A geometry is the spatial representation of a feature. More...

#include <qgsgeometry.h>

Inheritance diagram for QgsGeometry:

Classes
class	Error
	A geometry error. More...

Public Member Functions
	QgsGeometry () SIP_HOLDGIL
	Constructor. More...

	QgsGeometry (const QgsGeometry &)
	Copy constructor will prompt a deep copy of the object. More...

	QgsGeometry (QgsAbstractGeometry *geom)
	Creates a geometry from an abstract geometry object. More...

	QgsGeometry (std::unique_ptr< QgsAbstractGeometry > geom)
	Creates a geometry from an abstract geometry object. More...

virtual	~QgsGeometry ()

Qgis::GeometryOperationResult	addPart (const QgsGeometry &newPart)
	Adds a new island polygon to a multipolygon feature. More...

Qgis::GeometryOperationResult	addPart (const QgsPointSequence &points, QgsWkbTypes::GeometryType geomType=QgsWkbTypes::UnknownGeometry)
	Adds a new part to a the geometry. More...

Qgis::GeometryOperationResult	addPart (const QVector< QgsPointXY > &points, QgsWkbTypes::GeometryType geomType=QgsWkbTypes::UnknownGeometry)
	Adds a new part to a the geometry. More...

Qgis::GeometryOperationResult	addPart (QgsAbstractGeometry *part, QgsWkbTypes::GeometryType geomType=QgsWkbTypes::UnknownGeometry)
	Adds a new part to this geometry. More...

Qgis::GeometryOperationResult	addRing (const QVector< QgsPointXY > &ring)
	Adds a new ring to this geometry. More...

Qgis::GeometryOperationResult	addRing (QgsCurve *ring)
	Adds a new ring to this geometry. More...

void	adjacentVertices (int atVertex, int &beforeVertex, int &afterVertex) const
	Returns the indexes of the vertices before and after the given vertex index. More...

double	angleAtVertex (int vertex) const
	Returns the bisector angle for this geometry at the specified vertex. More...

QgsGeometry	applyDashPattern (const QVector< double > &pattern, Qgis::DashPatternLineEndingRule startRule=Qgis::DashPatternLineEndingRule::NoRule, Qgis::DashPatternLineEndingRule endRule=Qgis::DashPatternLineEndingRule::NoRule, Qgis::DashPatternSizeAdjustment adjustment=Qgis::DashPatternSizeAdjustment::ScaleBothDashAndGap, double patternOffset=0) const
	Applies a dash pattern to a geometry, returning a MultiLineString geometry which is the input geometry stroked along each line/ring with the specified pattern. More...

double	area () const
	Returns the planar, 2-dimensional area of the geometry. More...

QVector< QgsGeometry >	asGeometryCollection () const
	Returns contents of the geometry as a list of geometries. More...

QString	asJson (int precision=17) const
	Exports the geometry to a GeoJSON string. More...

virtual json	asJsonObject (int precision=17) const
	Exports the geometry to a json object. More...

QgsMultiPointXY	asMultiPoint () const
	Returns the contents of the geometry as a multi-point. More...

QgsMultiPolygonXY	asMultiPolygon () const
	Returns the contents of the geometry as a multi-polygon. More...

QgsMultiPolylineXY	asMultiPolyline () const
	Returns the contents of the geometry as a multi-linestring. More...

QgsPointXY	asPoint () const
	Returns the contents of the geometry as a 2-dimensional point. More...

QgsPolygonXY	asPolygon () const
	Returns the contents of the geometry as a polygon. More...

QgsPolylineXY	asPolyline () const
	Returns the contents of the geometry as a polyline. More...

QPointF	asQPointF () const SIP_HOLDGIL
	Returns contents of the geometry as a QPointF if wkbType is WKBPoint, otherwise returns a null QPointF. More...

QPolygonF	asQPolygonF () const SIP_HOLDGIL
	Returns contents of the geometry as a QPolygonF. More...

QByteArray	asWkb (QgsAbstractGeometry::WkbFlags flags=QgsAbstractGeometry::WkbFlags()) const
	Export the geometry to WKB. More...

QString	asWkt (int precision=17) const
	Exports the geometry to WKT. More...

int	avoidIntersections (const QList< QgsVectorLayer * > &avoidIntersectionsLayers, const QHash< QgsVectorLayer , QSet< QgsFeatureId > > &ignoreFeatures=(QHash< QgsVectorLayer , QSet< QgsFeatureId > >()))
	Modifies geometry to avoid intersections with the layers specified in project properties. More...

QgsRectangle	boundingBox () const
	Returns the bounding box of the geometry. More...

bool	boundingBoxIntersects (const QgsGeometry &geometry) const
	Returns `true` if the bounding box of this geometry intersects with the bounding box of another geometry. More...

bool	boundingBoxIntersects (const QgsRectangle &rectangle) const
	Returns `true` if the bounding box of this geometry intersects with a rectangle. More...

QgsGeometry	buffer (double distance, int segments) const
	Returns a buffer region around this geometry having the given width and with a specified number of segments used to approximate curves. More...

QgsGeometry	buffer (double distance, int segments, Qgis::EndCapStyle endCapStyle, Qgis::JoinStyle joinStyle, double miterLimit) const
	Returns a buffer region around the geometry, with additional style options. More...

QgsGeometry	centroid () const
	Returns the center of mass of a geometry. More...

QgsGeometry	clipped (const QgsRectangle &rectangle)
	Clips the geometry using the specified rectangle. More...

double	closestSegmentWithContext (const QgsPointXY &point, QgsPointXY &minDistPoint, int &nextVertexIndex, int *leftOrRightOfSegment=nullptr, double epsilon=DEFAULT_SEGMENT_EPSILON) const
	Searches for the closest segment of geometry to the given point. More...

QgsPointXY	closestVertex (const QgsPointXY &point, int &closestVertexIndex, int &previousVertexIndex, int &nextVertexIndex, double &sqrDist) const
	Returns the vertex closest to the given point, the corresponding vertex index, squared distance snap point / target point and the indices of the vertices before and after the closest vertex. More...

double	closestVertexWithContext (const QgsPointXY &point, int &atVertex) const
	Searches for the closest vertex in this geometry to the given point. More...

QVector< QgsGeometry >	coerceToType (QgsWkbTypes::Type type, double defaultZ=0, double defaultM=0) const
	Attempts to coerce this geometry into the specified destination type. More...

QgsGeometry	combine (const QgsGeometry &geometry) const
	Returns a geometry representing all the points in this geometry and other (a union geometry operation). More...

QgsAbstractGeometry::const_part_iterator	const_parts_begin () const
	Returns STL-style const iterator pointing to the first part of the geometry. More...

QgsAbstractGeometry::const_part_iterator	const_parts_end () const
	Returns STL-style iterator pointing to the imaginary part after the last part of the geometry. More...

const QgsAbstractGeometry *	constGet () const SIP_HOLDGIL
	Returns a non-modifiable (const) reference to the underlying abstract geometry primitive. More...

QgsGeometryConstPartIterator	constParts () const
	Returns Java-style iterator for traversal of parts of the geometry. More...

bool	contains (const QgsGeometry &geometry) const
	Returns `true` if the geometry completely contains another geometry. More...

bool	contains (const QgsPointXY *p) const
	Returns `true` if the geometry contains the point p. More...

bool	convertGeometryCollectionToSubclass (QgsWkbTypes::GeometryType geomType)
	Converts geometry collection to a the desired geometry type subclass (multi-point, multi-linestring or multi-polygon). More...

QgsGeometry	convertToCurves (double distanceTolerance=1e-8, double angleTolerance=1e-8) const
	Attempts to convert a non-curved geometry into a curved geometry type (e.g. More...

bool	convertToMultiType ()
	Converts single type geometry into multitype geometry e.g. More...

bool	convertToSingleType ()
	Converts multi type geometry into single type geometry e.g. More...

void	convertToStraightSegment (double tolerance=M_PI/180., QgsAbstractGeometry::SegmentationToleranceType toleranceType=QgsAbstractGeometry::MaximumAngle)
	Converts the geometry to straight line segments, if it is a curved geometry type. More...

QgsGeometry	convertToType (QgsWkbTypes::GeometryType destType, bool destMultipart=false) const
	Try to convert the geometry to the requested type. More...

QgsGeometry	convexHull () const
	Returns the smallest convex polygon that contains all the points in the geometry. More...

bool	crosses (const QgsGeometry &geometry) const
	Returns `true` if the geometry crosses another geometry. More...

QgsGeometry	delaunayTriangulation (double tolerance=0.0, bool edgesOnly=false) const
	Returns the Delaunay triangulation for the vertices of the geometry. More...

bool	deletePart (int partNum)
	Deletes part identified by the part number. More...

bool	deleteRing (int ringNum, int partNum=0)
	Deletes a ring in polygon or multipolygon. More...

bool	deleteVertex (int atVertex)
	Deletes the vertex at the given position number and item (first number is index 0) More...

QgsGeometry	densifyByCount (int extraNodesPerSegment) const
	Returns a copy of the geometry which has been densified by adding the specified number of extra nodes within each segment of the geometry. More...

QgsGeometry	densifyByDistance (double distance) const
	Densifies the geometry by adding regularly placed extra nodes inside each segment so that the maximum distance between any two nodes does not exceed the specified distance. More...

QgsGeometry	difference (const QgsGeometry &geometry) const
	Returns a geometry representing the points making up this geometry that do not make up other. More...

bool	disjoint (const QgsGeometry &geometry) const
	Returns `true` if the geometry is disjoint of another geometry. More...

double	distance (const QgsGeometry &geom) const
	Returns the minimum distance between this geometry and another geometry. More...

double	distanceToVertex (int vertex) const
	Returns the distance along this geometry from its first vertex to the specified vertex. More...

void	draw (QPainter &p) const
	Draws the geometry onto a QPainter. More...

bool	equals (const QgsGeometry &geometry) const
	Test if this geometry is exactly equal to another geometry. More...

QgsGeometry	extendLine (double startDistance, double endDistance) const
	Extends a (multi)line geometry by extrapolating out the start or end of the line by a specified distance. More...

QgsGeometry	extrude (double x, double y)
	Returns an extruded version of this geometry. More...

void	filterVertices (const std::function< bool(const QgsPoint &) > &filter)
	Filters the vertices from the geometry in place, removing any which do not return `true` for the filter function check. More...

QgsGeometry	forcePolygonClockwise () const
	Forces geometries to respect the exterior ring is clockwise, interior rings are counter-clockwise convention. More...

QgsGeometry	forcePolygonCounterClockwise () const
	Forces geometries to respect the exterior ring is counter-clockwise, interior rings are clockwise convention. More...

QgsGeometry	forceRHR () const
	Forces geometries to respect the Right-Hand-Rule, in which the area that is bounded by a polygon is to the right of the boundary. More...

double	frechetDistance (const QgsGeometry &geom) const SIP_THROW(QgsNotSupportedException)
	Returns the Fréchet distance between this geometry and geom, restricted to discrete points for both geometries. More...

double	frechetDistanceDensify (const QgsGeometry &geom, double densifyFraction) const SIP_THROW(QgsNotSupportedException)
	Returns the Fréchet distance between this geometry and geom, restricted to discrete points for both geometries. More...

void	fromWkb (const QByteArray &wkb)
	Set the geometry, feeding in the buffer containing OGC Well-Known Binary. More...

void	fromWkb (unsigned char *wkb, int length)
	Set the geometry, feeding in the buffer containing OGC Well-Known Binary and the buffer's length. More...

QgsAbstractGeometry *	get ()
	Returns a modifiable (non-const) reference to the underlying abstract geometry primitive. More...

double	hausdorffDistance (const QgsGeometry &geom) const
	Returns the Hausdorff distance between this geometry and geom. More...

double	hausdorffDistanceDensify (const QgsGeometry &geom, double densifyFraction) const
	Returns the Hausdorff distance between this geometry and geom. More...

bool	insertVertex (const QgsPoint &point, int beforeVertex)
	Insert a new vertex before the given vertex index, ring and item (first number is index 0) If the requested vertex number (beforeVertex.back()) is greater than the last actual vertex on the requested ring and item, it is assumed that the vertex is to be appended instead of inserted. More...

bool	insertVertex (double x, double y, int beforeVertex)
	Insert a new vertex before the given vertex index, ring and item (first number is index 0) If the requested vertex number (beforeVertex.back()) is greater than the last actual vertex on the requested ring and item, it is assumed that the vertex is to be appended instead of inserted. More...

QgsGeometry	interpolate (double distance) const
	Returns an interpolated point on the geometry at the specified distance. More...

double	interpolateAngle (double distance) const
	Returns the angle parallel to the linestring or polygon boundary at the specified distance along the geometry. More...

QgsGeometry	intersection (const QgsGeometry &geometry) const
	Returns a geometry representing the points shared by this geometry and other. More...

bool	intersects (const QgsGeometry &geometry) const
	Returns `true` if this geometry exactly intersects with another geometry. More...

bool	intersects (const QgsRectangle &rectangle) const
	Returns `true` if this geometry exactly intersects with a rectangle. More...

bool	isAxisParallelRectangle (double maximumDeviation, bool simpleRectanglesOnly=false) const
	Returns `true` if the geometry is a polygon that is almost an axis-parallel rectangle. More...

bool	isEmpty () const
	Returns `true` if the geometry is empty (eg a linestring with no vertices, or a collection with no geometries). More...

bool	isGeosEqual (const QgsGeometry &) const
	Compares the geometry with another geometry using GEOS. More...

bool	isGeosValid (Qgis::GeometryValidityFlags flags=Qgis::GeometryValidityFlags()) const
	Checks validity of the geometry using GEOS. More...

bool	isMultipart () const SIP_HOLDGIL
	Returns `true` if WKB of the geometry is of WKBMulti* type. More...

bool	isNull () const SIP_HOLDGIL
	Returns `true` if the geometry is null (ie, contains no underlying geometry accessible via geometry() ). More...

bool	isSimple () const
	Determines whether the geometry is simple (according to OGC definition), i.e. More...

QgsGeometry	largestEmptyCircle (double tolerance, const QgsGeometry &boundary=QgsGeometry()) const SIP_THROW(QgsNotSupportedException)
	Constructs the Largest Empty Circle for a set of obstacle geometries, up to a specified tolerance. More...

QString	lastError () const SIP_HOLDGIL
	Returns an error string referring to the last error encountered either when this geometry was created or when an operation was performed on the geometry. More...

double	length () const
	Returns the planar, 2-dimensional length of geometry. More...

double	lineLocatePoint (const QgsGeometry &point) const
	Returns a distance representing the location along this linestring of the closest point on this linestring geometry to the specified point. More...

QgsGeometry	makeDifference (const QgsGeometry &other) const
	Returns the geometry formed by modifying this geometry such that it does not intersect the other geometry. More...

int	makeDifferenceInPlace (const QgsGeometry &other)
	Changes this geometry such that it does not intersect the other geometry. More...

QgsGeometry	makeValid () const
	Attempts to make an invalid geometry valid without losing vertices. More...

void	mapToPixel (const QgsMapToPixel &mtp)
	Transforms the geometry from map units to pixels in place. More...

QgsGeometry	mergeLines () const
	Merges any connected lines in a LineString/MultiLineString geometry and converts them to single line strings. More...

QgsGeometry	minimalEnclosingCircle (QgsPointXY &center, double &radius, unsigned int segments=36) const
	Returns the minimal enclosing circle for the geometry. More...

QgsGeometry	minimalEnclosingCircle (unsigned int segments=36) const
	Returns the minimal enclosing circle for the geometry. More...

double	minimumClearance () const SIP_THROW(QgsNotSupportedException)
	Computes the minimum clearance of a geometry. More...

QgsGeometry	minimumClearanceLine () const SIP_THROW(QgsNotSupportedException)
	Returns a LineString whose endpoints define the minimum clearance of a geometry. More...

QgsGeometry	minimumWidth () const SIP_THROW(QgsNotSupportedException)
	Returns a linestring geometry which represents the minimum diameter of the geometry. More...

bool	moveVertex (const QgsPoint &p, int atVertex)
	Moves the vertex at the given position number and item (first number is index 0) to the given coordinates. More...

bool	moveVertex (double x, double y, int atVertex)
	Moves the vertex at the given position number and item (first number is index 0) to the given coordinates. More...

QgsGeometry	nearestPoint (const QgsGeometry &other) const
	Returns the nearest (closest) point on this geometry to another geometry. More...

QgsGeometry	node () const
	Returns a (Multi)LineString representing the fully noded version of a collection of linestrings. More...

void	normalize ()
	Reorganizes the geometry into a normalized form (or "canonical" form). More...

