Contains information about the context in which a coordinate transform is executed. More...

#include <qgscoordinatetransformcontext.h>

Public Member Functions
	QgsCoordinateTransformContext ()
	Constructor for QgsCoordinateTransformContext. More...

	QgsCoordinateTransformContext (const QgsCoordinateTransformContext &rhs)
	Copy constructor. More...

	~QgsCoordinateTransformContext ()

bool	addCoordinateOperation (const QgsCoordinateReferenceSystem &sourceCrs, const QgsCoordinateReferenceSystem &destinationCrs, const QString &coordinateOperationProjString, bool allowFallback=true)
	Adds a new coordinateOperationProjString to use when projecting coordinates from the specified sourceCrs to the specified destinationCrs. More...

Q_DECL_DEPRECATED bool	addSourceDestinationDatumTransform (const QgsCoordinateReferenceSystem &sourceCrs, const QgsCoordinateReferenceSystem &destinationCrs, int sourceTransformId, int destinationTransformId)
	Adds a new sourceTransform and destinationTransform to use when projecting coordinates from the specified sourceCrs to the specified destinationCrs. More...

bool	allowFallbackTransform (const QgsCoordinateReferenceSystem &source, const QgsCoordinateReferenceSystem &destination) const
	Returns `true` if approximate "ballpark" transforms may be used when transforming between a source and destination CRS pair, in the case that the preferred coordinate operation fails (such as when coordinates from outside a required grid shift file are transformed). More...

QString	calculateCoordinateOperation (const QgsCoordinateReferenceSystem &source, const QgsCoordinateReferenceSystem &destination) const
	Returns the Proj coordinate operation string to use when transforming from the specified source CRS to destination CRS. More...

Q_DECL_DEPRECATED QgsDatumTransform::TransformPair	calculateDatumTransforms (const QgsCoordinateReferenceSystem &source, const QgsCoordinateReferenceSystem &destination) const
	Returns the pair of source and destination datum transforms to use for a transform from the specified source CRS to destination CRS. More...

void	clear ()
	Clears all stored transform information from the context. More...

QMap< QPair< QString, QString >, QString >	coordinateOperations () const
	Returns the stored mapping for source to destination CRS pairs to associated coordinate operation to use (as a proj string). More...

bool	hasTransform (const QgsCoordinateReferenceSystem &source, const QgsCoordinateReferenceSystem &destination) const
	Returns `true` if the context has a valid coordinate operation to use when transforming from the specified source CRS to destination CRS. More...

bool	mustReverseCoordinateOperation (const QgsCoordinateReferenceSystem &source, const QgsCoordinateReferenceSystem &destination) const
	Returns `true` if the coordinate operation returned by calculateCoordinateOperation() for the source to destination pair must be inverted. More...

QgsCoordinateTransformContext &	operator= (const QgsCoordinateTransformContext &rhs)
	Assignment operator. More...

bool	operator== (const QgsCoordinateTransformContext &rhs) const

void	readSettings ()
	Reads the context's state from application settings. More...

bool	readXml (const QDomElement &element, const QgsReadWriteContext &context, QStringList &missingTransforms)
	Reads the context's state from a DOM element. More...

void	removeCoordinateOperation (const QgsCoordinateReferenceSystem &sourceCrs, const QgsCoordinateReferenceSystem &destinationCrs)
	Removes the coordinate operation for the specified sourceCrs and destinationCrs. More...

Q_DECL_DEPRECATED void	removeSourceDestinationDatumTransform (const QgsCoordinateReferenceSystem &sourceCrs, const QgsCoordinateReferenceSystem &destinationCrs)
	Removes the source to destination datum transform pair for the specified sourceCrs and destinationCrs. More...

Q_DECL_DEPRECATED QMap< QPair< QString, QString >, QgsDatumTransform::TransformPair >	sourceDestinationDatumTransforms () const
	Returns the stored mapping for source to destination CRS pairs to associated datum transforms to use. More...

void	writeSettings ()
	Write the context's state to application settings. More...

void	writeXml (QDomElement &element, const QgsReadWriteContext &context) const
	Writes the context's state to a DOM element. More...

Detailed Description

Contains information about the context in which a coordinate transform is executed.

The context stores various information regarding which coordinate operations should be used when transforming points from a source to destination coordinate reference system.

Note: QgsCoordinateTransformContext objects are thread safe for read and write.; QgsCoordinateTransformContext objects are implicitly shared.

See also: QgsDatumTransform; QgsCoordinateTransform

Since: QGIS 3.0

Definition at line 57 of file qgscoordinatetransformcontext.h.

Constructor & Destructor Documentation

◆ QgsCoordinateTransformContext() [1/2]

QgsCoordinateTransformContext::QgsCoordinateTransformContext ( )

Constructor for QgsCoordinateTransformContext.

