixedPosition()

void QgsLabelFeature::setHasFixedPosition ( bool enabled )

inline

Sets whether the label should use a fixed position instead of being automatically placed.

Definition at line 203 of file qgslabelfeature.h.

◆ setHasFixedQuadrant()

void QgsLabelFeature::setHasFixedQuadrant ( bool enabled )

inline

Sets whether the quadrant for the label must be respected.

This can be used to fix the quadrant for specific features when using an "around point" placement.

See also: hasFixedQuadrant; quadOffset

Definition at line 249 of file qgslabelfeature.h.

◆ setLabelAllParts()

void QgsLabelFeature::setLabelAllParts ( bool labelAllParts )

inline

Sets whether all parts of the feature should be labeled.

See also: labelAllParts()

Since: QGIS 3.10

Definition at line 534 of file qgslabelfeature.h.

◆ setLabelText()

void QgsLabelFeature::setLabelText ( const QString & text )

inline

Sets text of the label.

Definition at line 373 of file qgslabelfeature.h.

◆ setLayer()

void QgsLabelFeature::setLayer ( pal::Layer * layer )

inline

Assign PAL layer to the label feature. Should be only used internally in PAL.

Definition at line 378 of file qgslabelfeature.h.

◆ setLineAnchorPercent()

void QgsLabelFeature::setLineAnchorPercent ( double percent )

inline

Sets the percent along the line at which labels should be placed, for line labels only.

By default, this is 0.5 which indicates that labels should be placed as close to the center of the line as possible. A value of 0.0 indicates that the labels should be placed as close to the start of the line as possible, while a value of 1.0 pushes labels towards the end of the line.

See also: lineAnchorPercent(); setLineAnchorType()

Since: QGIS 3.16

Definition at line 482 of file qgslabelfeature.h.

◆ setLineAnchorTextPoint()

void QgsLabelFeature::setLineAnchorTextPoint ( QgsLabelLineSettings::AnchorTextPoint point )

inline

Sets the line anchor text point, which dictates which part of the label text should be placed at the lineAnchorPercent().

See also: lineAnchorTextPoint()

Since: QGIS 3.26

Definition at line 520 of file qgslabelfeature.h.

◆ setLineAnchorType()

void QgsLabelFeature::setLineAnchorType ( QgsLabelLineSettings::AnchorType type )

inline

Sets the line anchor type, which dictates how the lineAnchorPercent() setting is handled.

See also: lineAnchorType(); setLineAnchorPercent()

Definition at line 500 of file qgslabelfeature.h.

◆ setMinimumSize()

void QgsLabelFeature::setMinimumSize ( double size )

inline

Sets the minimum size (in map unit) for a feature to be labelled.

Note: At the moment this is only used when labeling merged lines

See also: setMinimumSize()

Since: QGIS 3.20

Definition at line 591 of file qgslabelfeature.h.

◆ setObstacleSettings()

void QgsLabelFeature::setObstacleSettings ( const QgsLabelObstacleSettings & settings )

Sets the label's obstacle settings.

See also: obstacleSettings()

Since: QGIS 3.12

Definition at line 123 of file qgslabelfeature.cpp.

◆ setOffsetType()

void QgsLabelFeature::setOffsetType ( Qgis::LabelOffsetType type )

inline

Sets the offset type, which determines how offsets and distance to label behaves.

Support depends on which placement mode is used for generating label candidates.

See also: offsetType()

Definition at line 291 of file qgslabelfeature.h.

◆ setOriginalFeatureCrs()

void QgsLabelFeature::setOriginalFeatureCrs ( const QgsCoordinateReferenceSystem & crs )

Sets the original layer crs of the feature associated with the label.

See also: originalFeatureCrs()

Since: QGIS 3.20

Definition at line 133 of file qgslabelfeature.cpp.

◆ setOuterBounds()

void QgsLabelFeature::setOuterBounds ( const QRectF & bounds )

inline

Sets the extreme outer bounds of the label feature, including any surrounding content like borders or background shapes.

See also: outerBounds()

Since: QGIS 3.30

Definition at line 129 of file qgslabelfeature.h.

◆ setOverlapHandling()

void QgsLabelFeature::setOverlapHandling ( Qgis::LabelOverlapHandling handling )

inline

Sets the technique to use for handling overlapping labels for the feature.

See also: overlapHandling()

Since: QGIS 3.26

Definition at line 607 of file qgslabelfeature.h.

◆ setOverrunDistance()

void QgsLabelFeature::setOverrunDistance ( double distance )

Sets the permissible distance (in map units) which labels are allowed to overrun the start or end of linear features.

See also: overrunDistance(); setOverrunSmoothDistance()

Since: QGIS 3.10

Definition at line 86 of file qgslabelfeature.cpp.