QgsGeometry	offsetCurve (double distance, int segments, Qgis::JoinStyle joinStyle, double miterLimit) const
	Returns an offset line at a given distance and side from an input line. More...

	operator QVariant () const
	Allows direct construction of QVariants from geometry. More...

QgsGeometry &	operator= (QgsGeometry const &rhs)
	Creates a deep copy of the object. More...

QgsGeometry	orientedMinimumBoundingBox () const
	Returns the oriented minimum bounding box for the geometry, which is the smallest (by area) rotated rectangle which fully encompasses the geometry. More...

QgsGeometry	orientedMinimumBoundingBox (double &area, double &angle, double &width, double &height) const
	Returns the oriented minimum bounding box for the geometry, which is the smallest (by area) rotated rectangle which fully encompasses the geometry. More...

QgsGeometry	orthogonalize (double tolerance=1.0E-8, int maxIterations=1000, double angleThreshold=15.0) const
	Attempts to orthogonalize a line or polygon geometry by shifting vertices to make the geometries angles either right angles or flat lines. More...

bool	overlaps (const QgsGeometry &geometry) const
	Returns `true` if the geometry overlaps another geometry. More...

QgsGeometryPartIterator	parts ()
	Returns Java-style iterator for traversal of parts of the geometry. More...

QgsAbstractGeometry::part_iterator	parts_begin ()
	Returns STL-style iterator pointing to the first part of the geometry. More...

QgsAbstractGeometry::part_iterator	parts_end ()
	Returns STL-style iterator pointing to the imaginary part after the last part of the geometry. More...

QgsGeometry	pointOnSurface () const
	Returns a point guaranteed to lie on the surface of a geometry. More...

QgsGeometry	poleOfInaccessibility (double precision, double *distanceToBoundary=nullptr) const
	Calculates the approximate pole of inaccessibility for a surface, which is the most distant internal point from the boundary of the surface. More...

QVector< QgsPointXY >	randomPointsInPolygon (int count, const std::function< bool(const QgsPointXY &) > &acceptPoint, unsigned long seed=0, QgsFeedback *feedback=nullptr, int maxTriesPerPoint=0) const
	Returns a list of count random points generated inside a (multi)polygon geometry (if acceptPoint is specified, and restrictive, the number of points returned may be less than count). More...

QVector< QgsPointXY >	randomPointsInPolygon (int count, unsigned long seed=0, QgsFeedback *feedback=nullptr) const
	Returns a list of count random points generated inside a (multi)polygon geometry. More...

bool	removeDuplicateNodes (double epsilon=4 *std::numeric_limits< double >::epsilon(), bool useZValues=false)
	Removes duplicate nodes from the geometry, wherever removing the nodes does not result in a degenerate geometry. More...

QgsGeometry	removeInteriorRings (double minimumAllowedArea=-1) const
	Removes the interior rings from a (multi)polygon geometry. More...

bool	requiresConversionToStraightSegments () const
	Returns `true` if the geometry is a curved geometry type which requires conversion to display as straight line segments. More...

Qgis::GeometryOperationResult	reshapeGeometry (const QgsLineString &reshapeLineString)
	Replaces a part of this geometry with another line. More...

Qgis::GeometryOperationResult	rotate (double rotation, const QgsPointXY &center)
	Rotate this geometry around the Z axis. More...

QgsGeometry	roundWaves (double wavelength, double amplitude, bool strictWavelength=false) const
	Constructs rounded (sine-like) waves along the boundary of the geometry, with the specified wavelength and amplitude. More...

QgsGeometry	roundWavesRandomized (double minimumWavelength, double maximumWavelength, double minimumAmplitude, double maximumAmplitude, unsigned long seed=0) const
	Constructs randomized rounded (sine-like) waves along the boundary of the geometry, with the specified wavelength and amplitude ranges. More...

void	set (QgsAbstractGeometry *geometry)
	Sets the underlying geometry store. More...

QgsGeometry	sharedPaths (const QgsGeometry &other) const
	Find paths shared between the two given lineal geometries (this and other). More...

QgsGeometry	shortestLine (const QgsGeometry &other) const
	Returns the shortest line joining this geometry to another geometry. More...

QgsGeometry	simplify (double tolerance) const
	Returns a simplified version of this geometry using a specified tolerance value. More...

QgsGeometry	singleSidedBuffer (double distance, int segments, Qgis::BufferSide side, Qgis::JoinStyle joinStyle=Qgis::JoinStyle::Round, double miterLimit=2.0) const
	Returns a single sided buffer for a (multi)line geometry. More...

QgsGeometry	smooth (unsigned int iterations=1, double offset=0.25, double minimumDistance=-1.0, double maxAngle=180.0) const
	Smooths a geometry by rounding off corners using the Chaikin algorithm. More...

QgsGeometry	snappedToGrid (double hSpacing, double vSpacing, double dSpacing=0, double mSpacing=0) const
	Returns a new geometry with all points or vertices snapped to the closest point of the grid. More...

Qgis::GeometryOperationResult	splitGeometry (const QgsCurve *curve, QVector< QgsGeometry > &newGeometries, bool preserveCircular, bool topological, QgsPointSequence &topologyTestPoints, bool splitFeature=true)
	Splits this geometry according to a given curve. More...

Qgis::GeometryOperationResult	splitGeometry (const QgsPointSequence &splitLine, QVector< QgsGeometry > &newGeometries, bool topological, QgsPointSequence &topologyTestPoints, bool splitFeature=true, bool skipIntersectionTest=false)
	Splits this geometry according to a given line. More...

Q_DECL_DEPRECATED Qgis::GeometryOperationResult	splitGeometry (const QVector< QgsPointXY > &splitLine, QVector< QgsGeometry > &newGeometries, bool topological, QVector< QgsPointXY > &topologyTestPoints, bool splitFeature=true)
	Splits this geometry according to a given line. More...

double	sqrDistToVertexAt (QgsPointXY &point SIP_IN, int atVertex) const
	Returns the squared Cartesian distance between the given point to the given vertex index (vertex at the given position number, ring and item (first number is index 0)) More...

QgsGeometry	squareWaves (double wavelength, double amplitude, bool strictWavelength=false) const
	Constructs square waves along the boundary of the geometry, with the specified wavelength and amplitude. More...

QgsGeometry	squareWavesRandomized (double minimumWavelength, double maximumWavelength, double minimumAmplitude, double maximumAmplitude, unsigned long seed=0) const
	Constructs randomized square waves along the boundary of the geometry, with the specified wavelength and amplitude ranges. More...

QgsGeometry	subdivide (int maxNodes=256) const
	Subdivides the geometry. More...

QgsGeometry	symDifference (const QgsGeometry &geometry) const
	Returns a geometry representing the points making up this geometry that do not make up other. More...

QgsGeometry	taperedBuffer (double startWidth, double endWidth, int segments) const
	Calculates a variable width buffer ("tapered buffer") for a (multi)curve geometry. More...

bool	toggleCircularAtVertex (int atVertex)
	Converts the vertex at the given position from/to circular. More...

bool	touches (const QgsGeometry &geometry) const
	Returns `true` if the geometry touches another geometry. More...

Qgis::GeometryOperationResult	transform (const QgsCoordinateTransform &ct, Qgis::TransformDirection direction=Qgis::TransformDirection::Forward, bool transformZ=false) SIP_THROW(QgsCsException)
	Transforms this geometry as described by the coordinate transform ct. More...

Qgis::GeometryOperationResult	transform (const QTransform &t, double zTranslate=0.0, double zScale=1.0, double mTranslate=0.0, double mScale=1.0)
	Transforms the x and y components of the geometry using a QTransform object t. More...

void	transformVertices (const std::function< QgsPoint(const QgsPoint &) > &transform)
	Transforms the vertices from the geometry in place, applying the transform function to every vertex. More...

Qgis::GeometryOperationResult	translate (double dx, double dy, double dz=0.0, double dm=0.0)
	Translates this geometry by dx, dy, dz and dm. More...

QgsGeometry	triangularWaves (double wavelength, double amplitude, bool strictWavelength=false) const
	Constructs triangular waves along the boundary of the geometry, with the specified wavelength and amplitude. More...

QgsGeometry	triangularWavesRandomized (double minimumWavelength, double maximumWavelength, double minimumAmplitude, double maximumAmplitude, unsigned long seed=0) const
	Constructs randomized triangular waves along the boundary of the geometry, with the specified wavelength and amplitude ranges. More...

QgsWkbTypes::GeometryType	type () const SIP_HOLDGIL
	Returns type of the geometry as a QgsWkbTypes::GeometryType. More...

void	validateGeometry (QVector< QgsGeometry::Error > &errors, Qgis::GeometryValidationEngine method=Qgis::GeometryValidationEngine::QgisInternal, Qgis::GeometryValidityFlags flags=Qgis::GeometryValidityFlags()) const
	Validates geometry and produces a list of geometry errors. More...

QgsGeometry	variableWidthBufferByM (int segments) const
	Calculates a variable width buffer for a (multi)linestring geometry, where the width at each node is taken from the linestring m values. More...

QgsPoint	vertexAt (int atVertex) const
	Returns coordinates of a vertex. More...

bool	vertexIdFromVertexNr (int number, QgsVertexId &id) const
	Calculates the vertex ID from a vertex number. More...

int	vertexNrFromVertexId (QgsVertexId id) const
	Returns the vertex number corresponding to a vertex id. More...

QgsVertexIterator	vertices () const
	Returns a read-only, Java-style iterator for traversal of vertices of all the geometry, including all geometry parts and rings. More...

QgsAbstractGeometry::vertex_iterator	vertices_begin () const
	Returns STL-style iterator pointing to the first vertex of the geometry. More...

QgsAbstractGeometry::vertex_iterator	vertices_end () const
	Returns STL-style iterator pointing to the imaginary vertex after the last vertex of the geometry. More...

QgsGeometry	voronoiDiagram (const QgsGeometry &extent=QgsGeometry(), double tolerance=0.0, bool edgesOnly=false) const
	Creates a Voronoi diagram for the nodes contained within the geometry. More...

bool	within (const QgsGeometry &geometry) const
	Returns `true` if the geometry is completely within another geometry. More...

int	wkbSize (QgsAbstractGeometry::WkbFlags flags=QgsAbstractGeometry::WkbFlags()) const
	Returns the length of the QByteArray returned by asWkb() More...

QgsWkbTypes::Type	wkbType () const SIP_HOLDGIL
	Returns type of the geometry as a WKB type (point / linestring / polygon etc.) More...

Static Public Member Functions
static QgsGeometry	collectGeometry (const QVector< QgsGeometry > &geometries)
	Creates a new multipart geometry from a list of QgsGeometry objects. More...

static bool	compare (const QgsMultiPolygonXY &p1, const QgsMultiPolygonXY &p2, double epsilon=4 *std::numeric_limits< double >::epsilon())
	Compares two multipolygons for equality within a specified tolerance. More...

static bool	compare (const QgsPolygonXY &p1, const QgsPolygonXY &p2, double epsilon=4 *std::numeric_limits< double >::epsilon())
	Compares two polygons for equality within a specified tolerance. More...

static bool	compare (const QgsPolylineXY &p1, const QgsPolylineXY &p2, double epsilon=4 *std::numeric_limits< double >::epsilon())
	Compares two polylines for equality within a specified tolerance. More...

static void	convertPointList (const QgsPointSequence &input, QVector< QgsPointXY > &output)
	Downgrades a point list from QgsPoint to QgsPointXY. More...

static void	convertPointList (const QVector< QgsPointXY > &input, QgsPointSequence &output)
	Upgrades a point list from QgsPointXY to QgsPoint. More...

static QgsGeometryEngine *	createGeometryEngine (const QgsAbstractGeometry *geometry)
	Creates and returns a new geometry engine representing the specified geometry. More...

static Q_DECL_DEPRECATED QgsPolygonXY	createPolygonFromQPolygonF (const QPolygonF &polygon)
	Creates a QgsPolygonXYfrom a QPolygonF. More...

static Q_DECL_DEPRECATED QgsPolylineXY	createPolylineFromQPolygonF (const QPolygonF &polygon)
	Creates a QgsPolylineXY from a QPolygonF. More...

static QgsGeometry	createWedgeBuffer (const QgsPoint &center, double azimuth, double angularWidth, double outerRadius, double innerRadius=0)
	Creates a wedge shaped buffer from a center point. More...

static QgsGeometry	fromMultiPointXY (const QgsMultiPointXY &multipoint)
	Creates a new geometry from a QgsMultiPointXY object. More...

static QgsGeometry	fromMultiPolygonXY (const QgsMultiPolygonXY &multipoly)
	Creates a new geometry from a QgsMultiPolygonXY. More...

static QgsGeometry	fromMultiPolylineXY (const QgsMultiPolylineXY &multiline)
	Creates a new geometry from a QgsMultiPolylineXY object. More...

static QgsGeometry	fromPointXY (const QgsPointXY &point) SIP_HOLDGIL
	Creates a new geometry from a QgsPointXY object. More...

static QgsGeometry	fromPolygonXY (const QgsPolygonXY &polygon)
	Creates a new geometry from a QgsPolygonXY. More...

static QgsGeometry	fromPolyline (const QgsPolyline &polyline)
	Creates a new LineString geometry from a list of QgsPoint points. More...

static QgsGeometry	fromPolylineXY (const QgsPolylineXY &polyline)
	Creates a new LineString geometry from a list of QgsPointXY points. More...

static QgsGeometry	fromQPointF (QPointF point) SIP_HOLDGIL
	Construct geometry from a QPointF. More...

static QgsGeometry	fromQPolygonF (const QPolygonF &polygon)
	Construct geometry from a QPolygonF. More...

static QgsGeometry	fromRect (const QgsRectangle &rect) SIP_HOLDGIL
	Creates a new geometry from a QgsRectangle. More...

static QgsGeometry	fromWkt (const QString &wkt)
	Creates a new geometry from a WKT string. More...

static QgsGeometry	polygonize (const QVector< QgsGeometry > &geometries)
	Creates a GeometryCollection geometry containing possible polygons formed from the constituent linework of a set of geometries. More...

static QgsGeometry	unaryUnion (const QVector< QgsGeometry > &geometries)
	Compute the unary union on a list of geometries. More...

Properties
Q_GADGET bool	isNull

QgsWkbTypes::GeometryType	type

Friends
class	QgsInternalGeometryEngine

Detailed Description

A geometry is the spatial representation of a feature.

QgsGeometry acts as a generic container for geometry objects. QgsGeometry objects are implicitly shared, so making copies of geometries is inexpensive. The geometry container class can also be stored inside a QVariant object.

The actual geometry representation is stored as a QgsAbstractGeometry within the container, and can be accessed via the get() method or set using the set() method. This gives access to the underlying raw geometry primitive, such as the point, line, polygon, curve or other geometry subclasses.

Note: QgsGeometry objects are inherently Cartesian/planar geometries. They have no concept of geodesy, and none of the methods or properties exposed from the QgsGeometry API (or QgsAbstractGeometry subclasses) utilize geodesic calculations. Accordingly, properties like length() and area() or spatial operations like buffer() are always calculated using strictly Cartesian mathematics. In contrast, the QgsDistanceArea class exposes methods for working with geodesic calculations and spatial operations on geometries, and should be used whenever calculations which account for the curvature of the Earth (or any other celestial body) are required.

Definition at line 124 of file qgsgeometry.h.

Constructor & Destructor Documentation

◆ QgsGeometry() [1/4]

QgsGeometry::QgsGeometry ( )

Constructor.

Definition at line 66 of file qgsgeometry.cpp.

◆ QgsGeometry() [2/4]

QgsGeometry::QgsGeometry ( const QgsGeometry & other )

Copy constructor will prompt a deep copy of the object.

Definition at line 91 of file qgsgeometry.cpp.

◆ QgsGeometry() [3/4]

QgsGeometry::QgsGeometry ( QgsAbstractGeometry * geom )

explicit

Creates a geometry from an abstract geometry object.

Ownership of geom is transferred.

Since: QGIS 2.10

Definition at line 77 of file qgsgeometry.cpp.

◆ QgsGeometry() [4/4]

QgsGeometry::QgsGeometry ( std::unique_ptr< QgsAbstractGeometry > geom )

explicit

Creates a geometry from an abstract geometry object.

Ownership of geom is transferred.

Note: Not available in Python bindings

Definition at line 84 of file qgsgeometry.cpp.

◆ ~QgsGeometry()

QgsGeometry::~QgsGeometry ( )

virtual

Definition at line 71 of file qgsgeometry.cpp.

Member Function Documentation

◆ addPart() [1/4]

Qgis::GeometryOperationResult QgsGeometry::addPart ( const QgsGeometry & newPart )

Adds a new island polygon to a multipolygon feature.

