QGIS API Documentation  3.26.3-Buenos Aires (65e4edfdad)
Public Types | Public Member Functions | Static Public Member Functions | List of all members
QgsTriangulation Class Referenceabstract

Interface for Triangulation classes. More...

#include <qgstriangulation.h>

Inheritance diagram for QgsTriangulation:
Inheritance graph
[legend]

Public Types

enum  ForcedCrossBehavior { SnappingTypeVertex, DeleteFirst, InsertVertex }
 Enumeration describing the behavior, if two forced lines cross. More...
 

Public Member Functions

virtual ~QgsTriangulation ()=default
 
virtual void addLine (const QgsPointSequence &points, QgsInterpolator::SourceType lineType)=0
 Adds a line (e.g. More...
 
virtual int addPoint (const QgsPoint &point)=0
 Adds a point to the triangulation. More...
 
virtual bool calcNormal (double x, double y, QgsPoint &result)=0
 Calculates the normal at a point on the surface and assigns it to 'result'. More...
 
virtual bool calcPoint (double x, double y, QgsPoint &result)=0
 Calculates x-, y and z-value of the point on the surface and assigns it to 'result'. More...
 
virtual void eliminateHorizontalTriangles ()=0
 Eliminates the horizontal triangles by swapping. More...
 
virtual int oppositePoint (int p1, int p2)=0
 Returns the number of the point opposite to the triangle points p1, p2 (which have to be on a halfedge). More...
 
virtual void performConsistencyTest ()=0
 Performs a consistency check, remove this later. More...
 
virtual QgsPointpoint (int i) const =0
 Returns a pointer to the point with number i. More...
 
virtual bool pointInside (double x, double y)=0
 Returns true, if the point with coordinates x and y is inside the convex hull and false otherwise. More...
 
virtual QList< int > pointsAroundEdge (double x, double y)=0
 Returns a value list with the numbers of the four points, which would be affected by an edge swap. More...
 
virtual int pointsCount () const =0
 Returns the number of points. More...
 
virtual void ruppertRefinement ()=0
 Adds points to make the triangles better shaped (algorithm of ruppert) More...
 
virtual bool saveTriangulation (QgsFeatureSink *sink, QgsFeedback *feedback=nullptr) const =0
 Saves the triangulation features to a feature sink. More...
 
virtual void setForcedCrossBehavior (QgsTriangulation::ForcedCrossBehavior b)=0
 Draws the points, edges and the forced lines. More...
 
virtual void setTriangleInterpolator (TriangleInterpolator *interpolator)=0
 Sets an interpolator object. More...
 
virtual QList< int > surroundingTriangles (int pointno)=0
 Returns a value list with the information of the triangles surrounding (counterclockwise) a point. More...
 
virtual bool swapEdge (double x, double y)=0
 Reads the content of a taff-file. More...
 
virtual bool triangleVertices (double x, double y, QgsPoint &p1, int &n1, QgsPoint &p2, int &n2, QgsPoint &p3, int &n3)=0
 Finds out in which triangle the point with coordinates x and y is and assigns the numbers of the vertices to 'n1', 'n2' and 'n3' and the vertices to 'p1', 'p2' and 'p3'. More...
 
virtual bool triangleVertices (double x, double y, QgsPoint &p1, QgsPoint &p2, QgsPoint &p3)=0
 Finds out, in which triangle the point with coordinates x and y is and assigns the points at the vertices to 'p1', 'p2' and 'p3. More...
 
virtual QgsMesh triangulationToMesh (QgsFeedback *feedback=nullptr) const =0
 Returns a QgsMesh corresponding to the triangulation. More...
 
virtual double xMax () const =0
 Returns the largest x-coordinate value of the bounding box. More...
 
virtual double xMin () const =0
 Returns the smallest x-coordinate value of the bounding box. More...
 
virtual double yMax () const =0
 Returns the largest y-coordinate value of the bounding box. More...
 
virtual double yMin () const =0
 Returns the smallest x-coordinate value of the bounding box. More...
 

Static Public Member Functions

static QgsFields triangulationFields ()
 Returns the fields output by features when calling saveTriangulation(). More...
 

Detailed Description

Interface for Triangulation classes.

Note
Not available in Python bindings.
Since
QGIS 3.16

Definition at line 41 of file qgstriangulation.h.