◆ setOverrunSmoothDistance()

void QgsLabelFeature::setOverrunSmoothDistance ( double distance )

Sets the distance (in map units) with which the ends of linear features are averaged over when calculating the direction at which to overrun labels.

See also: overrunSmoothDistance(); setOverrunDistance()

Since: QGIS 3.10

Definition at line 96 of file qgslabelfeature.cpp.

◆ setPermissibleZone()

void QgsLabelFeature::setPermissibleZone ( const QgsGeometry & geometry )

Sets the label's permissible zone geometry.

If set, the feature's label MUST be fully contained within this zone, and the feature will not be labeled if no candidates can be generated which are not contained within the zone.

Parameters

geometry permissible zone geometry. If an invalid QgsGeometry is passed then no zone limit will be applied to the label candidates (this is the default behavior).

See also: permissibleZone()

Since: QGIS 3.0

Definition at line 36 of file qgslabelfeature.cpp.

◆ setPolygonPlacementFlags()

void QgsLabelFeature::setPolygonPlacementFlags ( Qgis::LabelPolygonPlacementFlags flags )

inline

Sets the polygon placement flags, which dictate how polygon labels can be placed.

See also: polygonPlacementFlags()

Since: QGIS 3.14

Definition at line 363 of file qgslabelfeature.h.

◆ setPositionOffset()

void QgsLabelFeature::setPositionOffset ( const QgsPointXY & offset )

inline

Applies only to "offset from point" placement strategy.

Set what offset (in map units) to use from the point

Definition at line 275 of file qgslabelfeature.h.

◆ setPredefinedPositionOrder()

void QgsLabelFeature::setPredefinedPositionOrder ( const QVector< Qgis::LabelPredefinedPointPosition > & order )

inline

Sets the priority ordered list of predefined positions for label candidates.

This property is only used for OrderedPositionsAroundPoint placements.

See also: predefinedPositionOrder()

Definition at line 317 of file qgslabelfeature.h.

◆ setPriority()

void QgsLabelFeature::setPriority ( double priority )

inline

Sets the priority for labeling the feature.

Parameters

priority feature's priority, as a value between 0 (highest priority) and 1 (lowest priority). Set to -1.0 to use the layer's default priority for this feature.

See also: priority

Definition at line 181 of file qgslabelfeature.h.

◆ setQuadOffset()

void QgsLabelFeature::setQuadOffset ( QPointF quadOffset )

inline

Set which side of the point to use.

See also: quadOffset

Definition at line 263 of file qgslabelfeature.h.

◆ setRepeatDistance()

void QgsLabelFeature::setRepeatDistance ( double dist )

inline

Applies only to linestring features - set after what distance (in map units) the labels should be repeated (0 = no repetitions)

Definition at line 329 of file qgslabelfeature.h.

◆ setRotatedSize()

void QgsLabelFeature::setRotatedSize ( QSizeF size )

inline

Sets an alternate label size to be used when a label rotation angle is between 45 to 135 and 235 to 313 degrees and the text rotation mode is set to rotation-based.

Since: QGIS 3.10

Definition at line 541 of file qgslabelfeature.h.

◆ setSymbol()

void QgsLabelFeature::setSymbol ( const QgsSymbol * symbol )

inline

Sets the feature symbol associated with this label.

Ownership of symbol is not transferred to the label feature, .

See also: symbol()

Since: QGIS 3.10

Definition at line 414 of file qgslabelfeature.h.

◆ setSymbolSize()

void QgsLabelFeature::setSymbolSize ( QSizeF size )

inline

Sets the size of the rendered symbol associated with this feature.

This size is taken into account in certain label placement modes to avoid placing labels over the rendered symbol for this feature.

See also: symbolSize()

Definition at line 155 of file qgslabelfeature.h.

◆ setVisualMargin()

void QgsLabelFeature::setVisualMargin ( const QgsMargins & margin )

inline

Sets the visual margin for the label feature.

The visual margin represents a margin within the label which should not be considered when calculating the positions of candidates for the label feature. It is used in certain label placement modes to adjust the position of candidates so that they all appear to be at visually equal distances from a point feature. For instance, this can be used to place labels which sit above a point so that their baseline rather then the descender of the label is at a preset distance from the point.

Parameters

margin visual margins for label

See also: visualMargin()

Definition at line 141 of file qgslabelfeature.h.

◆ setZIndex()

void QgsLabelFeature::setZIndex ( double zIndex )

inline

Sets the label's z-index.

Higher z-index labels are rendered on top of lower z-index labels.

Parameters

zIndex z-index for label

See also: zIndex()

Since: QGIS 2.14

Definition at line 198 of file qgslabelfeature.h.

◆ size()

QSizeF QgsLabelFeature::size ( double angle = 0.0 ) const

Size of the label (in map units)

Definition at line 62 of file qgslabelfeature.cpp.