Returns: OperationResult a result code: success or reason of failure

Note: available in python bindings as addPartGeometry

Definition at line 847 of file qgsgeometry.cpp.

◆ addPart() [2/4]

Qgis::GeometryOperationResult QgsGeometry::addPart	(	const QgsPointSequence &	points,
		QgsWkbTypes::GeometryType	geomType = `QgsWkbTypes::UnknownGeometry`
	)

Adds a new part to a the geometry.

Parameters

points	points describing part to add
geomType	default geometry type to create if no existing geometry

Returns: OperationResult a result code: success or reason of failure

Definition at line 801 of file qgsgeometry.cpp.

◆ addPart() [3/4]

Qgis::GeometryOperationResult QgsGeometry::addPart	(	const QVector< QgsPointXY > &	points,
		QgsWkbTypes::GeometryType	geomType = `QgsWkbTypes::UnknownGeometry`
	)

Adds a new part to a the geometry.

Parameters

points	points describing part to add
geomType	default geometry type to create if no existing geometry

Returns: OperationResult a result code: success or reason of failure

Definition at line 794 of file qgsgeometry.cpp.

◆ addPart() [4/4]

Qgis::GeometryOperationResult QgsGeometry::addPart	(	QgsAbstractGeometry *	part,
		QgsWkbTypes::GeometryType	geomType = `QgsWkbTypes::UnknownGeometry`
	)

Adds a new part to this geometry.

Parameters

part	part to add (ownership is transferred)
geomType	default geometry type to create if no existing geometry

Returns: OperationResult a result code: success or reason of failure

Definition at line 817 of file qgsgeometry.cpp.

◆ addRing() [1/2]

Qgis::GeometryOperationResult QgsGeometry::addRing ( const QVector< QgsPointXY > & ring )

Adds a new ring to this geometry.

This makes only sense for polygon and multipolygons.

Parameters

ring	The ring to be added

Returns: OperationResult a result code: success or reason of failure

Definition at line 775 of file qgsgeometry.cpp.

◆ addRing() [2/2]

Qgis::GeometryOperationResult QgsGeometry::addRing ( QgsCurve * ring )

Adds a new ring to this geometry.

This makes only sense for polygon and multipolygons.

Parameters

ring	The ring to be added

Returns: OperationResult a result code: success or reason of failure

Definition at line 781 of file qgsgeometry.cpp.

◆ adjacentVertices()

void QgsGeometry::adjacentVertices	(	int	atVertex,
		int &	beforeVertex,
		int &	afterVertex
	)		const

Returns the indexes of the vertices before and after the given vertex index.

This function takes into account the following factors:

If the given vertex index is at the end of a linestring,

the adjacent index will be -1 (for "no adjacent vertex")

If the given vertex index is at the end of a linear ring

(such as in a polygon), the adjacent index will take into account the first vertex is equal to the last vertex (and will skip equal vertex positions).

Definition at line 457 of file qgsgeometry.cpp.

◆ angleAtVertex()

double QgsGeometry::angleAtVertex ( int vertex ) const

Returns the bisector angle for this geometry at the specified vertex.

Parameters

vertex vertex index to calculate bisector angle at

Returns: bisector angle, in radians clockwise from north

See also: interpolateAngle()

Since: QGIS 3.0

Definition at line 441 of file qgsgeometry.cpp.

◆ applyDashPattern()

QgsGeometry QgsGeometry::applyDashPattern	(	const QVector< double > &	pattern,
		Qgis::DashPatternLineEndingRule	startRule = `Qgis::DashPatternLineEndingRule::NoRule`,
		Qgis::DashPatternLineEndingRule	endRule = `Qgis::DashPatternLineEndingRule::NoRule`,
		Qgis::DashPatternSizeAdjustment	adjustment = `Qgis::DashPatternSizeAdjustment::ScaleBothDashAndGap`,
		double	patternOffset = `0`
	)		const

Applies a dash pattern to a geometry, returning a MultiLineString geometry which is the input geometry stroked along each line/ring with the specified pattern.

The startRule and endRule options can be set to control how the dash pattern is adjusted at line endings. If a startRule or endRule is set, the adjustment option defines whether both dash and gaps, or only dash or gap sizes are adjusted to apply the rules.

The patternOffset option specifies how far along the pattern the result should start at. The offset is applied AFTER any start/end rules are applied.

Since: QGIS 3.24

Definition at line 1242 of file qgsgeometry.cpp.

◆ area()

double QgsGeometry::area ( ) const

Returns the planar, 2-dimensional area of the geometry.

Warning: QgsGeometry objects are inherently Cartesian/planar geometries, and the area returned by this method is calculated using strictly Cartesian mathematics. In contrast, the QgsDistanceArea class exposes methods for calculating the areas of geometries using geodesic calculations which account for the curvature of the Earth (or any other celestial body).

See also: length()

Since: QGIS 1.5

Definition at line 1891 of file qgsgeometry.cpp.

◆ asGeometryCollection()

QVector< QgsGeometry > QgsGeometry::asGeometryCollection ( ) const

Returns contents of the geometry as a list of geometries.

Since: QGIS 1.1

Definition at line 2764 of file qgsgeometry.cpp.

◆ asJson()

QString QgsGeometry::asJson ( int precision = 17 ) const

Exports the geometry to a GeoJSON string.

Definition at line 1427 of file qgsgeometry.cpp.

◆ asJsonObject()

json QgsGeometry::asJsonObject ( int precision = 17 ) const

virtual

Exports the geometry to a json object.

Note: not available in Python bindings

Since: QGIS 3.8

Definition at line 1432 of file qgsgeometry.cpp.

◆ asMultiPoint()

QgsMultiPointXY QgsGeometry::asMultiPoint ( ) const

Returns the contents of the geometry as a multi-point.

Any z or m values present in the geometry will be discarded.

Warning: If the geometry is not a multi-point type, an empty list will be returned.

Definition at line 1770 of file qgsgeometry.cpp.

◆ asMultiPolygon()

QgsMultiPolygonXY QgsGeometry::asMultiPolygon ( ) const

Returns the contents of the geometry as a multi-polygon.

Any z or m values present in the geometry will be discarded. If the geometry is a curved polygon type (such as a MultiSurface), it will be automatically segmentized.

Warning: If the geometry is not a multi-polygon (or multi-curve polygon) type, an empty list will be returned.

Definition at line 1847 of file qgsgeometry.cpp.

◆ asMultiPolyline()

QgsMultiPolylineXY QgsGeometry::asMultiPolyline ( ) const

Returns the contents of the geometry as a multi-linestring.

Any z or m values present in the geometry will be discarded. If the geometry is a curved line type (such as a MultiCurve), it will be automatically segmentized.

Warning: If the geometry is not a multi-linestring (or multi-curve linestring) type, an empty list will be returned.

Definition at line 1794 of file qgsgeometry.cpp.

◆ asPoint()

QgsPointXY QgsGeometry::asPoint ( ) const

Returns the contents of the geometry as a 2-dimensional point.

Any z or m values present in the geometry will be discarded.

Warning: If the geometry is not a single-point type (or a multipoint containing a single point) an empty QgsPointXY() will be returned.

Definition at line 1673 of file qgsgeometry.cpp.

◆ asPolygon()

QgsPolygonXY QgsGeometry::asPolygon ( ) const

Returns the contents of the geometry as a polygon.

Any z or m values present in the geometry will be discarded. If the geometry is a curved polygon type (such as a CurvePolygon), it will be automatically segmentized.

Warning: If the geometry is not a single-polygon (or single-curve polygon) type, an empty list will be returned.

Definition at line 1735 of file qgsgeometry.cpp.

◆ asPolyline()

QgsPolylineXY QgsGeometry::asPolyline ( ) const

Returns the contents of the geometry as a polyline.

Any z or m values present in the geometry will be discarded. If the geometry is a curved line type (such as a CircularString), it will be automatically segmentized.

Warning: If the geometry is not a single-line (or single-curve) type, an empty list will be returned.

Definition at line 1689 of file qgsgeometry.cpp.

◆ asQPointF()

QPointF QgsGeometry::asQPointF ( ) const

Returns contents of the geometry as a QPointF if wkbType is WKBPoint, otherwise returns a null QPointF.

Since: QGIS 2.7

Definition at line 2790 of file qgsgeometry.cpp.

◆ asQPolygonF()

QPolygonF QgsGeometry::asQPolygonF ( ) const

Returns contents of the geometry as a QPolygonF.

If geometry is a linestring, then the result will be an open QPolygonF. If the geometry is a polygon, then the result will be a closed QPolygonF of the geometry's exterior ring.

If the geometry is a multi-part geometry, then only the first part will be considered when converting to a QPolygonF.

Since: QGIS 2.7

Definition at line 2796 of file qgsgeometry.cpp.

◆ asWkb()

QByteArray QgsGeometry::asWkb ( QgsAbstractGeometry::WkbFlags flags = QgsAbstractGeometry::WkbFlags() ) const

Export the geometry to WKB.

The optional flags argument specifies flags controlling WKB export behavior (since QGIS 3.14).

Since: QGIS 3.0

Definition at line 2759 of file qgsgeometry.cpp.

◆ asWkt()

QString QgsGeometry::asWkt ( int precision = 17 ) const

Exports the geometry to WKT.

Returns: true in case of success and false else

Note: precision parameter added in QGIS 2.4

Definition at line 1418 of file qgsgeometry.cpp.

◆ avoidIntersections()

int QgsGeometry::avoidIntersections	(	const QList< QgsVectorLayer * > &	avoidIntersectionsLayers,
		const QHash< QgsVectorLayer *, QSet< QgsFeatureId > > &	ignoreFeatures = `( QHash<QgsVectorLayer *, QSet<QgsFeatureId> >() )`
	)

Modifies geometry to avoid intersections with the layers specified in project properties.

Parameters

avoidIntersectionsLayers	list of layers to check for intersections
ignoreFeatures	possibility to give a list of features where intersections should be ignored (not available in Python bindings)

Returns: 0 in case of success, 1 if geometry is not of polygon type, 2 if avoid intersection would change the geometry type, 3 at least one geometry intersected is invalid. The algorithm may not work and return the same geometry as the input. You must fix your intersecting geometries.

Since: QGIS 1.5

Definition at line 2846 of file qgsgeometry.cpp.

◆ boundingBox()

QgsRectangle QgsGeometry::boundingBox ( ) const

Returns the bounding box of the geometry.

See also: orientedMinimumBoundingBox()

Definition at line 1091 of file qgsgeometry.cpp.

◆ boundingBoxIntersects() [1/2]

bool QgsGeometry::boundingBoxIntersects ( const QgsGeometry & geometry ) const

Returns true if the bounding box of this geometry intersects with the bounding box of another geometry.

Since this test only considers the bounding box of the geometries, is is very fast to calculate and handles invalid geometries.

See also: intersects()

Since: QGIS 3.0

Definition at line 1304 of file qgsgeometry.cpp.

◆ boundingBoxIntersects() [2/2]

bool QgsGeometry::boundingBoxIntersects ( const QgsRectangle & rectangle ) const

Returns true if the bounding box of this geometry intersects with a rectangle.

Since this test only considers the bounding box of the geometry, is is very fast to calculate and handles invalid geometries.

See also: intersects()

Since: QGIS 3.0

Definition at line 1294 of file qgsgeometry.cpp.

◆ buffer() [1/2]

QgsGeometry QgsGeometry::buffer	(	double	distance,
		int	segments
	)		const

Returns a buffer region around this geometry having the given width and with a specified number of segments used to approximate curves.

See also: singleSidedBuffer(); taperedBuffer()

Definition at line 2061 of file qgsgeometry.cpp.

◆ buffer() [2/2]

QgsGeometry QgsGeometry::buffer	(	double	distance,
		int	segments,
		Qgis::EndCapStyle	endCapStyle,
		Qgis::JoinStyle	joinStyle,
		double	miterLimit
	)		const

Returns a buffer region around the geometry, with additional style options.

Parameters

distance	buffer distance
segments	for round joins, number of segments to approximate quarter-circle
endCapStyle	end cap style
joinStyle	join style for corners in geometry
miterLimit	limit on the miter ratio used for very sharp corners (JoinStyleMiter only)

See also: singleSidedBuffer(); taperedBuffer()

Since: QGIS 2.4

Definition at line 2080 of file qgsgeometry.cpp.

◆ centroid()

QgsGeometry QgsGeometry::centroid ( ) const

Returns the center of mass of a geometry.

If the input is a NULL geometry, the output will also be a NULL geometry.

If an error was encountered while creating the result, more information can be retrieved by calling lastError() on the returned geometry.

Note: for line based geometries, the center point of the line is returned, and for point based geometries, the point itself is returned

See also: pointOnSurface(); poleOfInaccessibility()

Definition at line 2295 of file qgsgeometry.cpp.

◆ clipped()

QgsGeometry QgsGeometry::clipped ( const QgsRectangle & rectangle )

Clips the geometry using the specified rectangle.

Performs a fast, non-robust intersection between the geometry and a rectangle. The returned geometry may be invalid.

Since: QGIS 3.0

Definition at line 3172 of file qgsgeometry.cpp.

◆ closestSegmentWithContext()

double QgsGeometry::closestSegmentWithContext	(	const QgsPointXY &	point,
		QgsPointXY &	minDistPoint,
		int &	nextVertexIndex,
		int *	leftOrRightOfSegment = `nullptr`,
		double	epsilon = `DEFAULT_SEGMENT_EPSILON`
	)		const

Searches for the closest segment of geometry to the given point.

Parameters

point	Specifies the point for search
minDistPoint	Receives the nearest point on the segment
nextVertexIndex	Receives index of the next vertex after the closest segment. The vertex before the closest segment is always nextVertexIndex - 1
leftOrRightOfSegment	Out: Returns if the point is located on the left or right side of the geometry ( < 0 means left, > 0 means right, 0 indicates that the test was unsuccessful, e.g. for a point exactly on the line)
epsilon	epsilon for segment snapping

Returns: The squared Cartesian distance is also returned in sqrDist, negative number on error

Definition at line 751 of file qgsgeometry.cpp.

◆ closestVertex()

QgsPointXY QgsGeometry::closestVertex	(	const QgsPointXY &	point,
		int &	closestVertexIndex,
		int &	previousVertexIndex,
		int &	nextVertexIndex,
		double &	sqrDist
	)		const

Returns the vertex closest to the given point, the corresponding vertex index, squared distance snap point / target point and the indices of the vertices before and after the closest vertex.

Parameters

point	point to search for
closestVertexIndex	will be set to the vertex index of the closest found vertex
previousVertexIndex	will be set to the vertex index of the previous vertex from the closest one. Will be set to -1 if not present.
nextVertexIndex	will be set to the vertex index of the next vertex after the closest one. Will be set to -1 if not present.
sqrDist	will be set to the square distance between the closest vertex and the specified point

Returns: closest point in geometry. If not found (empty geometry), returns null point and sqrDist is negative.

Definition at line 397 of file qgsgeometry.cpp.

◆ closestVertexWithContext()

double QgsGeometry::closestVertexWithContext	(	const QgsPointXY &	point,
		int &	atVertex
	)		const

Searches for the closest vertex in this geometry to the given point.

Parameters

point	Specifiest the point for search
atVertex	Receives index of the closest vertex

Returns: The squared Cartesian distance is also returned in sqrDist, negative number on error

Definition at line 735 of file qgsgeometry.cpp.

◆ coerceToType()

QVector< QgsGeometry > QgsGeometry::coerceToType	(	QgsWkbTypes::Type	type,
		double	defaultZ = `0`,
		double	defaultM = `0`
	)		const

Attempts to coerce this geometry into the specified destination type.

This method will do anything possible to force the current geometry into the specified type. E.g.

lines or polygons will be converted to points by return either a single multipoint geometry or multiple single point geometries.
polygons will be converted to lines by extracting their exterior and interior rings, returning either a multilinestring or multiple single line strings as dictated by type.
lines will be converted to polygon rings if type is a polygon type
curved geometries will be segmented if type is non-curved.
multi geometries will be converted to a list of single geometries
single geometries will be upgraded to multi geometries
z or m values will be added or dropped as required.

Since QGIS 3.24, the parameters defaultZ and defaultM control the dimension value added when promoting geometries to Z, M or ZM versions. By default 0.0 is used for Z and M.

Note: This method is much stricter than convertToType(), as it considers the exact WKB type of geometries instead of the geometry family (point/line/polygon), and tries more exhaustively to coerce geometries to the desired type. It also correctly maintains curves and z/m values wherever appropriate.

Since: QGIS 3.14

Definition at line 1442 of file qgsgeometry.cpp.

◆ collectGeometry()

QgsGeometry QgsGeometry::collectGeometry ( const QVector< QgsGeometry > & geometries )

static

Creates a new multipart geometry from a list of QgsGeometry objects.