Definition at line 40 of file qgscoordinatetransformcontext.cpp.

◆ ~QgsCoordinateTransformContext()

QgsCoordinateTransformContext::~QgsCoordinateTransformContext ( )

default

◆ QgsCoordinateTransformContext() [2/2]

QgsCoordinateTransformContext::QgsCoordinateTransformContext ( const QgsCoordinateTransformContext & rhs )

Copy constructor.

Definition at line 46 of file qgscoordinatetransformcontext.cpp.

Member Function Documentation

◆ addCoordinateOperation()

bool QgsCoordinateTransformContext::addCoordinateOperation	(	const QgsCoordinateReferenceSystem &	sourceCrs,
		const QgsCoordinateReferenceSystem &	destinationCrs,
		const QString &	coordinateOperationProjString,
		bool	allowFallback = `true`
	)

Adds a new coordinateOperationProjString to use when projecting coordinates from the specified sourceCrs to the specified destinationCrs.

coordinateOperationProjString should be set to a valid Proj coordinate operation string. If coordinateOperationProjString is empty, then the default Proj operation will be used when transforming between the coordinate reference systems.

If allowFallback is true (since QGIS 3.12), then "ballpark" fallback transformations will be used in the case that the specified coordinate operation fails (such as when coordinates from outside a required grid shift file are transformed). See QgsCoordinateTransform::fallbackOperationOccurred() for further details. Note that if an existing sourceCrs and destinationCrs pair are added with a different allowFallback value, that value will replace the existing one (i.e. each combination of sourceCrs and destinationCrs must be unique).

Warning: coordinateOperationProjString MUST be a proj string which has been normalized for visualization, and must be constructed so that coordinates are always input and output with x/y coordinate ordering. (Proj strings output by utilities such as projinfo will NOT automatically normalize the axis order!).

Returns true if the new coordinate operation was added successfully.

See also: coordinateOperations(); removeCoordinateOperation()

Note: Requires Proj 6.0 or later. Builds based on earlier Proj versions will ignore this setting, and the deprecated addSourceDestinationDatumTransform() method must be used instead.

Since: QGIS 3.8

Definition at line 105 of file qgscoordinatetransformcontext.cpp.

◆ addSourceDestinationDatumTransform()

bool QgsCoordinateTransformContext::addSourceDestinationDatumTransform	(	const QgsCoordinateReferenceSystem &	sourceCrs,
		const QgsCoordinateReferenceSystem &	destinationCrs,
		int	sourceTransformId,
		int	destinationTransformId
	)

Adds a new sourceTransform and destinationTransform to use when projecting coordinates from the specified sourceCrs to the specified destinationCrs.

If either sourceTransformId or destinationTransformId is -1, then no datum transform is required for transformations for that source or destination.

Returns true if the new transform pair was added successfully.

See also: sourceDestinationDatumTransforms(); removeSourceDestinationDatumTransform()

Deprecated:: Has no effect on builds based on Proj 6.0 or later, use addCoordinateOperation() instead.

Definition at line 96 of file qgscoordinatetransformcontext.cpp.

◆ allowFallbackTransform()

bool QgsCoordinateTransformContext::allowFallbackTransform	(	const QgsCoordinateReferenceSystem &	source,
		const QgsCoordinateReferenceSystem &	destination
	)		const

Returns true if approximate "ballpark" transforms may be used when transforming between a source and destination CRS pair, in the case that the preferred coordinate operation fails (such as when coordinates from outside a required grid shift file are transformed).

See QgsCoordinateTransform::fallbackOperationOccurred() for further details.

Since: QGIS 3.12

Definition at line 158 of file qgscoordinatetransformcontext.cpp.

◆ calculateCoordinateOperation()

QString QgsCoordinateTransformContext::calculateCoordinateOperation	(	const QgsCoordinateReferenceSystem &	source,
		const QgsCoordinateReferenceSystem &	destination
	)		const

Returns the Proj coordinate operation string to use when transforming from the specified source CRS to destination CRS.

Returns an empty string if no specific coordinate operation is set for the source to destination pair, in which case the default Proj coordinate operation should be used.

Note: source and destination are reversible.; Requires Proj 6.0 or later. Builds based on earlier Proj versions will always return an empty string, and the deprecated calculateDatumTransforms() method should be used instead.

Warning: Always check the result of mustReverseCoordinateOperation() in order to determine if the proj coordinate operation string returned by this method corresponds to the reverse operation, and must be manually flipped when calculating coordinate transforms.

Since: QGIS 3.8

Definition at line 142 of file qgscoordinatetransformcontext.cpp.

◆ calculateDatumTransforms()

QgsDatumTransform::TransformPair QgsCoordinateTransformContext::calculateDatumTransforms	(	const QgsCoordinateReferenceSystem &	source,
		const QgsCoordinateReferenceSystem &	destination
	)		const

Returns the pair of source and destination datum transforms to use for a transform from the specified source CRS to destination CRS.