◆ symbol()

const QgsSymbol * QgsLabelFeature::symbol ( ) const

inline

Returns the feature symbol associated with this label.

See also: setSymbol()

Since: QGIS 3.10

Definition at line 405 of file qgslabelfeature.h.

◆ symbolSize()

const QSizeF & QgsLabelFeature::symbolSize ( ) const

inline

Returns the size of the rendered symbol associated with this feature, if applicable.

This size is taken into account in certain label placement modes to avoid placing labels over the rendered symbol for this feature. The size will only be set for labels associated with a point feature.

See also: symbolSize()

Definition at line 164 of file qgslabelfeature.h.

◆ visualMargin()

const QgsMargins & QgsLabelFeature::visualMargin ( ) const

inline

Returns the visual margin for the label feature.

See also: setVisualMargin() for details

Definition at line 147 of file qgslabelfeature.h.

◆ zIndex()

double QgsLabelFeature::zIndex ( ) const

inline

Returns the label's z-index.

Higher z-index labels are rendered on top of lower z-index labels.

See also: setZIndex()

Since: QGIS 2.14

Definition at line 189 of file qgslabelfeature.h.

Member Data Documentation

◆ mAlwaysShow

bool QgsLabelFeature::mAlwaysShow = false

protected

whether to always show label - even in case of collisions

Definition at line 680 of file qgslabelfeature.h.

◆ mArrangementFlags

Qgis::LabelLinePlacementFlags QgsLabelFeature::mArrangementFlags = Qgis::LabelLinePlacementFlags()

protected

Definition at line 689 of file qgslabelfeature.h.

◆ mDistLabel

double QgsLabelFeature::mDistLabel = 0

protected

distance of label from the feature (only for "around point" placement or linestrings)

Definition at line 672 of file qgslabelfeature.h.

◆ mFixedAngle

double QgsLabelFeature::mFixedAngle = 0

protected

fixed rotation for the label (instead of automatic choice)

Definition at line 664 of file qgslabelfeature.h.

◆ mFixedPosition

QgsPointXY QgsLabelFeature::mFixedPosition

protected

fixed position for the label (instead of automatic placement)

Definition at line 660 of file qgslabelfeature.h.

◆ mGeometry

geos::unique_ptr QgsLabelFeature::mGeometry

protected

Geometry of the feature to be labelled.

Definition at line 640 of file qgslabelfeature.h.

◆ mHasFixedAngle

bool QgsLabelFeature::mHasFixedAngle = false

protected

whether mFixedAngle should be respected

Definition at line 662 of file qgslabelfeature.h.

◆ mHasFixedPosition

bool QgsLabelFeature::mHasFixedPosition = false

protected

whether mFixedPosition should be respected

Definition at line 658 of file qgslabelfeature.h.

◆ mHasFixedQuadrant

bool QgsLabelFeature::mHasFixedQuadrant = false

protected

whether mQuadOffset should be respected (only for "around point" placement)

Definition at line 666 of file qgslabelfeature.h.

◆ mId

QgsFeatureId QgsLabelFeature::mId

protected

Associated ID unique within the parent label provider.

Definition at line 638 of file qgslabelfeature.h.

◆ mLabelText

QString QgsLabelFeature::mLabelText

protected

text of the label

Definition at line 682 of file qgslabelfeature.h.

◆ mLayer

pal::Layer* QgsLabelFeature::mLayer = nullptr

protected

Pointer to PAL layer (assigned when registered to PAL)

Definition at line 635 of file qgslabelfeature.h.

◆ mOffsetType

Qgis::LabelOffsetType QgsLabelFeature::mOffsetType = Qgis::LabelOffsetType::FromPoint

protected

Offset type for certain placement modes.

Definition at line 674 of file qgslabelfeature.h.

◆ mOuterBounds

QRectF QgsLabelFeature::mOuterBounds

protected

Extreme outer bounds of the label feature, including any surrounding content like borders or background shapes.

Definition at line 648 of file qgslabelfeature.h.

◆ mOverrunDistance

double QgsLabelFeature::mOverrunDistance = 0

protected

Distance to allow label to overrun linear features.

Definition at line 685 of file qgslabelfeature.h.

◆ mOverrunSmoothDistance

double QgsLabelFeature::mOverrunSmoothDistance = 0

protected

Distance to smooth angle of line start and end when calculating overruns.

Definition at line 687 of file qgslabelfeature.h.

◆ mPermissibleZone

QgsGeometry QgsLabelFeature::mPermissibleZone

protected

Optional geometry to use for label's permissible zone.

Definition at line 642 of file qgslabelfeature.h.

◆ mPolygonPlacementFlags

Qgis::LabelPolygonPlacementFlags QgsLabelFeature::mPolygonPlacementFlags = Qgis::LabelPolygonPlacementFlag::AllowPlacementInsideOfPolygon

protected

Definition at line 690 of file qgslabelfeature.h.