Definition at line 259 of file qgsgeometry.cpp.

◆ combine()

QgsGeometry QgsGeometry::combine ( const QgsGeometry & geometry ) const

Returns a geometry representing all the points in this geometry and other (a union geometry operation).

If the input is a NULL geometry, the output will also be a NULL geometry.

If an error was encountered while creating the result, more information can be retrieved by calling lastError() on the returned geometry.

Note: this operation is not called union since its a reserved word in C++.

Definition at line 2649 of file qgsgeometry.cpp.

◆ compare() [1/3]

bool QgsGeometry::compare	(	const QgsMultiPolygonXY &	p1,
		const QgsMultiPolygonXY &	p2,
		double	epsilon = `4 * std::numeric_limits<double>::epsilon()`
	)

static

Compares two multipolygons for equality within a specified tolerance.

Parameters

p1	first multipolygon
p2	second multipolygon
epsilon	maximum difference for coordinates between the multipolygons

Returns: true if multipolygons have the same number of polygons, the polygons have the same number of rings, and each ring has the same number of points and all points are equal within the specified tolerance

Since: QGIS 2.9

Definition at line 3482 of file qgsgeometry.cpp.

◆ compare() [2/3]

bool QgsGeometry::compare	(	const QgsPolygonXY &	p1,
		const QgsPolygonXY &	p2,
		double	epsilon = `4 * std::numeric_limits<double>::epsilon()`
	)

static

Compares two polygons for equality within a specified tolerance.

Parameters

p1	first polygon
p2	second polygon
epsilon	maximum difference for coordinates between the polygons

Returns: true if polygons have the same number of rings, and each ring has the same number of points and all points are equal within the specified tolerance

Since: QGIS 2.9

Definition at line 3468 of file qgsgeometry.cpp.

◆ compare() [3/3]

bool QgsGeometry::compare	(	const QgsPolylineXY &	p1,
		const QgsPolylineXY &	p2,
		double	epsilon = `4 * std::numeric_limits<double>::epsilon()`
	)

static

Compares two polylines for equality within a specified tolerance.

Parameters

p1	first polyline
p2	second polyline
epsilon	maximum difference for coordinates between the polylines

Returns: true if polylines have the same number of points and all points are equal within the specified tolerance

Since: QGIS 2.9

Definition at line 3455 of file qgsgeometry.cpp.

◆ const_parts_begin()

QgsAbstractGeometry::const_part_iterator QgsGeometry::const_parts_begin ( ) const

Returns STL-style const iterator pointing to the first part of the geometry.

This method avoids a detach and is more efficient then parts_begin() for read only iteration.

Since: QGIS 3.6

Definition at line 2030 of file qgsgeometry.cpp.

◆ const_parts_end()

QgsAbstractGeometry::const_part_iterator QgsGeometry::const_parts_end ( ) const

Returns STL-style iterator pointing to the imaginary part after the last part of the geometry.

This method avoids a detach and is more efficient then parts_end() for read only iteration.

Since: QGIS 3.6

Definition at line 2037 of file qgsgeometry.cpp.

◆ constGet()

const QgsAbstractGeometry * QgsGeometry::constGet ( ) const

Returns a non-modifiable (const) reference to the underlying abstract geometry primitive.

This is much faster then calling the non-const get() method.

Note: In QGIS 2.x this method was named geometry().

See also: set(); get()

Since: QGIS 3.0

Definition at line 136 of file qgsgeometry.cpp.

◆ constParts()

QgsGeometryConstPartIterator QgsGeometry::constParts ( ) const

Returns Java-style iterator for traversal of parts of the geometry.

This iterator returns read-only references to parts and cannot be used to modify the parts.

Unlike parts(), this method does not force a detach and is more efficient if read-only iteration only is required.

Example

# print the WKT representation of each part in a multi-point geometry
geometry = QgsGeometry.fromWkt( 'MultiPoint( 0 0, 1 1, 2 2)' )
for part in geometry.constParts():
    print(part.asWkt())
 
# single part geometries only have one part - this loop will iterate once only
geometry = QgsGeometry.fromWkt( 'LineString( 0 0, 10 10 )' )
for part in geometry.constParts():
    print(part.asWkt())
 
# part iteration can also be combined with vertex iteration
geometry = QgsGeometry.fromWkt( 'MultiPolygon((( 0 0, 0 10, 10 10, 10 0, 0 0 ),( 5 5, 5 6, 6 6, 6 5, 5 5)),((20 2, 22 2, 22 4, 20 4, 20 2)))' )
for part in geometry.constParts():
    for v in part.vertices():
        print(v.x(), v.y())

See also: parts(); vertices()

Since: QGIS 3.6

Definition at line 2053 of file qgsgeometry.cpp.

◆ contains() [1/2]

bool QgsGeometry::contains ( const QgsGeometry & geometry ) const

Returns true if the geometry completely contains another geometry.

Note: For performance critical code, or when testing for contains against many different geometries, consider using QgsGeometryEngine instead. This approach can be many orders of magnitude faster than calling contains() directly. See createGeometryEngine() for details on how to use the QgsGeometryEngine class.

Since: QGIS 1.5

Definition at line 1327 of file qgsgeometry.cpp.

◆ contains() [2/2]

bool QgsGeometry::contains ( const QgsPointXY * p ) const

Returns true if the geometry contains the point p.

Definition at line 1314 of file qgsgeometry.cpp.

◆ convertGeometryCollectionToSubclass()

bool QgsGeometry::convertGeometryCollectionToSubclass ( QgsWkbTypes::GeometryType geomType )

Converts geometry collection to a the desired geometry type subclass (multi-point, multi-linestring or multi-polygon).

Child geometries of different type are filtered out. Does nothing the geometry is not a geometry collection. May leave the geometry empty if none of the child geometries match the desired type.

Returns: true in case of success and false else

Since: QGIS 3.2

Definition at line 1636 of file qgsgeometry.cpp.

◆ convertPointList() [1/2]

void QgsGeometry::convertPointList	(	const QgsPointSequence &	input,
		QVector< QgsPointXY > &	output
	)

static

Downgrades a point list from QgsPoint to QgsPointXY.

Parameters

input	list of QgsPoint objects to be downgraded
output	destination for list of points converted to QgsPointXY

Definition at line 3353 of file qgsgeometry.cpp.

◆ convertPointList() [2/2]

void QgsGeometry::convertPointList	(	const QVector< QgsPointXY > &	input,
		QgsPointSequence &	output
	)

static

Upgrades a point list from QgsPointXY to QgsPoint.

Parameters

input	list of QgsPointXY objects to be upgraded
output	destination for list of points converted to QgsPoint

Definition at line 3344 of file qgsgeometry.cpp.

◆ convertToCurves()

QgsGeometry QgsGeometry::convertToCurves	(	double	distanceTolerance = `1e-8`,
		double	angleTolerance = `1e-8`
	)		const

Attempts to convert a non-curved geometry into a curved geometry type (e.g.

LineString to CompoundCurve, Polygon to CurvePolygon).

The distanceTolerance specifies the maximum deviation allowed between the original location of vertices and where they would fall on the candidate curved geometry.

This method only consider a segments as suitable for replacing with an arc if the points are all regularly spaced on the candidate arc. The pointSpacingAngleTolerance parameter specifies the maximum angular deviation (in radians) allowed when testing for regular point spacing.

Note: The API is considered EXPERIMENTAL and can be changed without a notice

Since: QGIS 3.14

Definition at line 2288 of file qgsgeometry.cpp.

◆ convertToMultiType()

bool QgsGeometry::convertToMultiType ( )

Converts single type geometry into multitype geometry e.g.

a polygon into a multipolygon geometry with one polygon If it is already a multipart geometry, it will return true and not change the geometry.

Returns: true in case of success and false else

Definition at line 1582 of file qgsgeometry.cpp.

◆ convertToSingleType()

bool QgsGeometry::convertToSingleType ( )

Converts multi type geometry into single type geometry e.g.

a multipolygon into a polygon geometry. Only the first part of the multi geometry will be retained. If it is already a single part geometry, it will return true and not change the geometry.

Returns: true in case of success and false else

Definition at line 1614 of file qgsgeometry.cpp.

◆ convertToStraightSegment()

void QgsGeometry::convertToStraightSegment	(	double	tolerance = `M_PI / 180.`,
		QgsAbstractGeometry::SegmentationToleranceType	toleranceType = `QgsAbstractGeometry::MaximumAngle`
	)

Converts the geometry to straight line segments, if it is a curved geometry type.

Parameters

tolerance	segmentation tolerance
toleranceType	maximum segmentation angle or maximum difference between approximation and curve

See also: requiresConversionToStraightSegments

Since: QGIS 2.10

Definition at line 3118 of file qgsgeometry.cpp.

◆ convertToType()

QgsGeometry QgsGeometry::convertToType	(	QgsWkbTypes::GeometryType	destType,
		bool	destMultipart = `false`
	)		const

Try to convert the geometry to the requested type.

Parameters

destType	the geometry type to be converted to
destMultipart	determines if the output geometry will be multipart or not

Returns: the converted geometry or nullptr if the conversion fails.

Note: The coerceToType() method applies much stricter and more exhaustive attempts to convert between geometry types, and is recommended instead of this method. This method force drops curves and any z or m values present in the geometry.

Since: QGIS 2.2

Definition at line 1564 of file qgsgeometry.cpp.

◆ convexHull()

QgsGeometry QgsGeometry::convexHull ( ) const

Returns the smallest convex polygon that contains all the points in the geometry.

If the input is a NULL geometry, the output will also be a NULL geometry.

If an error was encountered while creating the result, more information can be retrieved by calling lastError() on the returned geometry.

Definition at line 2399 of file qgsgeometry.cpp.

◆ createGeometryEngine()

QgsGeometryEngine * QgsGeometry::createGeometryEngine ( const QgsAbstractGeometry * geometry )

static

Creates and returns a new geometry engine representing the specified geometry.

A geometry engine is a low-level representation of a QgsAbstractGeometry object, optimised for use with external geometry libraries such as GEOS.

QgsGeometryEngine objects provide a mechanism for optimized evaluation of geometric algorithms, including spatial relationships between geometries and operations such as buffers or clipping. QgsGeometryEngine is recommended for use in any performance critical code instead of directly using the equivalent QgsGeometry methods such as QgsGeometry::intersects().

Many methods available in the QgsGeometryEngine class can benefit from pre-preparing geometries. For instance, whenever a large number of spatial relationships will be tested (such as calling intersects(), within(), etc) then the geometry should first be prepared by calling prepareGeometry() before performing the tests.

Example

# polygon_geometry contains a complex polygon, with many vertices
polygon_geometry = QgsGeometry.fromWkt('Polygon((...))')
 
# create a QgsGeometryEngine representation of the polygon
polygon_geometry_engine = QgsGeometry.createGeometryEngine(polygon_geometry.constGet())
 
# since we'll be performing many intersects tests, we can speed up these tests considerably
# by first "preparing" the geometry engine
polygon_geometry_engine.prepareGeometry()
 
# now we are ready to quickly test intersection against many other objects
for feature in my_layer.getFeatures():
    feature_geometry = feature.geometry()
    # test whether the feature's geometry intersects our original complex polygon
    if polygon_geometry_engine.intersects(feature_geometry.constGet()):
        print('feature intersects the polygon!')

QgsGeometryEngine operations are backed by the GEOS library (https://trac.osgeo.org/geos/).

Definition at line 3983 of file qgsgeometry.cpp.

◆ createPolygonFromQPolygonF()

QgsPolygonXY QgsGeometry::createPolygonFromQPolygonF ( const QPolygonF & polygon )

static

Creates a QgsPolygonXYfrom a QPolygonF.

Parameters

polygon source polygon

Returns: QgsPolygon

See also: createPolylineFromQPolygonF

Deprecated:: use QgsGeometry::fromQPolygonF() or QgsLineString::fromQPolygonF() instead.

Definition at line 3435 of file qgsgeometry.cpp.

◆ createPolylineFromQPolygonF()

QgsPolylineXY QgsGeometry::createPolylineFromQPolygonF ( const QPolygonF & polygon )

static

Creates a QgsPolylineXY from a QPolygonF.

Parameters

polygon source polygon

Returns: QgsPolylineXY

See also: createPolygonFromQPolygonF

Deprecated:: use QgsGeometry::fromQPolygonF() or QgsLineString::fromQPolygonF() instead.

Definition at line 3444 of file qgsgeometry.cpp.

◆ createWedgeBuffer()

QgsGeometry QgsGeometry::createWedgeBuffer	(	const QgsPoint &	center,
		double	azimuth,
		double	angularWidth,
		double	outerRadius,
		double	innerRadius = `0`
	)

static

Creates a wedge shaped buffer from a center point.

The azimuth gives the angle (in degrees) for the middle of the wedge to point. The buffer width (in degrees) is specified by the angularWidth parameter. Note that the wedge will extend to half of the angularWidth either side of the azimuth direction.

The outer radius of the buffer is specified via outerRadius, and optionally an innerRadius can also be specified.

The returned geometry will be a CurvePolygon geometry containing circular strings. It may need to be segmentized to convert to a standard Polygon geometry.

Since: QGIS 3.2

Definition at line 288 of file qgsgeometry.cpp.

◆ crosses()

bool QgsGeometry::crosses ( const QgsGeometry & geometry ) const

Returns true if the geometry crosses another geometry.

Note: For performance critical code, or when testing for crosses against many different geometries, consider using QgsGeometryEngine instead. This approach can be many orders of magnitude faster than calling crosses() directly. See createGeometryEngine() for details on how to use the QgsGeometryEngine class.

Since: QGIS 1.5

Definition at line 1406 of file qgsgeometry.cpp.

◆ delaunayTriangulation()

QgsGeometry QgsGeometry::delaunayTriangulation	(	double	tolerance = `0.0`,
		bool	edgesOnly = `false`
	)		const

Returns the Delaunay triangulation for the vertices of the geometry.

The tolerance parameter specifies an optional snapping tolerance which can be used to improve the robustness of the triangulation. If edgesOnly is true than line string boundary geometries will be returned instead of polygons. An empty geometry will be returned if the diagram could not be calculated.

Since: QGIS 3.0

Definition at line 2431 of file qgsgeometry.cpp.

◆ deletePart()

bool QgsGeometry::deletePart ( int partNum )

Deletes part identified by the part number.

Returns: true on success

Since: QGIS 1.2

Definition at line 2828 of file qgsgeometry.cpp.

◆ deleteRing()

bool QgsGeometry::deleteRing	(	int	ringNum,
		int	partNum = `0`
	)

Deletes a ring in polygon or multipolygon.

Ring 0 is outer ring and can't be deleted.

Returns: true on success

Since: QGIS 1.2

Definition at line 2816 of file qgsgeometry.cpp.

◆ deleteVertex()

bool QgsGeometry::deleteVertex ( int atVertex )

Deletes the vertex at the given position number and item (first number is index 0)

Returns: false if atVertex does not correspond to a valid vertex on this geometry (including if this geometry is a Point), or if the number of remaining vertices in the linestring would be less than two. It is up to the caller to distinguish between these error conditions. (Or maybe we add another method to this object to help make the distinction?)

Definition at line 514 of file qgsgeometry.cpp.

◆ densifyByCount()

QgsGeometry QgsGeometry::densifyByCount ( int extraNodesPerSegment ) const

Returns a copy of the geometry which has been densified by adding the specified number of extra nodes within each segment of the geometry.

If the geometry has z or m values present then these will be linearly interpolated at the added nodes. Curved geometry types are automatically segmentized by this routine.

See also: densifyByDistance()

Since: QGIS 3.0

Definition at line 2274 of file qgsgeometry.cpp.

◆ densifyByDistance()

QgsGeometry QgsGeometry::densifyByDistance ( double distance ) const

Densifies the geometry by adding regularly placed extra nodes inside each segment so that the maximum distance between any two nodes does not exceed the specified distance.

E.g. specifying a distance 3 would cause the segment [0 0] -> [10 0] to be converted to [0 0] -> [2.5 0] -> [5 0] -> [7.5 0] -> [10 0], since 3 extra nodes are required on the segment and spacing these at 2.5 increments allows them to be evenly spaced over the segment. If the geometry has z or m values present then these will be linearly interpolated at the added nodes. Curved geometry types are automatically segmentized by this routine.

See also: densifyByCount()

Since: QGIS 3.0

Definition at line 2281 of file qgsgeometry.cpp.

◆ difference()

QgsGeometry QgsGeometry::difference ( const QgsGeometry & geometry ) const

Returns a geometry representing the points making up this geometry that do not make up other.

If the input is a NULL geometry, the output will also be a NULL geometry.

