Interface for Triangulation classes. More...

#include <qgstriangulation.h>

Inheritance diagram for QgsTriangulation:

[legend]

Public Types
enum	ForcedCrossBehavior { SnappingTypeVertex , DeleteFirst , InsertVertex }
	Enumeration describing the behavior, if two forced lines cross. More...

Public Member Functions
virtual	~QgsTriangulation ()=default

virtual void	addLine (const QgsPointSequence &points, QgsInterpolator::SourceType lineType)=0
	Adds a line (e.g. More...

virtual int	addPoint (const QgsPoint &point)=0
	Adds a point to the triangulation. More...

virtual bool	calcNormal (double x, double y, QgsPoint &result)=0
	Calculates the normal at a point on the surface and assigns it to 'result'. More...

virtual bool	calcPoint (double x, double y, QgsPoint &result)=0
	Calculates x-, y and z-value of the point on the surface and assigns it to 'result'. More...

virtual void	eliminateHorizontalTriangles ()=0
	Eliminates the horizontal triangles by swapping. More...

virtual int	oppositePoint (int p1, int p2)=0
	Returns the number of the point opposite to the triangle points p1, p2 (which have to be on a halfedge). More...

virtual void	performConsistencyTest ()=0
	Performs a consistency check, remove this later. More...

virtual QgsPoint *	point (int i) const =0
	Returns a pointer to the point with number i. More...

virtual bool	pointInside (double x, double y)=0
	Returns `true`, if the point with coordinates x and y is inside the convex hull and `false` otherwise. More...

virtual QList< int >	pointsAroundEdge (double x, double y)=0
	Returns a value list with the numbers of the four points, which would be affected by an edge swap. More...

virtual int	pointsCount () const =0
	Returns the number of points. More...

virtual void	ruppertRefinement ()=0
	Adds points to make the triangles better shaped (algorithm of ruppert) More...

virtual bool	saveTriangulation (QgsFeatureSink sink, QgsFeedback feedback=nullptr) const =0
	Saves the triangulation features to a feature sink. More...

virtual void	setForcedCrossBehavior (QgsTriangulation::ForcedCrossBehavior b)=0
	Draws the points, edges and the forced lines. More...

virtual void	setTriangleInterpolator (TriangleInterpolator *interpolator)=0
	Sets an interpolator object. More...

virtual QList< int >	surroundingTriangles (int pointno)=0
	Returns a value list with the information of the triangles surrounding (counterclockwise) a point. More...

virtual bool	swapEdge (double x, double y)=0
	Reads the content of a taff-file. More...

virtual bool	triangleVertices (double x, double y, QgsPoint &p1, int &n1, QgsPoint &p2, int &n2, QgsPoint &p3, int &n3)=0
	Finds out in which triangle the point with coordinates x and y is and assigns the numbers of the vertices to 'n1', 'n2' and 'n3' and the vertices to 'p1', 'p2' and 'p3'. More...

virtual bool	triangleVertices (double x, double y, QgsPoint &p1, QgsPoint &p2, QgsPoint &p3)=0
	Finds out, in which triangle the point with coordinates x and y is and assigns the points at the vertices to 'p1', 'p2' and 'p3. More...

virtual QgsMesh	triangulationToMesh (QgsFeedback *feedback=nullptr) const =0
	Returns a QgsMesh corresponding to the triangulation. More...

virtual double	xMax () const =0
	Returns the largest x-coordinate value of the bounding box. More...

virtual double	xMin () const =0
	Returns the smallest x-coordinate value of the bounding box. More...

virtual double	yMax () const =0
	Returns the largest y-coordinate value of the bounding box. More...

virtual double	yMin () const =0
	Returns the smallest x-coordinate value of the bounding box. More...

Static Public Member Functions
static QgsFields	triangulationFields ()
	Returns the fields output by features when calling saveTriangulation(). More...

Detailed Description

Interface for Triangulation classes.

Note: Not available in Python bindings.

Since: QGIS 3.16

Definition at line 41 of file qgstriangulation.h.

Member Enumeration Documentation

◆ ForcedCrossBehavior

enum QgsTriangulation::ForcedCrossBehavior

Enumeration describing the behavior, if two forced lines cross.

Enumerator
SnappingTypeVertex	The second inserted forced line is snapped to the closest vertice of the first inserted forced line.
DeleteFirst	The status of the first inserted forced line is reset to that of a normal edge (so that the second inserted forced line remain and the first not)
InsertVertex

Definition at line 45 of file qgstriangulation.h.