◆ mPositionOffset

QgsPointXY QgsLabelFeature::mPositionOffset

protected

offset of label from the feature (only for "offset from point" placement)

Definition at line 670 of file qgslabelfeature.h.

◆ mPredefinedPositionOrder

QVector< Qgis::LabelPredefinedPointPosition > QgsLabelFeature::mPredefinedPositionOrder

protected

Ordered list of predefined positions for label (only for OrderedPositionsAroundPoint placement)

Definition at line 676 of file qgslabelfeature.h.

◆ mPriority

double QgsLabelFeature::mPriority = -1

protected

Priority of the label.

Definition at line 654 of file qgslabelfeature.h.

◆ mQuadOffset

QPointF QgsLabelFeature::mQuadOffset

protected

whether the side of the label is fixed (only for "around point" placement)

Definition at line 668 of file qgslabelfeature.h.

◆ mRepeatDistance

double QgsLabelFeature::mRepeatDistance = 0

protected

distance after which label should be repeated (only for linestrings)

Definition at line 678 of file qgslabelfeature.h.

◆ mRotatedSize

QSizeF QgsLabelFeature::mRotatedSize

protected

Width and height of the label when rotated between 45 to 135 and 235 to 315 degrees;.

Definition at line 646 of file qgslabelfeature.h.

◆ mSize

QSizeF QgsLabelFeature::mSize

protected

Width and height of the label.

Definition at line 644 of file qgslabelfeature.h.

◆ mSymbolSize

QSizeF QgsLabelFeature::mSymbolSize

protected

Size of associated rendered symbol, if applicable.

Definition at line 652 of file qgslabelfeature.h.

◆ mVisualMargin

QgsMargins QgsLabelFeature::mVisualMargin

protected

Visual margin of label contents.

Definition at line 650 of file qgslabelfeature.h.

◆ mZIndex

double QgsLabelFeature::mZIndex = 0

protected

Z-index of label (higher z-index labels are rendered on top of lower z-index labels)

Definition at line 656 of file qgslabelfeature.h.

The documentation for this class was generated from the following files:

/build/qgis-3.32.0+99sid/src/core/labeling/qgslabelfeature.h
/build/qgis-3.32.0+99sid/src/core/labeling/qgslabelfeature.cpp
/build/qgis-3.32.0+99sid/src/core/labeling/qgslabelingengine.cpp

Public Member Functions

Protected Attributes

Detailed Description

Constructor & Destructor Documentation

◆ QgsLabelFeature()

◆ ~QgsLabelFeature()

Member Function Documentation

◆ allowDegradedPlacement()

◆ alwaysShow()

◆ anchorPosition()

◆ arrangementFlags()

◆ distLabel()

◆ feature()

◆ fixedAngle()

◆ fixedPosition()

◆ geometry()

◆ hasFixedAngle()

◆ hasFixedPosition()

◆ hasFixedQuadrant()

◆ id()

◆ labelAllParts()

◆ labelText()

◆ layer()

◆ lineAnchorPercent()

◆ lineAnchorTextPoint()

◆ lineAnchorType()

◆ minimumSize()

◆ obstacleSettings()

◆ offsetType()

◆ originalFeatureCrs()

◆ outerBounds()

◆ overlapHandling()

◆ overrunDistance()

◆ overrunSmoothDistance()

◆ permissibleZone()

◆ permissibleZonePrepared()

◆ polygonPlacementFlags()

◆ positionOffset()

◆ predefinedPositionOrder()

◆ priority()

◆ provider()

◆ quadOffset()

◆ repeatDistance()

◆ setAllowDegradedPlacement()

◆ setAlwaysShow()

◆ setAnchorPosition()

◆ setArrangementFlags()

◆ setDistLabel()

◆ setFeature()

◆ setFixedAngle()

◆ setFixedPosition()

◆ setHasFixedAngle()

◆ setHasFixedPosition()

◆ setHasFixedQuadrant()

◆ setLabelAllParts()

◆ setLabelText()

◆ setLayer()

◆ setLineAnchorPercent()

◆ setLineAnchorTextPoint()

◆ setLineAnchorType()

◆ setMinimumSize()

◆ setObstacleSettings()

◆ setOffsetType()

◆ setOriginalFeatureCrs()

◆ setOuterBounds()

◆ setOverlapHandling()

◆ setOverrunDistance()

◆ setOverrunSmoothDistance()

◆ setPermissibleZone()

◆ setPolygonPlacementFlags()

◆ setPositionOffset()

◆ setPredefinedPositionOrder()

◆ setPriority()

◆ setQuadOffset()

◆ setRepeatDistance()

◆ setRotatedSize()

◆ setSymbol()

◆ setSymbolSize()

◆ setVisualMargin()

◆ setZIndex()