If an error was encountered while creating the result, more information can be retrieved by calling lastError() on the returned geometry.

Definition at line 2688 of file qgsgeometry.cpp.

◆ disjoint()

bool QgsGeometry::disjoint ( const QgsGeometry & geometry ) const

Returns true if the geometry is disjoint of another geometry.

Note: For performance critical code, or when testing for disjoint against many different geometries, consider using QgsGeometryEngine instead. This approach can be many orders of magnitude faster than calling disjoint() directly. See createGeometryEngine() for details on how to use the QgsGeometryEngine class.

Since: QGIS 1.5

Definition at line 1339 of file qgsgeometry.cpp.

◆ distance()

double QgsGeometry::distance ( const QgsGeometry & geom ) const

Returns the minimum distance between this geometry and another geometry.

Will return a negative value if either geometry is empty or null.

Warning: QgsGeometry objects are inherently Cartesian/planar geometries, and the distance returned by this method is calculated using strictly Cartesian mathematics.

Definition at line 1926 of file qgsgeometry.cpp.

◆ distanceToVertex()

double QgsGeometry::distanceToVertex ( int vertex ) const

Returns the distance along this geometry from its first vertex to the specified vertex.

Parameters

vertex vertex index to calculate distance to

Returns: distance to vertex (following geometry), or -1 for invalid vertex numbers

Warning: QgsGeometry objects are inherently Cartesian/planar geometries, and the distance returned by this method is calculated using strictly Cartesian mathematics.

Since: QGIS 2.16

Definition at line 425 of file qgsgeometry.cpp.

◆ draw()

void QgsGeometry::draw ( QPainter & p ) const

Draws the geometry onto a QPainter.

Parameters

p	destination QPainter

Since: QGIS 2.10

Definition at line 3191 of file qgsgeometry.cpp.

◆ equals()

bool QgsGeometry::equals ( const QgsGeometry & geometry ) const

Test if this geometry is exactly equal to another geometry.

This is a strict equality check, where the underlying geometries must have exactly the same type, component vertices and vertex order.

Calling this method is dramatically faster than the topological equality test performed by isGeosEqual().

Note: Comparing two null geometries will return false.

See also: isGeosEqual()

Since: QGIS 1.5

Definition at line 1351 of file qgsgeometry.cpp.

◆ extendLine()

QgsGeometry QgsGeometry::extendLine	(	double	startDistance,
		double	endDistance
	)		const

Extends a (multi)line geometry by extrapolating out the start or end of the line by a specified distance.

Lines are extended using the bearing of the first or last segment in the line.

Since: QGIS 3.0

Definition at line 2215 of file qgsgeometry.cpp.

◆ extrude()

QgsGeometry QgsGeometry::extrude	(	double	x,
		double	y
	)

Returns an extruded version of this geometry.

Definition at line 2728 of file qgsgeometry.cpp.

◆ filterVertices()

void QgsGeometry::filterVertices ( const std::function< bool(const QgsPoint &) > & filter )

Filters the vertices from the geometry in place, removing any which do not return true for the filter function check.

Has no effect when called on a single point geometry.

Depending on the filter used, this may result in an invalid geometry.

Note: Not available in Python bindings

Since: QGIS 3.2

Definition at line 3324 of file qgsgeometry.cpp.

◆ forcePolygonClockwise()

QgsGeometry QgsGeometry::forcePolygonClockwise ( ) const

Forces geometries to respect the exterior ring is clockwise, interior rings are counter-clockwise convention.

This convention is used primarily by ESRI software.

See also: forcePolygonCounterClockwise()

Since: QGIS 3.24

Definition at line 2894 of file qgsgeometry.cpp.

◆ forcePolygonCounterClockwise()

QgsGeometry QgsGeometry::forcePolygonCounterClockwise ( ) const

Forces geometries to respect the exterior ring is counter-clockwise, interior rings are clockwise convention.

This convention matches the OGC Simple Features specification.

See also: forcePolygonClockwise()

Since: QGIS 3.24

Definition at line 2936 of file qgsgeometry.cpp.

◆ forceRHR()

QgsGeometry QgsGeometry::forceRHR ( ) const

Forces geometries to respect the Right-Hand-Rule, in which the area that is bounded by a polygon is to the right of the boundary.

In particular, the exterior ring is oriented in a clockwise direction and the interior rings in a counter-clockwise direction.

Warning: Due to the conflicting definitions of the right-hand-rule in general use, it is recommended to use the explicit forcePolygonClockwise() or forcePolygonCounterClockwise() methods instead.

See also: forcePolygonClockwise(); forcePolygonCounterClockwise()

Since: QGIS 3.6

Definition at line 2889 of file qgsgeometry.cpp.

◆ frechetDistance()

double QgsGeometry::frechetDistance ( const QgsGeometry & geom ) const

Returns the Fréchet distance between this geometry and geom, restricted to discrete points for both geometries.

The Fréchet distance is a measure of similarity between curves that takes into account the location and ordering of the points along the curves. Therefore it is often better than the Hausdorff distance.

In case of error -1 will be returned.

This method requires a QGIS build based on GEOS 3.7 or later.

Exceptions

QgsNotSupportedException on QGIS builds based on GEOS 3.6 or earlier.

See also: frechetDistanceDensify()

Since: QGIS 3.20

Definition at line 1969 of file qgsgeometry.cpp.

◆ frechetDistanceDensify()

double QgsGeometry::frechetDistanceDensify	(	const QgsGeometry &	geom,
		double	densifyFraction
	)		const

Returns the Fréchet distance between this geometry and geom, restricted to discrete points for both geometries.

The Fréchet distance is a measure of similarity between curves that takes into account the location and ordering of the points along the curves. Therefore it is often better than the Hausdorff distance.

This function accepts a densifyFraction argument. The function performs a segment densification before computing the discrete Fréchet distance. The densifyFraction parameter sets the fraction by which to densify each segment. Each segment will be split into a number of equal-length subsegments, whose fraction of the total length is closest to the given fraction.

This method can be used when the default approximation provided by frechetDistance() is not sufficient. Decreasing the densifyFraction parameter will make the distance returned approach the true Fréchet distance for the geometries.

This method requires a QGIS build based on GEOS 3.7 or later.

Exceptions

QgsNotSupportedException on QGIS builds based on GEOS 3.6 or earlier.

See also: frechetDistance()

Since: QGIS 3.20

Definition at line 1981 of file qgsgeometry.cpp.

◆ fromMultiPointXY()

QgsGeometry QgsGeometry::fromMultiPointXY ( const QgsMultiPointXY & multipoint )

static

Creates a new geometry from a QgsMultiPointXY object.

Definition at line 211 of file qgsgeometry.cpp.

◆ fromMultiPolygonXY()

QgsGeometry QgsGeometry::fromMultiPolygonXY ( const QgsMultiPolygonXY & multipoly )

static

Creates a new geometry from a QgsMultiPolygonXY.

Definition at line 231 of file qgsgeometry.cpp.

◆ fromMultiPolylineXY()

QgsGeometry QgsGeometry::fromMultiPolylineXY ( const QgsMultiPolylineXY & multiline )

static

Creates a new geometry from a QgsMultiPolylineXY object.

Definition at line 221 of file qgsgeometry.cpp.

◆ fromPointXY()

QgsGeometry QgsGeometry::fromPointXY ( const QgsPointXY & point )

static

Creates a new geometry from a QgsPointXY object.

Definition at line 176 of file qgsgeometry.cpp.

◆ fromPolygonXY()

QgsGeometry QgsGeometry::fromPolygonXY ( const QgsPolygonXY & polygon )

static

Creates a new geometry from a QgsPolygonXY.

Definition at line 201 of file qgsgeometry.cpp.

◆ fromPolyline()

QgsGeometry QgsGeometry::fromPolyline ( const QgsPolyline & polyline )

static

Creates a new LineString geometry from a list of QgsPoint points.

This method will respect any Z or M dimensions present in the input points. E.g. if input points are PointZ type, the resultant linestring will be a LineStringZ type.

Since: QGIS 3.0

Definition at line 196 of file qgsgeometry.cpp.

◆ fromPolylineXY()

QgsGeometry QgsGeometry::fromPolylineXY ( const QgsPolylineXY & polyline )

static

Creates a new LineString geometry from a list of QgsPointXY points.

Using fromPolyline() is preferred, as fromPolyline() is more efficient and will respect any Z or M dimensions present in the input points.

Note: In QGIS 2.x this method was available as fromPolyline().

See also: fromPolyline()

Since: QGIS 3.0

Definition at line 186 of file qgsgeometry.cpp.

◆ fromQPointF()

QgsGeometry QgsGeometry::fromQPointF ( QPointF point )

static

Construct geometry from a QPointF.

Parameters

point source QPointF

Since: QGIS 2.7

Definition at line 3414 of file qgsgeometry.cpp.

◆ fromQPolygonF()

QgsGeometry QgsGeometry::fromQPolygonF ( const QPolygonF & polygon )

static

Construct geometry from a QPolygonF.

If the polygon is closed than the resultant geometry will be a polygon, if it is open than the geometry will be a polyline.

Parameters

polygon source QPolygonF

Since: QGIS 2.7

Definition at line 3419 of file qgsgeometry.cpp.

◆ fromRect()

QgsGeometry QgsGeometry::fromRect ( const QgsRectangle & rect )

static

Creates a new geometry from a QgsRectangle.

Definition at line 241 of file qgsgeometry.cpp.

◆ fromWkb() [1/2]

void QgsGeometry::fromWkb ( const QByteArray & wkb )

Set the geometry, feeding in the buffer containing OGC Well-Known Binary.

Since: QGIS 3.0

Definition at line 351 of file qgsgeometry.cpp.

◆ fromWkb() [2/2]

void QgsGeometry::fromWkb	(	unsigned char *	wkb,
		int	length
	)

Set the geometry, feeding in the buffer containing OGC Well-Known Binary and the buffer's length.

This class will take ownership of the buffer.

Note: not available in Python bindings

Definition at line 344 of file qgsgeometry.cpp.

◆ fromWkt()

static QgsGeometry QgsGeometry::fromWkt ( const QString & wkt )

static

Creates a new geometry from a WKT string.

◆ get()

QgsAbstractGeometry * QgsGeometry::get ( )

Returns a modifiable (non-const) reference to the underlying abstract geometry primitive.

This method can be slow to call, as it may trigger a detachment of the geometry and a deep copy. Where possible, use constGet() instead.

Note: In QGIS 2.x this method was named geometry().

See also: constGet(); set()

Since: QGIS 3.0

Definition at line 141 of file qgsgeometry.cpp.

◆ hausdorffDistance()

double QgsGeometry::hausdorffDistance ( const QgsGeometry & geom ) const

Returns the Hausdorff distance between this geometry and geom.

This is basically a measure of how similar or dissimilar 2 geometries are.

This algorithm is an approximation to the standard Hausdorff distance. This approximation is exact or close enough for a large subset of useful cases. Examples of these are:

computing distance between Linestrings that are roughly parallel to each other, and roughly equal in length. This occurs in matching linear networks.
Testing similarity of geometries.

If the default approximate provided by this method is insufficient, use hausdorffDistanceDensify() instead.

In case of error -1 will be returned.

See also: hausdorffDistanceDensify()

Since: QGIS 3.0

Definition at line 1944 of file qgsgeometry.cpp.

◆ hausdorffDistanceDensify()

double QgsGeometry::hausdorffDistanceDensify	(	const QgsGeometry &	geom,
		double	densifyFraction
	)		const

Returns the Hausdorff distance between this geometry and geom.

This is basically a measure of how similar or dissimilar 2 geometries are.

This function accepts a densifyFraction argument. The function performs a segment densification before computing the discrete Hausdorff distance. The densifyFraction parameter sets the fraction by which to densify each segment. Each segment will be split into a number of equal-length subsegments, whose fraction of the total length is closest to the given fraction.

This method can be used when the default approximation provided by hausdorffDistance() is not sufficient. Decreasing the densifyFraction parameter will make the distance returned approach the true Hausdorff distance for the geometries.

In case of error -1 will be returned.

See also: hausdorffDistance()

Since: QGIS 3.0

Definition at line 1956 of file qgsgeometry.cpp.

◆ insertVertex() [1/2]

bool QgsGeometry::insertVertex	(	const QgsPoint &	point,
		int	beforeVertex
	)

Insert a new vertex before the given vertex index, ring and item (first number is index 0) If the requested vertex number (beforeVertex.back()) is greater than the last actual vertex on the requested ring and item, it is assumed that the vertex is to be appended instead of inserted.

Returns false if atVertex does not correspond to a valid vertex on this geometry (including if this geometry is a Point). It is up to the caller to distinguish between these error conditions. (Or maybe we add another method to this object to help make the distinction?)

Definition at line 657 of file qgsgeometry.cpp.

◆ insertVertex() [2/2]

bool QgsGeometry::insertVertex	(	double	x,
		double	y,
		int	beforeVertex
	)

Insert a new vertex before the given vertex index, ring and item (first number is index 0) If the requested vertex number (beforeVertex.back()) is greater than the last actual vertex on the requested ring and item, it is assumed that the vertex is to be appended instead of inserted.

Returns false if atVertex does not correspond to a valid vertex on this geometry (including if this geometry is a Point). It is up to the caller to distinguish between these error conditions. (Or maybe we add another method to this object to help make the distinction?)

Definition at line 631 of file qgsgeometry.cpp.

◆ interpolate()

QgsGeometry QgsGeometry::interpolate ( double distance ) const

Returns an interpolated point on the geometry at the specified distance.

If the original geometry is a polygon type, the boundary of the polygon will be used during interpolation. If the original geometry is a point type, a null geometry will be returned.

If z or m values are present, the output z and m will be interpolated using the existing vertices' z or m values.

If the input is a NULL geometry, the output will also be a NULL geometry.

See also: lineLocatePoint()

Since: QGIS 2.0

Definition at line 2500 of file qgsgeometry.cpp.

◆ interpolateAngle()

double QgsGeometry::interpolateAngle ( double distance ) const

Returns the angle parallel to the linestring or polygon boundary at the specified distance along the geometry.

Angles are in radians, clockwise from north. If the distance coincides precisely at a node then the average angle from the segment either side of the node is returned.

Parameters

distance distance along geometry

See also: angleAtVertex()

Since: QGIS 3.0

Definition at line 2569 of file qgsgeometry.cpp.

◆ intersection()

QgsGeometry QgsGeometry::intersection ( const QgsGeometry & geometry ) const

Returns a geometry representing the points shared by this geometry and other.

If the input is a NULL geometry, the output will also be a NULL geometry.

If an error was encountered while creating the result, more information can be retrieved by calling lastError() on the returned geometry.

Definition at line 2627 of file qgsgeometry.cpp.

◆ intersects() [1/2]

bool QgsGeometry::intersects ( const QgsGeometry & geometry ) const

Returns true if this geometry exactly intersects with another geometry.

This test is exact and can be slow for complex geometries.

The GEOS library is used to perform the intersection test. Geometries which are not valid may return incorrect results.

Note: For performance critical code, or when testing for intersection against many different geometries, consider using QgsGeometryEngine instead. This approach can be many orders of magnitude faster than calling intersects() directly. See createGeometryEngine() for details on how to use the QgsGeometryEngine class.

See also: boundingBoxIntersects()

Definition at line 1282 of file qgsgeometry.cpp.

◆ intersects() [2/2]

bool QgsGeometry::intersects ( const QgsRectangle & rectangle ) const

Returns true if this geometry exactly intersects with a rectangle.

This test is exact and can be slow for complex geometries.

The GEOS library is used to perform the intersection test. Geometries which are not valid may return incorrect results.

See also: boundingBoxIntersects()

Definition at line 1266 of file qgsgeometry.cpp.

◆ isAxisParallelRectangle()

bool QgsGeometry::isAxisParallelRectangle	(	double	maximumDeviation,
		bool	simpleRectanglesOnly = `false`
	)		const

Returns true if the geometry is a polygon that is almost an axis-parallel rectangle.

The maximumDeviation argument specifes the maximum angle (in degrees) that the polygon edges are allowed to deviate from axis parallel lines.

By default the check will permit polygons with more than 4 edges, so long as the overall shape of the polygon is an axis-parallel rectangle (i.e. it is tolerant to rectangles with additional vertices added along the rectangle sides). If simpleRectanglesOnly is set to true then the method will only return true if the geometry is a simple rectangle consisting of 4 edges.

Since: QGIS 3.20

Definition at line 3050 of file qgsgeometry.cpp.

◆ isEmpty()

bool QgsGeometry::isEmpty ( ) const

Returns true if the geometry is empty (eg a linestring with no vertices, or a collection with no geometries).

A null geometry will always return true for isEmpty().