Constructor & Destructor Documentation

◆ ~QgsTriangulation()

virtual QgsTriangulation::~QgsTriangulation ( )

virtualdefault

Member Function Documentation

◆ addLine()

virtual void QgsTriangulation::addLine	(	const QgsPointSequence &	points,
		QgsInterpolator::SourceType	lineType
	)

pure virtual

Adds a line (e.g.

a break-, structure- or an isoline) to the triangulation, by specifying a list of source points.

Implemented in TriDecorator, and QgsDualEdgeTriangulation.

◆ addPoint()

virtual int QgsTriangulation::addPoint ( const QgsPoint & point )

pure virtual

Adds a point to the triangulation.

The point should have a z-value matching the value to interpolate.

Implemented in TriDecorator, QgsDualEdgeTriangulation, and NormVecDecorator.

◆ calcNormal()

virtual bool QgsTriangulation::calcNormal	(	double	x,
		double	y,
		QgsPoint &	result
	)

pure virtual

Calculates the normal at a point on the surface and assigns it to 'result'.

Returns: true in case of success and false in case of failure

Implemented in TriDecorator, QgsDualEdgeTriangulation, and NormVecDecorator.

◆ calcPoint()

virtual bool QgsTriangulation::calcPoint	(	double	x,
		double	y,
		QgsPoint &	result
	)

pure virtual

Calculates x-, y and z-value of the point on the surface and assigns it to 'result'.

Returns true in case of success and false in case of failure

Implemented in TriDecorator, QgsDualEdgeTriangulation, and NormVecDecorator.

◆ eliminateHorizontalTriangles()

virtual void QgsTriangulation::eliminateHorizontalTriangles ( )

pure virtual

Eliminates the horizontal triangles by swapping.

Implemented in TriDecorator, QgsDualEdgeTriangulation, and NormVecDecorator.

◆ oppositePoint()

virtual int QgsTriangulation::oppositePoint	(	int	p1,
		int	p2
	)

pure virtual

Returns the number of the point opposite to the triangle points p1, p2 (which have to be on a halfedge).

Returns -1 if point is a virtual point. Returns -10 if point crosses over edges.

Implemented in TriDecorator, and QgsDualEdgeTriangulation.

◆ performConsistencyTest()

virtual void QgsTriangulation::performConsistencyTest ( )

pure virtual

Performs a consistency check, remove this later.

Implemented in TriDecorator, and QgsDualEdgeTriangulation.

◆ point()

virtual QgsPoint* QgsTriangulation::point ( int i ) const

pure virtual

Returns a pointer to the point with number i.

Implemented in TriDecorator, and QgsDualEdgeTriangulation.

◆ pointInside()

virtual bool QgsTriangulation::pointInside	(	double	x,
		double	y
	)

pure virtual

Returns true, if the point with coordinates x and y is inside the convex hull and false otherwise.

Implemented in TriDecorator, and QgsDualEdgeTriangulation.

◆ pointsAroundEdge()

virtual QList<int> QgsTriangulation::pointsAroundEdge	(	double	x,
		double	y
	)

pure virtual

Returns a value list with the numbers of the four points, which would be affected by an edge swap.

This function is e.g. needed by NormVecDecorator to know the points, for which the normals have to be recalculated. The list has to be deleted by the code which calls this method

Implemented in TriDecorator, and QgsDualEdgeTriangulation.

◆ pointsCount()

virtual int QgsTriangulation::pointsCount ( ) const

pure virtual

Returns the number of points.

Implemented in TriDecorator, and QgsDualEdgeTriangulation.

◆ ruppertRefinement()

virtual void QgsTriangulation::ruppertRefinement ( )

pure virtual

Adds points to make the triangles better shaped (algorithm of ruppert)

Implemented in TriDecorator, and QgsDualEdgeTriangulation.

◆ saveTriangulation()

virtual bool QgsTriangulation::saveTriangulation	(	QgsFeatureSink *	sink,
		QgsFeedback *	feedback = `nullptr`
	)		const

pure virtual

Saves the triangulation features to a feature sink.

The sink must be setup to accept LineString features, with fields matching those returned by triangulationFields().

Returns: true in case of success

See also: triangulationFields()

Since: QGIS 3.0

Implemented in QgsDualEdgeTriangulation, and NormVecDecorator.

◆ setForcedCrossBehavior()

virtual void QgsTriangulation::setForcedCrossBehavior ( QgsTriangulation::ForcedCrossBehavior b )

pure virtual

Draws the points, edges and the forced lines.

Sets the behavior of the triangulation in case of crossing forced lines

Implemented in TriDecorator, and QgsDualEdgeTriangulation.

◆ setTriangleInterpolator()

virtual void QgsTriangulation::setTriangleInterpolator ( TriangleInterpolator * interpolator )

pure virtual

Sets an interpolator object.