Returns an ID of -1 if a datum transform should not be used for the source or destination.

Note: source and destination are reversible.

Deprecated:: Has no effect on builds based on Proj 6.0 or later. Use calculateCoordinateOperation() instead.

Definition at line 135 of file qgscoordinatetransformcontext.cpp.

◆ clear()

void QgsCoordinateTransformContext::clear ( )

Clears all stored transform information from the context.

Definition at line 69 of file qgscoordinatetransformcontext.cpp.

◆ coordinateOperations()

QMap< QPair< QString, QString >, QString > QgsCoordinateTransformContext::coordinateOperations ( ) const

Returns the stored mapping for source to destination CRS pairs to associated coordinate operation to use (as a proj string).

The map keys will be QgsCoordinateReferenceSystems::authid()s.

Warning: This method should not be used to calculate the corresponding coordinate operation to use for a coordinate transform. Instead, always use calculateCoordinateOperation() to determine this.

See also: addCoordinateOperation()

Note: Requires Proj 6.0 or later. Builds based on earlier Proj versions will always return an empty list, and the deprecated sourceDestinationDatumTransforms() method must be used instead.

Since: QGIS 3.8

Definition at line 83 of file qgscoordinatetransformcontext.cpp.

◆ hasTransform()

bool QgsCoordinateTransformContext::hasTransform	(	const QgsCoordinateReferenceSystem &	source,
		const QgsCoordinateReferenceSystem &	destination
	)		const

Returns true if the context has a valid coordinate operation to use when transforming from the specified source CRS to destination CRS.

Note: source and destination are reversible.

Definition at line 129 of file qgscoordinatetransformcontext.cpp.

◆ mustReverseCoordinateOperation()

bool QgsCoordinateTransformContext::mustReverseCoordinateOperation	(	const QgsCoordinateReferenceSystem &	source,
		const QgsCoordinateReferenceSystem &	destination
	)		const

Returns true if the coordinate operation returned by calculateCoordinateOperation() for the source to destination pair must be inverted.

Since: QGIS 3.10.2

Definition at line 174 of file qgscoordinatetransformcontext.cpp.

◆ operator=()

QgsCoordinateTransformContext & QgsCoordinateTransformContext::operator= ( const QgsCoordinateTransformContext & rhs )

Assignment operator.

Definition at line 50 of file qgscoordinatetransformcontext.cpp.

◆ operator==()

bool QgsCoordinateTransformContext::operator== ( const QgsCoordinateTransformContext & rhs ) const

Definition at line 56 of file qgscoordinatetransformcontext.cpp.

◆ readSettings()

void QgsCoordinateTransformContext::readSettings ( )

Reads the context's state from application settings.

See also: readSettings()

Definition at line 296 of file qgscoordinatetransformcontext.cpp.

◆ readXml()

bool QgsCoordinateTransformContext::readXml	(	const QDomElement &	element,
		const QgsReadWriteContext &	context,
		QStringList &	missingTransforms
	)

Reads the context's state from a DOM element.

Returns false if transforms stored in the XML are not available. In this case missingTransforms will be filled with missing datum transform strings.

See also: writeXml()

Definition at line 198 of file qgscoordinatetransformcontext.cpp.

◆ removeCoordinateOperation()

void QgsCoordinateTransformContext::removeCoordinateOperation	(	const QgsCoordinateReferenceSystem &	sourceCrs,
		const QgsCoordinateReferenceSystem &	destinationCrs
	)

Removes the coordinate operation for the specified sourceCrs and destinationCrs.

Since: QGIS 3.8

Definition at line 124 of file qgscoordinatetransformcontext.cpp.

◆ removeSourceDestinationDatumTransform()

void QgsCoordinateTransformContext::removeSourceDestinationDatumTransform	(	const QgsCoordinateReferenceSystem &	sourceCrs,
		const QgsCoordinateReferenceSystem &	destinationCrs
	)

Removes the source to destination datum transform pair for the specified sourceCrs and destinationCrs.

See also: addSourceDestinationDatumTransform()

Deprecated:: Use removeCoordinateOperation() instead

Definition at line 119 of file qgscoordinatetransformcontext.cpp.

◆ sourceDestinationDatumTransforms()

QMap< QPair< QString, QString >, QgsDatumTransform::TransformPair > QgsCoordinateTransformContext::sourceDestinationDatumTransforms ( ) const

Returns the stored mapping for source to destination CRS pairs to associated datum transforms to use.

The map keys will be QgsCoordinateReferenceSystems::authid()s.

If either the source transform ID or destination transform ID is -1, then no datum transform is required for transformations for that source or destination.

Warning: This method should not be used to calculate the corresponding datum transforms to use for a coordinate transform. Instead, always use calculateDatumTransforms() to determine this.