See also: isNull()

Definition at line 379 of file qgsgeometry.cpp.

◆ isGeosEqual()

bool QgsGeometry::isGeosEqual ( const QgsGeometry & g ) const

Compares the geometry with another geometry using GEOS.

This method performs a slow, topological check, where geometries are considered equal if all of the their component edges overlap. E.g. lines with the same vertex locations but opposite direction will be considered equal by this method.

Consider using the much faster, stricter equality test performed by equals() instead.

Note: Comparing two null geometries will return false.

See also: equals()

Since: QGIS 1.5

Definition at line 3059 of file qgsgeometry.cpp.

◆ isGeosValid()

bool QgsGeometry::isGeosValid ( Qgis::GeometryValidityFlags flags = Qgis::GeometryValidityFlags() ) const

Checks validity of the geometry using GEOS.

The flags parameter indicates optional flags which control the type of validity checking performed.

Since: QGIS 1.5

Definition at line 3030 of file qgsgeometry.cpp.

◆ isMultipart()

bool QgsGeometry::isMultipart ( ) const

Returns true if WKB of the geometry is of WKBMulti* type.

Definition at line 389 of file qgsgeometry.cpp.

◆ isNull()

bool QgsGeometry::isNull ( ) const

Returns true if the geometry is null (ie, contains no underlying geometry accessible via geometry() ).

See also: get; isEmpty()

Since: QGIS 2.10

Definition at line 157 of file qgsgeometry.cpp.

◆ isSimple()

bool QgsGeometry::isSimple ( ) const

Determines whether the geometry is simple (according to OGC definition), i.e.

it has no anomalous geometric points, such as self-intersection or self-tangency. Uses GEOS library for the test.

Note: This is useful mainly for linestrings and linear rings. Polygons are simple by definition, for checking anomalies in polygon geometries one can use isGeosValid().

Since: QGIS 3.0

Definition at line 3040 of file qgsgeometry.cpp.

◆ largestEmptyCircle()

QgsGeometry QgsGeometry::largestEmptyCircle	(	double	tolerance,
		const QgsGeometry &	boundary = `QgsGeometry()`
	)		const

Constructs the Largest Empty Circle for a set of obstacle geometries, up to a specified tolerance.

The Largest Empty Circle is the largest circle which has its center in the convex hull of the obstacles (the boundary), and whose interior does not intersect with any obstacle. The circle center is the point in the interior of the boundary which has the farthest distance from the obstacles (up to tolerance). The circle is determined by the center point and a point lying on an obstacle indicating the circle radius. The implementation uses a successive-approximation technique over a grid of square cells covering the obstacles and boundary. The grid is refined using a branch-and-bound algorithm. Point containment and distance are computed in a performant way by using spatial indexes. Returns a two-point linestring, with one point at the center of the inscribed circle and the other on the boundary of the inscribed circle.

This method requires QGIS builds based on GEOS 3.9 or later.

Warning: the tolerance value must be a value greater than 0, or the algorithm may never converge on a solution

Exceptions

QgsNotSupportedException on QGIS builds based on GEOS 3.8 or earlier.

Since: QGIS 3.20

Definition at line 2341 of file qgsgeometry.cpp.

◆ lastError()

QString QgsGeometry::lastError ( ) const

Returns an error string referring to the last error encountered either when this geometry was created or when an operation was performed on the geometry.

Since: QGIS 3.0

Definition at line 3319 of file qgsgeometry.cpp.

◆ length()

double QgsGeometry::length ( ) const

Returns the planar, 2-dimensional length of geometry.

If the geometry is a polygon geometry then the perimeter of the polygon will be returned.

Warning: QgsGeometry objects are inherently Cartesian/planar geometries, and the length returned by this method is calculated using strictly Cartesian mathematics. In contrast, the QgsDistanceArea class exposes methods for calculating the lengths of geometries using geodesic calculations which account for the curvature of the Earth (or any other celestial body).

See also: area()

Since: QGIS 1.5

Definition at line 1901 of file qgsgeometry.cpp.

◆ lineLocatePoint()

double QgsGeometry::lineLocatePoint ( const QgsGeometry & point ) const

Returns a distance representing the location along this linestring of the closest point on this linestring geometry to the specified point.

Ie, the returned value indicates how far along this linestring you need to traverse to get to the closest location where this linestring comes to the specified point.

Parameters

point point to seek proximity to

Returns: distance along line, or -1 on error

Note: only valid for linestring geometries

See also: interpolate()

Since: QGIS 3.0

Definition at line 2550 of file qgsgeometry.cpp.

◆ makeDifference()

QgsGeometry QgsGeometry::makeDifference ( const QgsGeometry & other ) const

Returns the geometry formed by modifying this geometry such that it does not intersect the other geometry.

Parameters

other geometry that should not be intersect

Returns: difference geometry, or empty geometry if difference could not be calculated

Since: QGIS 3.0

Definition at line 1070 of file qgsgeometry.cpp.

◆ makeDifferenceInPlace()

int QgsGeometry::makeDifferenceInPlace ( const QgsGeometry & other )

Changes this geometry such that it does not intersect the other geometry.

Parameters

other geometry that should not be intersect

Note: Not available in Python

Definition at line 1050 of file qgsgeometry.cpp.

◆ makeValid()

QgsGeometry QgsGeometry::makeValid ( ) const

Attempts to make an invalid geometry valid without losing vertices.

Already-valid geometries are returned without further intervention. In case of full or partial dimensional collapses, the output geometry may be a collection of lower-to-equal dimension geometries or a geometry of lower dimension. Single polygons may become multi-geometries in case of self-intersections. It preserves Z values, but M values will be dropped.

If an error was encountered during the process, more information can be retrieved by calling lastError() on the returned geometry.

Returns: new valid QgsGeometry or null geometry on error

Note: For QGIS builds using GEOS library versions older than 3.8 this method calls an internal fork of PostGIS' ST_MakeValid() function. For builds based on GEOS 3.8 or later this method calls the GEOS MakeValid method directly.

Since: QGIS 3.0

Definition at line 2871 of file qgsgeometry.cpp.

◆ mapToPixel()

void QgsGeometry::mapToPixel ( const QgsMapToPixel & mtp )

Transforms the geometry from map units to pixels in place.

Parameters

mtp	map to pixel transform

Since: QGIS 2.10

Definition at line 3163 of file qgsgeometry.cpp.

◆ mergeLines()

QgsGeometry QgsGeometry::mergeLines ( ) const

Merges any connected lines in a LineString/MultiLineString geometry and converts them to single line strings.

Returns: a LineString or MultiLineString geometry, with any connected lines joined. An empty geometry will be returned if the input geometry was not a MultiLineString geometry.

Since: QGIS 3.0

Definition at line 2668 of file qgsgeometry.cpp.

◆ minimalEnclosingCircle() [1/2]

QgsGeometry QgsGeometry::minimalEnclosingCircle	(	QgsPointXY &	center,
		double &	radius,
		unsigned int	segments = `36`
	)		const

Returns the minimal enclosing circle for the geometry.

Parameters

center	Center of the minimal enclosing circle returneds
radius	Radius of the minimal enclosing circle returned
segments	Number of segments used to segment geometry.

See also: QgsEllipse::toPolygon()

Returns: the minimal enclosing circle as a QGIS geometry

Since: QGIS 3.0

Definition at line 1164 of file qgsgeometry.cpp.

◆ minimalEnclosingCircle() [2/2]

QgsGeometry QgsGeometry::minimalEnclosingCircle ( unsigned int segments = 36 ) const

Returns the minimal enclosing circle for the geometry.

Parameters

segments Number of segments used to segment geometry.

See also: QgsEllipse::toPolygon()

Since: QGIS 3.0

Definition at line 1191 of file qgsgeometry.cpp.

◆ minimumClearance()

double QgsGeometry::minimumClearance ( ) const

Computes the minimum clearance of a geometry.

The minimum clearance is the smallest amount by which a vertex could be moved to produce an invalid polygon, a non-simple linestring, or a multipoint with repeated points. If a geometry has a minimum clearance of 'eps', it can be said that:

No two distinct vertices in the geometry are separated by less than 'eps'
No vertex is closer than 'eps' to a line segment of which it is not an endpoint.

If the minimum clearance cannot be defined for a geometry (such as with a single point, or a multipoint whose points are identical) a value of infinity will be returned.

If an error occurs while calculating the clearance NaN will be returned.

This method requires a QGIS build based on GEOS 3.6 or later.

Exceptions

QgsNotSupportedException on QGIS builds based on GEOS 3.5 or earlier.

Since: QGIS 3.20

Definition at line 2371 of file qgsgeometry.cpp.

◆ minimumClearanceLine()

QgsGeometry QgsGeometry::minimumClearanceLine ( ) const

Returns a LineString whose endpoints define the minimum clearance of a geometry.

If the geometry has no minimum clearance, an empty LineString will be returned.

This method requires a QGIS build based on GEOS 3.6 or later.

Exceptions

QgsNotSupportedException on QGIS builds based on GEOS 3.5 or earlier.

Since: QGIS 3.20

Definition at line 2384 of file qgsgeometry.cpp.

◆ minimumWidth()

QgsGeometry QgsGeometry::minimumWidth ( ) const

Returns a linestring geometry which represents the minimum diameter of the geometry.

The minimum diameter is defined to be the width of the smallest band that contains the geometry, where a band is a strip of the plane defined by two parallel lines. This can be thought of as the smallest hole that the geometry can be moved through, with a single rotation.

This method requires a QGIS build based on GEOS 3.6 or later.

Exceptions

QgsNotSupportedException on QGIS builds based on GEOS 3.5 or earlier.

Since: QGIS 3.20

Definition at line 2356 of file qgsgeometry.cpp.

◆ moveVertex() [1/2]

bool QgsGeometry::moveVertex	(	const QgsPoint &	p,
		int	atVertex
	)

Moves the vertex at the given position number and item (first number is index 0) to the given coordinates.

Returns false if atVertex does not correspond to a valid vertex on this geometry

Definition at line 496 of file qgsgeometry.cpp.

◆ moveVertex() [2/2]

bool QgsGeometry::moveVertex	(	double	x,
		double	y,
		int	atVertex
	)

Moves the vertex at the given position number and item (first number is index 0) to the given coordinates.

Returns false if atVertex does not correspond to a valid vertex on this geometry

Definition at line 478 of file qgsgeometry.cpp.

◆ nearestPoint()

QgsGeometry QgsGeometry::nearestPoint ( const QgsGeometry & other ) const

Returns the nearest (closest) point on this geometry to another geometry.

See also: shortestLine()

Since: QGIS 2.14

Definition at line 705 of file qgsgeometry.cpp.

◆ node()

QgsGeometry QgsGeometry::node ( ) const

Returns a (Multi)LineString representing the fully noded version of a collection of linestrings.

The noding preserves all of the input nodes, and introduces the least possible number of new nodes. The resulting linework is dissolved (duplicate lines are removed).

The input geometry type should be a (Multi)LineString.

Since: QGIS 3.20

Definition at line 2445 of file qgsgeometry.cpp.

◆ normalize()

void QgsGeometry::normalize ( )

Reorganizes the geometry into a normalized form (or "canonical" form).

Polygon rings will be rearranged so that their starting vertex is the lower left and ring orientation follows the right hand rule, collections are ordered by geometry type, and other normalization techniques are applied. The resultant geometry will be geometrically equivalent to the original geometry.

Since: QGIS 3.20

Definition at line 3019 of file qgsgeometry.cpp.

◆ offsetCurve()

QgsGeometry QgsGeometry::offsetCurve	(	double	distance,
		int	segments,
		Qgis::JoinStyle	joinStyle,
		double	miterLimit
	)		const

Returns an offset line at a given distance and side from an input line.

Parameters

distance	buffer distance
segments	for round joins, number of segments to approximate quarter-circle
joinStyle	join style for corners in geometry
miterLimit	limit on the miter ratio used for very sharp corners (JoinStyleMiter only)

Since: QGIS 2.4

Definition at line 2099 of file qgsgeometry.cpp.

◆ operator QVariant()

QgsGeometry::operator QVariant ( ) const

inline

Allows direct construction of QVariants from geometry.

Definition at line 2850 of file qgsgeometry.h.

◆ operator=()

QgsGeometry & QgsGeometry::operator= ( QgsGeometry const & rhs )

Creates a deep copy of the object.

Note: not available in Python bindings

Definition at line 98 of file qgsgeometry.cpp.

◆ orientedMinimumBoundingBox() [1/2]

QgsGeometry QgsGeometry::orientedMinimumBoundingBox ( ) const

Returns the oriented minimum bounding box for the geometry, which is the smallest (by area) rotated rectangle which fully encompasses the geometry.

If an error was encountered while creating the result, more information can be retrieved by calling lastError() on the returned geometry.

Since: QGIS 3.0

Definition at line 1110 of file qgsgeometry.cpp.

◆ orientedMinimumBoundingBox() [2/2]

QgsGeometry QgsGeometry::orientedMinimumBoundingBox	(	double &	area,
		double &	angle,
		double &	width,
		double &	height
	)		const

Returns the oriented minimum bounding box for the geometry, which is the smallest (by area) rotated rectangle which fully encompasses the geometry.

The area, angle (clockwise in degrees from North), width and height of the rotated bounding box will also be returned.

If an error was encountered while creating the result, more information can be retrieved by calling lastError() on the returned geometry.

See also: boundingBox()

Since: QGIS 3.0

Definition at line 1100 of file qgsgeometry.cpp.

◆ orthogonalize()

QgsGeometry QgsGeometry::orthogonalize	(	double	tolerance = `1.0E-8`,
		int	maxIterations = `1000`,
		double	angleThreshold = `15.0`
	)		const

Attempts to orthogonalize a line or polygon geometry by shifting vertices to make the geometries angles either right angles or flat lines.

This is an iterative algorithm which will loop until either the vertices are within a specified tolerance of right angles or a set number of maximum iterations is reached. The angle threshold parameter specifies how close to a right angle or straight line an angle must be before it is attempted to be straightened.

Since: QGIS 3.0

Definition at line 1199 of file qgsgeometry.cpp.

◆ overlaps()

bool QgsGeometry::overlaps ( const QgsGeometry & geometry ) const

Returns true if the geometry overlaps another geometry.

Note: For performance critical code, or when testing for overlaps against many different geometries, consider using QgsGeometryEngine instead. This approach can be many orders of magnitude faster than calling overlaps() directly. See createGeometryEngine() for details on how to use the QgsGeometryEngine class.

Since: QGIS 1.5

Definition at line 1382 of file qgsgeometry.cpp.

◆ parts()

QgsGeometryPartIterator QgsGeometry::parts ( )

Returns Java-style iterator for traversal of parts of the geometry.

This iterator can safely be used to modify parts of the geometry.

This method forces a detach. Use constParts() to avoid the detach if the parts are not going to be modified.

Example

# print the WKT representation of each part in a multi-point geometry
geometry = QgsGeometry.fromWkt( 'MultiPoint( 0 0, 1 1, 2 2)' )
for part in geometry.parts():
    print(part.asWkt())
 
# single part geometries only have one part - this loop will iterate once only
geometry = QgsGeometry.fromWkt( 'LineString( 0 0, 10 10 )' )
for part in geometry.parts():
    print(part.asWkt())
 
# parts can be modified during the iteration
geometry = QgsGeometry.fromWkt( 'MultiPoint( 0 0, 1 1, 2 2)' )
for part in geometry.parts():
    part.transform(ct)
 
# part iteration can also be combined with vertex iteration
geometry = QgsGeometry.fromWkt( 'MultiPolygon((( 0 0, 0 10, 10 10, 10 0, 0 0 ),( 5 5, 5 6, 6 6, 6 5, 5 5)),((20 2, 22 2, 22 4, 20 4, 20 2)))' )
for part in geometry.parts():
    for v in part.vertices():
        print(v.x(), v.y())

See also: constParts(); vertices()

Since: QGIS 3.6

Definition at line 2044 of file qgsgeometry.cpp.

◆ parts_begin()

QgsAbstractGeometry::part_iterator QgsGeometry::parts_begin ( )

Returns STL-style iterator pointing to the first part of the geometry.

This method forces a detach. Use const_parts_begin() to avoid the detach if the parts are not going to be modified.

Since: QGIS 3.6

Definition at line 2014 of file qgsgeometry.cpp.

◆ parts_end()

QgsAbstractGeometry::part_iterator QgsGeometry::parts_end ( )

Returns STL-style iterator pointing to the imaginary part after the last part of the geometry.

This method forces a detach. Use const_parts_begin() to avoid the detach if the parts are not going to be modified.

Since: QGIS 3.6

Definition at line 2023 of file qgsgeometry.cpp.