Implemented in TriDecorator, QgsDualEdgeTriangulation, and NormVecDecorator.

◆ surroundingTriangles()

virtual QList<int> QgsTriangulation::surroundingTriangles ( int pointno )

pure virtual

Returns a value list with the information of the triangles surrounding (counterclockwise) a point.

Four integer values describe a triangle, the first three are the number of the half edges of the triangle and the fourth is -10, if the third (and most counterclockwise) edge is a breakline, and -20 otherwise. Any virtual point needs to have the number -1

Implemented in TriDecorator, and QgsDualEdgeTriangulation.

◆ swapEdge()

virtual bool QgsTriangulation::swapEdge	(	double	x,
		double	y
	)

pure virtual

Reads the content of a taff-file.

Saves the content to a taff file Swaps the edge which is closest to the point with x and y coordinates (if this is possible)

Implemented in TriDecorator, QgsDualEdgeTriangulation, and NormVecDecorator.

◆ triangleVertices() [1/2]

virtual bool QgsTriangulation::triangleVertices	(	double	x,
		double	y,
		QgsPoint &	p1,
		int &	n1,
		QgsPoint &	p2,
		int &	n2,
		QgsPoint &	p3,
		int &	n3
	)

pure virtual

Finds out in which triangle the point with coordinates x and y is and assigns the numbers of the vertices to 'n1', 'n2' and 'n3' and the vertices to 'p1', 'p2' and 'p3'.

Implemented in TriDecorator, and QgsDualEdgeTriangulation.

◆ triangleVertices() [2/2]

virtual bool QgsTriangulation::triangleVertices	(	double	x,
		double	y,
		QgsPoint &	p1,
		QgsPoint &	p2,
		QgsPoint &	p3
	)

pure virtual

Finds out, in which triangle the point with coordinates x and y is and assigns the points at the vertices to 'p1', 'p2' and 'p3.

Implemented in TriDecorator, and QgsDualEdgeTriangulation.

◆ triangulationFields()

QgsFields QgsTriangulation::triangulationFields ( )

static

Returns the fields output by features when calling saveTriangulation().

These fields should be used when creating a suitable feature sink for saveTriangulation()

See also: saveTriangulation()

Since: QGIS 3.0

Definition at line 18 of file qgstriangulation.cpp.

◆ triangulationToMesh()

virtual QgsMesh QgsTriangulation::triangulationToMesh ( QgsFeedback * feedback = nullptr ) const

pure virtual

Returns a QgsMesh corresponding to the triangulation.

Since: QGIS 3.16

Implemented in QgsDualEdgeTriangulation, and NormVecDecorator.

◆ xMax()

virtual double QgsTriangulation::xMax ( ) const

pure virtual

Returns the largest x-coordinate value of the bounding box.

Implemented in TriDecorator, and QgsDualEdgeTriangulation.

◆ xMin()

virtual double QgsTriangulation::xMin ( ) const

pure virtual

Returns the smallest x-coordinate value of the bounding box.

Implemented in TriDecorator, and QgsDualEdgeTriangulation.

◆ yMax()

virtual double QgsTriangulation::yMax ( ) const

pure virtual

Returns the largest y-coordinate value of the bounding box.

Implemented in TriDecorator, and QgsDualEdgeTriangulation.

◆ yMin()

virtual double QgsTriangulation::yMin ( ) const

pure virtual

Returns the smallest x-coordinate value of the bounding box.

Implemented in TriDecorator, and QgsDualEdgeTriangulation.

The documentation for this class was generated from the following files:

/build/qgis-3.22.4+99unstable/src/analysis/interpolation/qgstriangulation.h
/build/qgis-3.22.4+99unstable/src/analysis/interpolation/qgstriangulation.cpp

Public Types

Public Member Functions

Static Public Member Functions

Detailed Description

Member Enumeration Documentation

◆ ForcedCrossBehavior

Constructor & Destructor Documentation

◆ ~QgsTriangulation()

Member Function Documentation

◆ addLine()

◆ addPoint()

◆ calcNormal()

◆ calcPoint()

◆ eliminateHorizontalTriangles()

◆ oppositePoint()

◆ performConsistencyTest()

◆ point()

◆ pointInside()

◆ pointsAroundEdge()

◆ pointsCount()

◆ ruppertRefinement()

◆ saveTriangulation()

◆ setForcedCrossBehavior()

◆ setTriangleInterpolator()

◆ surroundingTriangles()

◆ swapEdge()

◆ triangleVertices() [1/2]

◆ triangleVertices() [2/2]

◆ triangulationFields()

◆ triangulationToMesh()

◆ xMax()

◆ xMin()

◆ yMax()

◆ yMin()