Member Enumeration Documentation

◆ ForcedCrossBehavior

Enumeration describing the behavior, if two forced lines cross.

Enumerator
SnappingTypeVertex 

The second inserted forced line is snapped to the closest vertice of the first inserted forced line.

DeleteFirst 

The status of the first inserted forced line is reset to that of a normal edge (so that the second inserted forced line remain and the first not)

InsertVertex 

Definition at line 45 of file qgstriangulation.h.

Constructor & Destructor Documentation

◆ ~QgsTriangulation()

virtual QgsTriangulation::~QgsTriangulation ( )
virtualdefault

Member Function Documentation

◆ addLine()

virtual void QgsTriangulation::addLine ( const QgsPointSequence points,
QgsInterpolator::SourceType  lineType 
)
pure virtual

Adds a line (e.g.

a break-, structure- or an isoline) to the triangulation, by specifying a list of source points.

Implemented in QgsDualEdgeTriangulation, and TriDecorator.

◆ addPoint()

virtual int QgsTriangulation::addPoint ( const QgsPoint point)
pure virtual

Adds a point to the triangulation.

The point should have a z-value matching the value to interpolate.

Implemented in QgsDualEdgeTriangulation, NormVecDecorator, and TriDecorator.

◆ calcNormal()

virtual bool QgsTriangulation::calcNormal ( double  x,
double  y,
QgsPoint result 
)
pure virtual

Calculates the normal at a point on the surface and assigns it to 'result'.

Returns
true in case of success and false in case of failure

Implemented in QgsDualEdgeTriangulation, NormVecDecorator, and TriDecorator.

◆ calcPoint()

virtual bool QgsTriangulation::calcPoint ( double  x,
double  y,
QgsPoint result 
)
pure virtual

Calculates x-, y and z-value of the point on the surface and assigns it to 'result'.

Returns true in case of success and false in case of failure

Implemented in QgsDualEdgeTriangulation, NormVecDecorator, and TriDecorator.

◆ eliminateHorizontalTriangles()

virtual void QgsTriangulation::eliminateHorizontalTriangles ( )
pure virtual

Eliminates the horizontal triangles by swapping.

Implemented in QgsDualEdgeTriangulation, TriDecorator, and NormVecDecorator.

◆ oppositePoint()

virtual int QgsTriangulation::oppositePoint ( int  p1,
int  p2 
)
pure virtual

Returns the number of the point opposite to the triangle points p1, p2 (which have to be on a halfedge).

Returns -1 if point is a virtual point. Returns -10 if point crosses over edges.

Implemented in QgsDualEdgeTriangulation, and TriDecorator.

◆ performConsistencyTest()

virtual void QgsTriangulation::performConsistencyTest ( )
pure virtual

Performs a consistency check, remove this later.

Implemented in QgsDualEdgeTriangulation, and TriDecorator.

◆ point()

virtual QgsPoint* QgsTriangulation::point ( int  i) const
pure virtual

Returns a pointer to the point with number i.

Implemented in QgsDualEdgeTriangulation, and TriDecorator.

◆ pointInside()

virtual bool QgsTriangulation::pointInside ( double  x,
double  y 
)
pure virtual

Returns true, if the point with coordinates x and y is inside the convex hull and false otherwise.

Implemented in QgsDualEdgeTriangulation, and TriDecorator.

◆ pointsAroundEdge()

virtual QList<int> QgsTriangulation::pointsAroundEdge ( double  x,
double  y 
)
pure virtual

Returns a value list with the numbers of the four points, which would be affected by an edge swap.

This function is e.g. needed by NormVecDecorator to know the points, for which the normals have to be recalculated. The list has to be deleted by the code which calls this method

Implemented in QgsDualEdgeTriangulation, and TriDecorator.

◆ pointsCount()

virtual int QgsTriangulation::pointsCount ( ) const
pure virtual

Returns the number of points.

Implemented in QgsDualEdgeTriangulation, and TriDecorator.

◆ ruppertRefinement()

virtual void QgsTriangulation::ruppertRefinement ( )
pure virtual

Adds points to make the triangles better shaped (algorithm of ruppert)

Implemented in QgsDualEdgeTriangulation, and TriDecorator.

◆ saveTriangulation()

virtual bool QgsTriangulation::saveTriangulation ( QgsFeatureSink sink,
QgsFeedback feedback = nullptr 
) const
pure virtual

Saves the triangulation features to a feature sink.