◆ pointOnSurface()

QgsGeometry QgsGeometry::pointOnSurface ( ) const

Returns a point guaranteed to lie on the surface of a geometry.

While the centroid() of a geometry may be located outside of the geometry itself (e.g., for concave shapes), the point on surface will always be inside the geometry.

If the input is a NULL geometry, the output will also be a NULL geometry.

If an error was encountered while creating the result, more information can be retrieved by calling lastError() on the returned geometry.

See also: centroid(); poleOfInaccessibility()

Definition at line 2319 of file qgsgeometry.cpp.

◆ poleOfInaccessibility()

QgsGeometry QgsGeometry::poleOfInaccessibility	(	double	precision,
		double *	distanceToBoundary = `nullptr`
	)		const

Calculates the approximate pole of inaccessibility for a surface, which is the most distant internal point from the boundary of the surface.

This function uses the 'polylabel' algorithm (Vladimir Agafonkin, 2016), which is an iterative approach guaranteed to find the true pole of inaccessibility within a specified tolerance. More precise tolerances require more iterations and will take longer to calculate. Optionally, the distance to the polygon boundary from the pole can be stored.

See also: centroid(); pointOnSurface()

Since: QGIS 3.0

Definition at line 2334 of file qgsgeometry.cpp.

◆ polygonize()

QgsGeometry QgsGeometry::polygonize ( const QVector< QgsGeometry > & geometries )

static

Creates a GeometryCollection geometry containing possible polygons formed from the constituent linework of a set of geometries.

The input geometries must be fully noded (i.e. nodes exist at every common intersection of the geometries). The easiest way to ensure this is to first call unaryUnion() on the set of input geometries and then pass the result to polygonize(). An empty geometry will be returned in the case of errors.

Since: QGIS 3.0

Definition at line 3101 of file qgsgeometry.cpp.

◆ randomPointsInPolygon() [1/2]

QVector< QgsPointXY > QgsGeometry::randomPointsInPolygon	(	int	count,
		const std::function< bool(const QgsPointXY &) > &	acceptPoint,
		unsigned long	seed = `0`,
		QgsFeedback *	feedback = `nullptr`,
		int	maxTriesPerPoint = `0`
	)		const

Returns a list of count random points generated inside a (multi)polygon geometry (if acceptPoint is specified, and restrictive, the number of points returned may be less than count).

Optionally, a specific random seed can be used when generating points. If seed is 0, then a completely random sequence of points will be generated.

If the source geometry is not a (multi)polygon, an empty list will be returned.

The optional feedback argument can be used to provide cancellation support during the point generation.

The acceptPoint function is used to filter result candidates. If the function returns false, then the point will not be accepted and another candidate generated.

When acceptPoint is specified, maxTriesPerPoint defines how many attempts to make before giving up generating a point.

Since: QGIS 3.10

◆ randomPointsInPolygon() [2/2]

QVector< QgsPointXY > QgsGeometry::randomPointsInPolygon	(	int	count,
		unsigned long	seed = `0`,
		QgsFeedback *	feedback = `nullptr`
	)		const

Returns a list of count random points generated inside a (multi)polygon geometry.

Optionally, a specific random seed can be used when generating points. If seed is 0, then a completely random sequence of points will be generated.

If the source geometry is not a (multi)polygon, an empty list will be returned.

The optional feedback argument can be used to provide cancellation support during the point generation.

Since: QGIS 3.10

◆ removeDuplicateNodes()

bool QgsGeometry::removeDuplicateNodes	(	double	epsilon = `4 * std::numeric_limits<double>::epsilon()`,
		bool	useZValues = `false`
	)

Removes duplicate nodes from the geometry, wherever removing the nodes does not result in a degenerate geometry.

The epsilon parameter specifies the tolerance for coordinates when determining that vertices are identical.

By default, z values are not considered when detecting duplicate nodes. E.g. two nodes with the same x and y coordinate but different z values will still be considered duplicate and one will be removed. If useZValues is true, then the z values are also tested and nodes with the same x and y but different z will be maintained.

Note that duplicate nodes are not tested between different parts of a multipart geometry. E.g. a multipoint geometry with overlapping points will not be changed by this method.

The function will return true if nodes were removed, or false if no duplicate nodes were found.

Since: QGIS 3.0

Definition at line 1257 of file qgsgeometry.cpp.

◆ removeInteriorRings()

QgsGeometry QgsGeometry::removeInteriorRings ( double minimumAllowedArea = -1 ) const

Removes the interior rings from a (multi)polygon geometry.

If the minimumAllowedArea parameter is specified then only rings smaller than this minimum area will be removed.

Since: QGIS 3.0

Definition at line 861 of file qgsgeometry.cpp.

◆ requiresConversionToStraightSegments()

bool QgsGeometry::requiresConversionToStraightSegments ( ) const

Returns true if the geometry is a curved geometry type which requires conversion to display as straight line segments.

See also: convertToStraightSegment

Since: QGIS 2.10

Definition at line 3129 of file qgsgeometry.cpp.

◆ reshapeGeometry()

Qgis::GeometryOperationResult QgsGeometry::reshapeGeometry ( const QgsLineString & reshapeLineString )

Replaces a part of this geometry with another line.

Returns: OperationResult a result code: success or reason of failure

Definition at line 1011 of file qgsgeometry.cpp.

◆ rotate()

Qgis::GeometryOperationResult QgsGeometry::rotate	(	double	rotation,
		const QgsPointXY &	center
	)

Rotate this geometry around the Z axis.

Parameters

rotation	clockwise rotation in degrees
center	rotation center

Returns: OperationResult a result code: success or reason of failure

Definition at line 910 of file qgsgeometry.cpp.

◆ roundWaves()

QgsGeometry QgsGeometry::roundWaves	(	double	wavelength,
		double	amplitude,
		bool	strictWavelength = `false`
	)		const

Constructs rounded (sine-like) waves along the boundary of the geometry, with the specified wavelength and amplitude.

By default the wavelength argument is treated as a "maximum wavelength", where the actual wavelength will be dynamically adjusted so that an exact number of waves are created along the boundaries of the geometry. If strictWavelength is set to true then the wavelength will be used exactly and an incomplete pattern may be used for the final waveform.

See also: roundWavesRandomized()

Since: QGIS 3.24

Definition at line 1230 of file qgsgeometry.cpp.

◆ roundWavesRandomized()

QgsGeometry QgsGeometry::roundWavesRandomized	(	double	minimumWavelength,
		double	maximumWavelength,
		double	minimumAmplitude,
		double	maximumAmplitude,
		unsigned long	seed = `0`
	)		const

Constructs randomized rounded (sine-like) waves along the boundary of the geometry, with the specified wavelength and amplitude ranges.

The minimumWavelength and maximumWavelength arguments set the range for the randomized wavelength. This is evaluated for each individual waveform created along the geometry boundaries, so the resultant geometry will consist of many different wavelengths.

Similarly, the minimumAmplitude and maximumAmplitude arguments define the range for the randomized amplitude of the square components. Randomized amplitude values will be calculated individually for waves placed on each either side of the input geometry boundaries.

Optionally, a specific random seed can be used when generating points. If seed is 0, then a completely random sequence of points will be generated.

See also: squareWaves()

Since: QGIS 3.24

Definition at line 1236 of file qgsgeometry.cpp.

◆ set()

void QgsGeometry::set ( QgsAbstractGeometry * geometry )

Sets the underlying geometry store.

Ownership of geometry is transferred.

Note: In QGIS 2.x this method was named setGeometry().; This method is deprecated for usage in Python and will be removed from Python bindings with QGIS 4. Using this method will confuse Python's memory management and type information system. Better create a new QgsGeometry object instead.

See also: get(); constGet()

Since: QGIS 3.0

Definition at line 147 of file qgsgeometry.cpp.

◆ sharedPaths()

QgsGeometry QgsGeometry::sharedPaths ( const QgsGeometry & other ) const

Find paths shared between the two given lineal geometries (this and other).

Returns a GeometryCollection having two elements:

first element is a MultiLineString containing shared paths having the same direction on both inputs
second element is a MultiLineString containing shared paths having the opposite direction on the two inputs

Returns a null geometry on exception.

Since: QGIS 3.20

Definition at line 2459 of file qgsgeometry.cpp.

◆ shortestLine()

QgsGeometry QgsGeometry::shortestLine ( const QgsGeometry & other ) const

Returns the shortest line joining this geometry to another geometry.

See also: nearestPoint()

Warning: QgsGeometry objects are inherently Cartesian/planar geometries, and the line returned by this method is calculated using strictly Cartesian mathematics. See QgsDistanceArea for similar methods which account for the curvature of an ellipsoidal body such as the Earth.

Since: QGIS 2.14

Definition at line 720 of file qgsgeometry.cpp.

◆ simplify()

QgsGeometry QgsGeometry::simplify ( double tolerance ) const

Returns a simplified version of this geometry using a specified tolerance value.

Definition at line 2255 of file qgsgeometry.cpp.

◆ singleSidedBuffer()

QgsGeometry QgsGeometry::singleSidedBuffer	(	double	distance,
		int	segments,
		Qgis::BufferSide	side,
		Qgis::JoinStyle	joinStyle = `Qgis::JoinStyle::Round`,
		double	miterLimit = `2.0`
	)		const

Returns a single sided buffer for a (multi)line geometry.

The buffer is only applied to one side of the line.

Parameters

distance	buffer distance
segments	for round joins, number of segments to approximate quarter-circle
side	side of geometry to buffer
joinStyle	join style for corners
miterLimit	limit on the miter ratio used for very sharp corners

Returns: buffered geometry, or an empty geometry if buffer could not be calculated

See also: buffer(); taperedBuffer()

Since: QGIS 3.0

Definition at line 2157 of file qgsgeometry.cpp.

◆ smooth()

QgsGeometry QgsGeometry::smooth	(	unsigned int	iterations = `1`,
		double	offset = `0.25`,
		double	minimumDistance = `-1.0`,
		double	maxAngle = `180.0`
	)		const

Smooths a geometry by rounding off corners using the Chaikin algorithm.

This operation roughly doubles the number of vertices in a geometry.

If input geometries contain Z or M values, these will also be smoothed and the output geometry will retain the same dimensionality as the input geometry.

Parameters

iterations	number of smoothing iterations to run. More iterations results in a smoother geometry
offset	fraction of line to create new vertices along, between 0 and 1.0, e.g., the default value of 0.25 will create new vertices 25% and 75% along each line segment of the geometry for each iteration. Smaller values result in "tighter" smoothing.
minimumDistance	minimum segment length to apply smoothing to
maxAngle	maximum angle at node (0-180) at which smoothing will be applied

Since: QGIS 2.9

Definition at line 3495 of file qgsgeometry.cpp.

◆ snappedToGrid()

QgsGeometry QgsGeometry::snappedToGrid	(	double	hSpacing,
		double	vSpacing,
		double	dSpacing = `0`,
		double	mSpacing = `0`
	)		const

Returns a new geometry with all points or vertices snapped to the closest point of the grid.

If the gridified geometry could not be calculated (or was totally collapsed) an empty geometry will be returned. Note that snapping to grid may generate an invalid geometry in some corner cases. It can also be thought as rounding the edges and it may be useful for removing errors.

Parameters

hSpacing	Horizontal spacing of the grid (x axis). 0 to disable.
vSpacing	Vertical spacing of the grid (y axis). 0 to disable.
dSpacing	Depth spacing of the grid (z axis). 0 (default) to disable.
mSpacing	Custom dimension spacing of the grid (m axis). 0 (default) to disable.

Since: 3.0

Definition at line 1248 of file qgsgeometry.cpp.

◆ splitGeometry() [1/3]

Qgis::GeometryOperationResult QgsGeometry::splitGeometry	(	const QgsCurve *	curve,
		QVector< QgsGeometry > &	newGeometries,
		bool	preserveCircular,
		bool	topological,
		QgsPointSequence &	topologyTestPoints,
		bool	splitFeature = `true`
	)

Splits this geometry according to a given curve.

Parameters

	curve	the curve that splits the geometry
[out]	newGeometries	list of new geometries that have been created with the `splitLine`. If the geometry is 3D, a linear interpolation of the z value is performed on the geometry at split points, see example.
	preserveCircular	whether if circular strings are preserved after splitting
	topological	`true` if topological editing is enabled
[out]	topologyTestPoints	points that need to be tested for topological completeness in the dataset
	splitFeature	Set to `true` if you want to split a feature, otherwise set to `false` to split parts

Returns: OperationResult a result code: success or reason of failure

Since: QGIS 3.16

Definition at line 991 of file qgsgeometry.cpp.

◆ splitGeometry() [2/3]

Qgis::GeometryOperationResult QgsGeometry::splitGeometry	(	const QgsPointSequence &	splitLine,
		QVector< QgsGeometry > &	newGeometries,
		bool	topological,
		QgsPointSequence &	topologyTestPoints,
		bool	splitFeature = `true`,
		bool	skipIntersectionTest = `false`
	)

Splits this geometry according to a given line.

Parameters

	splitLine	the line that splits the geometry
[out]	newGeometries	list of new geometries that have been created with the `splitLine`. If the geometry is 3D, a linear interpolation of the z value is performed on the geometry at split points, see example.
	topological	`true` if topological editing is enabled
[out]	topologyTestPoints	points that need to be tested for topological completeness in the dataset
	splitFeature	Set to `true` if you want to split a feature, otherwise set to `false` to split parts fix this bug?
	skipIntersectionTest	set to `true` to skip the potentially expensive initial intersection check. Only set this flag if an intersection test has already been performed by the caller! Not available in Python bindings.

Returns: OperationResult a result code: success or reason of failure

Example:

geometry = QgsGeometry.fromWkt('CompoundCurveZ ((2749546.2003820720128715 1262904.45356595050543547 100, 2749557.82053794478997588 1262920.05570670193992555 200))')
split_line = [QgsPoint(2749544.19, 1262914.79), QgsPoint(2749557.64, 1262897.30)]
result, new_geometries, point_xy = geometry.splitGeometry(split_line, False)
print(geometry.asWkt(2))
> LineStringZ (2749549.12 1262908.38 125.14, 2749557.82 1262920.06 200)

QGIS uses GEOS algorithm to split geometries. Using 3D points in GEOS will returns an interpolation value which is the mean between geometries. On the contrary, in our logic, the interpolation is a linear interpolation on the split point. By dropping Z/M value, GEOS will returns the expected result. See https://github.com/qgis/QGIS/issues/33489

Definition at line 935 of file qgsgeometry.cpp.

◆ splitGeometry() [3/3]

Qgis::GeometryOperationResult QgsGeometry::splitGeometry	(	const QVector< QgsPointXY > &	splitLine,
		QVector< QgsGeometry > &	newGeometries,
		bool	topological,
		QVector< QgsPointXY > &	topologyTestPoints,
		bool	splitFeature = `true`
	)

Splits this geometry according to a given line.

Parameters

	splitLine	the line that splits the geometry
[out]	newGeometries	list of new geometries that have been created with the split
	topological	`true` if topological editing is enabled
[out]	topologyTestPoints	points that need to be tested for topological completeness in the dataset
	splitFeature	Set to `true` if you want to split a feature, otherwise set to `false` to split parts

Returns: OperationResult a result code: success or reason of failure

Deprecated:: since QGIS 3.12 - will be removed in QGIS 4.0. Use the variant which accepts QgsPoint objects instead of QgsPointXY.

Definition at line 926 of file qgsgeometry.cpp.

◆ sqrDistToVertexAt()

double QgsGeometry::sqrDistToVertexAt	(	QgsPointXY &point	SIP_IN,
		int	atVertex
	)		const

Returns the squared Cartesian distance between the given point to the given vertex index (vertex at the given position number, ring and item (first number is index 0))

Definition at line 699 of file qgsgeometry.cpp.

◆ squareWaves()

QgsGeometry QgsGeometry::squareWaves	(	double	wavelength,
		double	amplitude,
		bool	strictWavelength = `false`
	)		const

Constructs square waves along the boundary of the geometry, with the specified wavelength and amplitude.

By default the wavelength argument is treated as a "maximum wavelength", where the actual wavelength will be dynamically adjusted so that an exact number of square waves are created along the boundaries of the geometry. If strictWavelength is set to true then the wavelength will be used exactly and an incomplete pattern may be used for the final waveform.

See also: squareWavesRandomized()

Since: QGIS 3.24

Definition at line 1218 of file qgsgeometry.cpp.

◆ squareWavesRandomized()

QgsGeometry QgsGeometry::squareWavesRandomized	(	double	minimumWavelength,
		double	maximumWavelength,
		double	minimumAmplitude,
		double	maximumAmplitude,
		unsigned long	seed = `0`
	)		const

Constructs randomized square waves along the boundary of the geometry, with the specified wavelength and amplitude ranges.

The minimumWavelength and maximumWavelength arguments set the range for the randomized wavelength. This is evaluated for each individual square waveform created along the geometry boundaries, so the resultant geometry will consist of many different wavelengths.

Similarly, the minimumAmplitude and maximumAmplitude arguments define the range for the randomized amplitude of the square components. Randomized amplitude values will be calculated individually for squares placed on each either side of the input geometry boundaries.

Optionally, a specific random seed can be used when generating points. If seed is 0, then a completely random sequence of points will be generated.

See also: squareWaves()

Since: QGIS 3.24

Definition at line 1224 of file qgsgeometry.cpp.

◆ subdivide()

QgsGeometry QgsGeometry::subdivide ( int maxNodes = 256 ) const

Subdivides the geometry.

The returned geometry will be a collection containing subdivided parts from the original geometry, where no part has more then the specified maximum number of nodes (maxNodes).

This is useful for dividing a complex geometry into less complex parts, which are better able to be spatially indexed and faster to perform further operations such as intersects on. The returned geometry parts may not be valid and may contain self-intersections.

The minimum allowed value for maxNodes is 8.

Curved geometries will be segmentized before subdivision.

If the input is a NULL geometry, the output will also be a NULL geometry.

If an error was encountered while creating the result, more information can be retrieved by calling lastError() on the returned geometry.

Since: QGIS 3.0

Definition at line 2473 of file qgsgeometry.cpp.

◆ symDifference()

QgsGeometry QgsGeometry::symDifference ( const QgsGeometry & geometry ) const

Returns a geometry representing the points making up this geometry that do not make up other.

If the input is a NULL geometry, the output will also be a NULL geometry.

If an error was encountered while creating the result, more information can be retrieved by calling lastError() on the returned geometry.

Definition at line 2708 of file qgsgeometry.cpp.

◆ taperedBuffer()

QgsGeometry QgsGeometry::taperedBuffer	(	double	startWidth,
		double	endWidth,
		int	segments
	)		const

Calculates a variable width buffer ("tapered buffer") for a (multi)curve geometry.

The buffer begins at a width of startWidth at the start of each curve, and ends at a width of endWidth. Note that unlike buffer() methods, startWidth and endWidth are the diameter of the buffer at these points, not the radius.

The segments argument specifies the number of segments to approximate quarter-circle curves in the buffer.

Non (multi)curve input geometries will return a null output geometry.

See also: buffer(); singleSidedBuffer(); variableWidthBufferByM()

Since: QGIS 3.2

Definition at line 2201 of file qgsgeometry.cpp.

◆ toggleCircularAtVertex()

bool QgsGeometry::toggleCircularAtVertex ( int atVertex )

Converts the vertex at the given position from/to circular.

Returns: false if atVertex does not correspond to a valid vertex on this geometry (including if this geometry is a Point), or if the specified vertex can't be converted (e.g. start/end points).

Since: QGIS 3.20

Definition at line 547 of file qgsgeometry.cpp.

◆ touches()

bool QgsGeometry::touches ( const QgsGeometry & geometry ) const

Returns true if the geometry touches another geometry.

Note: For performance critical code, or when testing for touches against many different geometries, consider using QgsGeometryEngine instead. This approach can be many orders of magnitude faster than calling touches() directly. See createGeometryEngine() for details on how to use the QgsGeometryEngine class.

Since: QGIS 1.5

Definition at line 1370 of file qgsgeometry.cpp.

◆ transform() [1/2]

Qgis::GeometryOperationResult QgsGeometry::transform	(	const QgsCoordinateTransform &	ct,
		Qgis::TransformDirection	direction = `Qgis::TransformDirection::Forward`,
		bool	transformZ = `false`
	)

Transforms this geometry as described by the coordinate transform ct.

The transformation defaults to a forward transform, but the direction can be swapped by setting the direction argument.

By default, z-coordinates are not transformed, even if the coordinate transform includes a vertical datum transformation. To transform z-coordinates, set transformZ to true. This requires that the z coordinates in the geometry represent height relative to the vertical datum of the source CRS (generally ellipsoidal heights) and are expressed in its vertical units (generally meters).

Returns: OperationResult a result code: success or reason of failure

Definition at line 3139 of file qgsgeometry.cpp.

◆ transform() [2/2]

Qgis::GeometryOperationResult QgsGeometry::transform	(	const QTransform &	t,
		double	zTranslate = `0.0`,
		double	zScale = `1.0`,
		double	mTranslate = `0.0`,
		double	mScale = `1.0`
	)

Transforms the x and y components of the geometry using a QTransform object t.

Optionally, the geometry's z values can be scaled via zScale and translated via zTranslate. Similarly, m-values can be scaled via mScale and translated via mTranslate.

Returns: OperationResult a result code: success or reason of failure

Definition at line 3151 of file qgsgeometry.cpp.

◆ transformVertices()

void QgsGeometry::transformVertices ( const std::function< QgsPoint(const QgsPoint &) > & transform )

Transforms the vertices from the geometry in place, applying the transform function to every vertex.

Depending on the transform used, this may result in an invalid geometry.

Transform functions are not permitted to alter the dimensionality of vertices. If a transform which adds (or removes) z/m values is desired, first call the corresponding addZValue() or addMValue() function to change the geometry's dimensionality and then transform.

Note: Not available in Python bindings

Since: QGIS 3.4

Definition at line 3334 of file qgsgeometry.cpp.

◆ translate()

Qgis::GeometryOperationResult QgsGeometry::translate	(	double	dx,
		double	dy,
		double	dz = `0.0`,
		double	dm = `0.0`
	)

Translates this geometry by dx, dy, dz and dm.

Returns: OperationResult a result code: success or reason of failure

Definition at line 897 of file qgsgeometry.cpp.

◆ triangularWaves()

QgsGeometry QgsGeometry::triangularWaves	(	double	wavelength,
		double	amplitude,
		bool	strictWavelength = `false`
	)		const

Constructs triangular waves along the boundary of the geometry, with the specified wavelength and amplitude.

By default the wavelength argument is treated as a "maximum wavelength", where the actual wavelength will be dynamically adjusted so that an exact number of triangular waves are created along the boundaries of the geometry. If strictWavelength is set to true then the wavelength will be used exactly and an incomplete pattern may be used for the final waveform.

See also: triangularWavesRandomized()

Since: QGIS 3.24

Definition at line 1206 of file qgsgeometry.cpp.

◆ triangularWavesRandomized()

QgsGeometry QgsGeometry::triangularWavesRandomized	(	double	minimumWavelength,
		double	maximumWavelength,
		double	minimumAmplitude,
		double	maximumAmplitude,
		unsigned long	seed = `0`
	)		const

Constructs randomized triangular waves along the boundary of the geometry, with the specified wavelength and amplitude ranges.

The minimumWavelength and maximumWavelength arguments set the range for the randomized wavelength. This is evaluated for each individual triangular waveform created along the geometry boundaries, so the resultant geometry will consist of many different wavelengths.

Similarly, the minimumAmplitude and maximumAmplitude arguments define the range for the randomized amplitude of the triangular components. Randomized amplitude values will be calculated individually for triangles placed on each either side of the input geometry boundaries.

Optionally, a specific random seed can be used when generating points. If seed is 0, then a completely random sequence of points will be generated.

See also: triangularWaves()

Since: QGIS 3.24

Definition at line 1212 of file qgsgeometry.cpp.

◆ type()

QgsWkbTypes::GeometryType QgsGeometry::type ( ) const

Returns type of the geometry as a QgsWkbTypes::GeometryType.

See also: wkbType

Definition at line 370 of file qgsgeometry.cpp.

◆ unaryUnion()

QgsGeometry QgsGeometry::unaryUnion ( const QVector< QgsGeometry > & geometries )

static

Compute the unary union on a list of geometries.

May be faster than an iterative union on a set of geometries. The returned geometry will be fully noded, i.e. a node will be created at every common intersection of the input geometries. An empty geometry will be returned in the case of errors.

Definition at line 3090 of file qgsgeometry.cpp.

◆ validateGeometry()

void QgsGeometry::validateGeometry	(	QVector< QgsGeometry::Error > &	errors,
		Qgis::GeometryValidationEngine	method = `Qgis::GeometryValidationEngine::QgisInternal`,
		Qgis::GeometryValidityFlags	flags = `Qgis::GeometryValidityFlags()`
	)		const

Validates geometry and produces a list of geometry errors.

The method argument dictates which validator to utilize.

The flags parameter indicates optional flags which control the type of validity checking performed.

Since: QGIS 1.5

Definition at line 2979 of file qgsgeometry.cpp.

◆ variableWidthBufferByM()

QgsGeometry QgsGeometry::variableWidthBufferByM ( int segments ) const

Calculates a variable width buffer for a (multi)linestring geometry, where the width at each node is taken from the linestring m values.

The segments argument specifies the number of segments to approximate quarter-circle curves in the buffer.

Non (multi)linestring input geometries will return a null output geometry.

See also: buffer(); singleSidedBuffer(); taperedBuffer()

Since: QGIS 3.2

Definition at line 2208 of file qgsgeometry.cpp.

◆ vertexAt()

QgsPoint QgsGeometry::vertexAt ( int atVertex ) const

Returns coordinates of a vertex.

Parameters

atVertex index of the vertex

Returns: Coordinates of the vertex or empty QgsPoint on error

Definition at line 683 of file qgsgeometry.cpp.

◆ vertexIdFromVertexNr()

bool QgsGeometry::vertexIdFromVertexNr	(	int	number,
		QgsVertexId &	id
	)		const

Calculates the vertex ID from a vertex number.

If a matching vertex was found, it will be stored in id.

Returns true if vertex was found.

See also: vertexNrFromVertexId()

Since: QGIS 2.10

Definition at line 3274 of file qgsgeometry.cpp.

◆ vertexNrFromVertexId()

int QgsGeometry::vertexNrFromVertexId ( QgsVertexId id ) const

Returns the vertex number corresponding to a vertex id.

The vertex numbers start at 0, so a return value of 0 corresponds to the first vertex.

Returns -1 if a corresponding vertex could not be found.

See also: vertexIdFromVertexNr()

Since: QGIS 2.10

Definition at line 3310 of file qgsgeometry.cpp.

◆ vertices()

QgsVertexIterator QgsGeometry::vertices ( ) const

Returns a read-only, Java-style iterator for traversal of vertices of all the geometry, including all geometry parts and rings.

Warning: The iterator returns a copy of individual vertices, and accordingly geometries cannot be modified using the iterator. See transformVertices() for a safe method to modify vertices "in-place".

Example

# print the x and y coordinate for each vertex in a LineString
geometry = QgsGeometry.fromWkt( 'LineString( 0 0, 1 1, 2 2)' )
for v in geometry.vertices():
    print(v.x(), v.y())
 
# vertex iteration includes all parts and rings
geometry = QgsGeometry.fromWkt( 'MultiPolygon((( 0 0, 0 10, 10 10, 10 0, 0 0 ),( 5 5, 5 6, 6 6, 6 5, 5 5)),((20 2, 22 2, 22 4, 20 4, 20 2)))' )
for v in geometry.vertices():
    print(v.x(), v.y())

See also: parts()

Since: QGIS 3.0

Definition at line 2007 of file qgsgeometry.cpp.

◆ vertices_begin()

QgsAbstractGeometry::vertex_iterator QgsGeometry::vertices_begin ( ) const

Returns STL-style iterator pointing to the first vertex of the geometry.

Since: QGIS 3.0

Definition at line 1993 of file qgsgeometry.cpp.

◆ vertices_end()

QgsAbstractGeometry::vertex_iterator QgsGeometry::vertices_end ( ) const

Returns STL-style iterator pointing to the imaginary vertex after the last vertex of the geometry.

Since: QGIS 3.0

Definition at line 2000 of file qgsgeometry.cpp.

◆ voronoiDiagram()

QgsGeometry QgsGeometry::voronoiDiagram	(	const QgsGeometry &	extent = `QgsGeometry()`,
		double	tolerance = `0.0`,
		bool	edgesOnly = `false`
	)		const

Creates a Voronoi diagram for the nodes contained within the geometry.

Returns the Voronoi polygons for the nodes contained within the geometry. If extent is specified then it will be used as a clipping envelope for the diagram. If no extent is set then the clipping envelope will be automatically calculated. In either case the diagram will be clipped to the larger of the provided envelope OR the envelope surrounding all input nodes. The tolerance parameter specifies an optional snapping tolerance which can be used to improve the robustness of the diagram calculation. If edgesOnly is true than line string boundary geometries will be returned instead of polygons. An empty geometry will be returned if the diagram could not be calculated.

Since: QGIS 3.0

Definition at line 2417 of file qgsgeometry.cpp.

◆ within()

bool QgsGeometry::within ( const QgsGeometry & geometry ) const

Returns true if the geometry is completely within another geometry.

Note: For performance critical code, or when testing for within against many different geometries, consider using QgsGeometryEngine instead. This approach can be many orders of magnitude faster than calling within() directly. See createGeometryEngine() for details on how to use the QgsGeometryEngine class.

Since: QGIS 1.5

Definition at line 1394 of file qgsgeometry.cpp.

◆ wkbSize()

int QgsGeometry::wkbSize ( QgsAbstractGeometry::WkbFlags flags = QgsAbstractGeometry::WkbFlags() ) const

Returns the length of the QByteArray returned by asWkb()

The optional flags argument specifies flags controlling WKB export behavior

Since: QGIS 3.16

Definition at line 2754 of file qgsgeometry.cpp.

◆ wkbType()

QgsWkbTypes::Type QgsGeometry::wkbType ( ) const

Returns type of the geometry as a WKB type (point / linestring / polygon etc.)

See also: type

Definition at line 357 of file qgsgeometry.cpp.

Friends And Related Function Documentation

◆ QgsInternalGeometryEngine

friend class QgsInternalGeometryEngine

friend

Definition at line 2912 of file qgsgeometry.h.

Property Documentation

◆ isNull

Q_GADGET bool QgsGeometry::isNull

read

Definition at line 126 of file qgsgeometry.h.

◆ type

QgsWkbTypes::GeometryType QgsGeometry::type

read

Definition at line 126 of file qgsgeometry.h.

The documentation for this class was generated from the following files:

/build/qgis-3.24.2+99sid/src/core/geometry/qgsgeometry.h
/build/qgis-3.24.2+99sid/src/core/geometry/qgsgeometry.cpp

Classes

Public Member Functions

Static Public Member Functions

Properties

Friends

Detailed Description

Constructor & Destructor Documentation

◆ QgsGeometry() [1/4]

◆ QgsGeometry() [2/4]

◆ QgsGeometry() [3/4]

◆ QgsGeometry() [4/4]

◆ ~QgsGeometry()

Member Function Documentation

◆ addPart() [1/4]

◆ addPart() [2/4]

◆ addPart() [3/4]

◆ addPart() [4/4]

◆ addRing() [1/2]

◆ addRing() [2/2]

◆ adjacentVertices()

If the given vertex index is at the end of a linestring,

If the given vertex index is at the end of a linear ring

◆ angleAtVertex()

◆ applyDashPattern()

◆ area()

◆ asGeometryCollection()

◆ asJson()

◆ asJsonObject()

◆ asMultiPoint()

◆ asMultiPolygon()

◆ asMultiPolyline()

◆ asPoint()

◆ asPolygon()

◆ asPolyline()

◆ asQPointF()

◆ asQPolygonF()

◆ asWkb()

◆ asWkt()

◆ avoidIntersections()

◆ boundingBox()

◆ boundingBoxIntersects() [1/2]

◆ boundingBoxIntersects() [2/2]

◆ buffer() [1/2]

◆ buffer() [2/2]

◆ centroid()

◆ clipped()

◆ closestSegmentWithContext()

◆ closestVertex()

◆ closestVertexWithContext()

◆ coerceToType()

◆ collectGeometry()

◆ combine()

◆ compare() [1/3]

◆ compare() [2/3]

◆ compare() [3/3]

◆ const_parts_begin()

◆ const_parts_end()

◆ constGet()

◆ constParts()

Example

◆ contains() [1/2]

◆ contains() [2/2]

◆ convertGeometryCollectionToSubclass()

◆ convertPointList() [1/2]

◆ convertPointList() [2/2]

◆ convertToCurves()

◆ convertToMultiType()

◆ convertToSingleType()

◆ convertToStraightSegment()

◆ convertToType()

◆ convexHull()

◆ createGeometryEngine()

Example

◆ createPolygonFromQPolygonF()

◆ createPolylineFromQPolygonF()

◆ createWedgeBuffer()

◆ crosses()

◆ delaunayTriangulation()

◆ deletePart()

◆ deleteRing()