The sink must be setup to accept LineString features, with fields matching those returned by triangulationFields().

Returns
true in case of success
See also
triangulationFields()
Since
QGIS 3.0

Implemented in QgsDualEdgeTriangulation, and NormVecDecorator.

◆ setForcedCrossBehavior()

virtual void QgsTriangulation::setForcedCrossBehavior ( QgsTriangulation::ForcedCrossBehavior  b)
pure virtual

Draws the points, edges and the forced lines.

Sets the behavior of the triangulation in case of crossing forced lines

Implemented in QgsDualEdgeTriangulation, and TriDecorator.

◆ setTriangleInterpolator()

virtual void QgsTriangulation::setTriangleInterpolator ( TriangleInterpolator interpolator)
pure virtual

Sets an interpolator object.

Implemented in QgsDualEdgeTriangulation, TriDecorator, and NormVecDecorator.

◆ surroundingTriangles()

virtual QList<int> QgsTriangulation::surroundingTriangles ( int  pointno)
pure virtual

Returns a value list with the information of the triangles surrounding (counterclockwise) a point.

Four integer values describe a triangle, the first three are the number of the half edges of the triangle and the fourth is -10, if the third (and most counterclockwise) edge is a breakline, and -20 otherwise. Any virtual point needs to have the number -1

Implemented in QgsDualEdgeTriangulation, and TriDecorator.

◆ swapEdge()

virtual bool QgsTriangulation::swapEdge ( double  x,
double  y 
)
pure virtual

Reads the content of a taff-file.

Saves the content to a taff file Swaps the edge which is closest to the point with x and y coordinates (if this is possible)

Implemented in QgsDualEdgeTriangulation, NormVecDecorator, and TriDecorator.

◆ triangleVertices() [1/2]

virtual bool QgsTriangulation::triangleVertices ( double  x,
double  y,
QgsPoint p1,
int &  n1,
QgsPoint p2,
int &  n2,
QgsPoint p3,
int &  n3 
)
pure virtual

Finds out in which triangle the point with coordinates x and y is and assigns the numbers of the vertices to 'n1', 'n2' and 'n3' and the vertices to 'p1', 'p2' and 'p3'.

Implemented in QgsDualEdgeTriangulation, and TriDecorator.

◆ triangleVertices() [2/2]

virtual bool QgsTriangulation::triangleVertices ( double  x,
double  y,
QgsPoint p1,
QgsPoint p2,
QgsPoint p3 
)
pure virtual

Finds out, in which triangle the point with coordinates x and y is and assigns the points at the vertices to 'p1', 'p2' and 'p3.

Implemented in QgsDualEdgeTriangulation, and TriDecorator.

◆ triangulationFields()

QgsFields QgsTriangulation::triangulationFields ( )
static

Returns the fields output by features when calling saveTriangulation().

These fields should be used when creating a suitable feature sink for saveTriangulation()

See also
saveTriangulation()
Since
QGIS 3.0

Definition at line 18 of file qgstriangulation.cpp.

◆ triangulationToMesh()

virtual QgsMesh QgsTriangulation::triangulationToMesh ( QgsFeedback feedback = nullptr) const
pure virtual

Returns a QgsMesh corresponding to the triangulation.

Since
QGIS 3.16

Implemented in QgsDualEdgeTriangulation, and NormVecDecorator.

◆ xMax()

virtual double QgsTriangulation::xMax ( ) const
pure virtual

Returns the largest x-coordinate value of the bounding box.

Implemented in QgsDualEdgeTriangulation, and TriDecorator.

◆ xMin()

virtual double QgsTriangulation::xMin ( ) const
pure virtual

Returns the smallest x-coordinate value of the bounding box.

Implemented in QgsDualEdgeTriangulation, and TriDecorator.

◆ yMax()

virtual double QgsTriangulation::yMax ( ) const
pure virtual

Returns the largest y-coordinate value of the bounding box.

Implemented in QgsDualEdgeTriangulation, and TriDecorator.

◆ yMin()

virtual double QgsTriangulation::yMin ( ) const
pure virtual

Returns the smallest x-coordinate value of the bounding box.

Implemented in QgsDualEdgeTriangulation, and TriDecorator.


The documentation for this class was generated from the following files: