This is a container for configuration of the snapping of the project. More...

#include <qgssnappingconfig.h>

Classes
class	IndividualLayerSettings
	This is a container of advanced configuration (per layer) of the snapping of the project. More...

Public Types
enum	ScaleDependencyMode { Disabled = 0 , Global = 1 , PerLayer = 2 }
	ScaleDependencyMode the scale dependency mode of snapping. More...

enum	SnappingMode { ActiveLayer = 1 , AllLayers = 2 , AdvancedConfiguration = 3 }
	SnappingMode defines on which layer the snapping is performed. More...

enum	SnappingType { Vertex = 1 , VertexAndSegment = 2 , Segment = 3 }
	SnappingType defines on what object the snapping is performed. More...

enum	SnappingTypes { NoSnapFlag = 0 , VertexFlag = 1 , SegmentFlag = 2 , AreaFlag = 4 , CentroidFlag = 8 , MiddleOfSegmentFlag = 16 }
	SnappingTypeFlag defines on what object the snapping is performed. More...

Public Member Functions
	QgsSnappingConfig (QgsProject *project=nullptr)
	Constructor with default parameters defined in global settings. More...

bool	addLayers (const QList< QgsMapLayer * > &layers)
	Adds the specified layers as individual layers to the configuration with standard configuration. More...

void	clearIndividualLayerSettings ()
	Removes all individual layer snapping settings. More...

bool	enabled () const
	Returns if snapping is enabled. More...

QHash< QgsVectorLayer *, QgsSnappingConfig::IndividualLayerSettings >	individualLayerSettings () const
	Returns individual snapping settings for all layers. More...

QgsSnappingConfig::IndividualLayerSettings	individualLayerSettings (QgsVectorLayer *vl) const
	Returns individual layer snappings settings (applied if mode is AdvancedConfiguration) More...

bool	intersectionSnapping () const
	Returns if the snapping on intersection is enabled. More...

double	maximumScale () const
	Returns the max scale (i.e. More...

double	minimumScale () const
	Returns the min scale (i.e. More...

SnappingMode	mode () const
	Returns the mode (all layers, active layer, per layer settings) More...

bool	operator!= (const QgsSnappingConfig &other) const
	Compare this configuration to other. More...

bool	operator== (const QgsSnappingConfig &other) const

QgsProject *	project () const
	The project from which the snapped layers should be retrieved. More...

void	readProject (const QDomDocument &doc)
	Reads the configuration from the specified QGIS project document. More...

bool	removeLayers (const QList< QgsMapLayer * > &layers)
	Removes the specified layers from the individual layer configuration. More...

void	reset ()
	reset to default values More...

ScaleDependencyMode	scaleDependencyMode () const
	Returns the scale dependency mode. More...

bool	selfSnapping () const
	Returns if self snapping (snapping to the currently digitized feature) is enabled. More...

void	setEnabled (bool enabled)
	enables the snapping More...

void	setIndividualLayerSettings (QgsVectorLayer *vl, const QgsSnappingConfig::IndividualLayerSettings &individualLayerSettings)
	Sets individual layer snappings settings (applied if mode is AdvancedConfiguration) More...

void	setIntersectionSnapping (bool enabled)
	Sets if the snapping on intersection is enabled. More...

void	setMaximumScale (double maxScale)
	Set the max scale on which snapping is enabled, 0.0 disable scale limit. More...

void	setMinimumScale (double minScale)
	Sets the min scale on which snapping is enabled, 0.0 disable scale limit. More...

void	setMode (SnappingMode mode)
	define the mode of snapping More...

void	setProject (QgsProject *project)
	The project from which the snapped layers should be retrieved. More...

void	setScaleDependencyMode (ScaleDependencyMode mode)
	Set the scale dependency mode. More...

void	setSelfSnapping (bool enabled)
	Sets if self snapping (snapping to the currently digitized feature) is enabled. More...

void	setTolerance (double tolerance)
	Sets the tolerance. More...

Q_DECL_DEPRECATED void	setType (QgsSnappingConfig::SnappingType type)
	define the type of snapping More...

void	setTypeFlag (QgsSnappingConfig::SnappingTypeFlag type)
	define the type of snapping More...

void	setUnits (QgsTolerance::UnitType units)
	Sets the type of units. More...

double	tolerance () const
	Returns the tolerance. More...

Q_DECL_DEPRECATED QgsSnappingConfig::SnappingType	type () const
	Returns the flags type (vertices \| segments \| area \| centroid \| middle) More...

QgsSnappingConfig::SnappingTypeFlag	typeFlag () const
	Returns the flags type (vertices \| segments \| area \| centroid \| middle) More...

QgsTolerance::UnitType	units () const
	Returns the type of units. More...

void	writeProject (QDomDocument &doc)
	Writes the configuration to the specified QGIS project document. More...

Static Public Member Functions
static const QString	snappingTypeFlagToString (SnappingTypeFlag type)
	Convenient method to returns the translated name of the enum type QgsSnappingConfig::SnappingTypeFlag. More...

Properties
Q_GADGET QgsProject *	project

Detailed Description

This is a container for configuration of the snapping of the project.

Since: QGIS 3.0

Definition at line 33 of file qgssnappingconfig.h.

Member Enumeration Documentation

◆ ScaleDependencyMode

enum QgsSnappingConfig::ScaleDependencyMode

ScaleDependencyMode the scale dependency mode of snapping.

Since: QGIS 3.14

Enumerator
Disabled	No scale dependency.
Global	Scale dependency using global min max range.
PerLayer	Scale dependency using min max range per layer.

Definition at line 87 of file qgssnappingconfig.h.

◆ SnappingMode

enum QgsSnappingConfig::SnappingMode

SnappingMode defines on which layer the snapping is performed.

Enumerator
ActiveLayer	On the active layer.
AllLayers	On all vector layers.
AdvancedConfiguration	On a per layer configuration basis.

Definition at line 44 of file qgssnappingconfig.h.

◆ SnappingType

enum QgsSnappingConfig::SnappingType

SnappingType defines on what object the snapping is performed.

Deprecated:: since QGIS 3.12 use SnappingTypeFlag instead.

Enumerator
Vertex	On vertices only.
VertexAndSegment	Both on vertices and segments.
Segment	On segments only.

Definition at line 56 of file qgssnappingconfig.h.

◆ SnappingTypes

enum QgsSnappingConfig::SnappingTypes

SnappingTypeFlag defines on what object the snapping is performed.

Since: QGIS 3.12

Enumerator
NoSnapFlag	No snapping.
VertexFlag	On vertices.
SegmentFlag	On segments.
AreaFlag	On Area.
CentroidFlag	On centroid.
MiddleOfSegmentFlag	On Middle segment.

Definition at line 70 of file qgssnappingconfig.h.

Constructor & Destructor Documentation

◆ QgsSnappingConfig()

QgsSnappingConfig::QgsSnappingConfig ( QgsProject * project = nullptr )

explicit

Constructor with default parameters defined in global settings.

Definition at line 168 of file qgssnappingconfig.cpp.

Member Function Documentation

◆ addLayers()

bool QgsSnappingConfig::addLayers ( const QList< QgsMapLayer * > & layers )

Adds the specified layers as individual layers to the configuration with standard configuration.

When implementing a long-living QgsSnappingConfig (like the one in QgsProject) it is best to directly feed this with information from the layer registry.

Returns: true if changes have been done.

Since: QGIS 3.0

Definition at line 554 of file qgssnappingconfig.cpp.

◆ clearIndividualLayerSettings()

void QgsSnappingConfig::clearIndividualLayerSettings ( )

Removes all individual layer snapping settings.

Since: QGIS 3.16

Definition at line 377 of file qgssnappingconfig.cpp.

◆ enabled()

bool QgsSnappingConfig::enabled ( ) const

Returns if snapping is enabled.

Definition at line 241 of file qgssnappingconfig.cpp.

◆ individualLayerSettings() [1/2]

QHash< QgsVectorLayer *, QgsSnappingConfig::IndividualLayerSettings > QgsSnappingConfig::individualLayerSettings ( ) const

Returns individual snapping settings for all layers.

Definition at line 359 of file qgssnappingconfig.cpp.

◆ individualLayerSettings() [2/2]

QgsSnappingConfig::IndividualLayerSettings QgsSnappingConfig::individualLayerSettings ( QgsVectorLayer * vl ) const

Returns individual layer snappings settings (applied if mode is AdvancedConfiguration)

Definition at line 364 of file qgssnappingconfig.cpp.

◆ intersectionSnapping()

bool QgsSnappingConfig::intersectionSnapping ( ) const

Returns if the snapping on intersection is enabled.

Definition at line 339 of file qgssnappingconfig.cpp.

◆ maximumScale()

double QgsSnappingConfig::maximumScale ( ) const

Returns the max scale (i.e.

most "zoomed in" scale)

Since: QGIS 3.14

Definition at line 683 of file qgssnappingconfig.cpp.

◆ minimumScale()

double QgsSnappingConfig::minimumScale ( ) const

Returns the min scale (i.e.

most "zoomed out" scale)

Since: QGIS 3.14

Definition at line 673 of file qgssnappingconfig.cpp.

◆ mode()

QgsSnappingConfig::SnappingMode QgsSnappingConfig::mode ( ) const

Returns the mode (all layers, active layer, per layer settings)

Definition at line 255 of file qgssnappingconfig.cpp.

◆ operator!=()

bool QgsSnappingConfig::operator!= ( const QgsSnappingConfig & other ) const

Compare this configuration to other.

Definition at line 391 of file qgssnappingconfig.cpp.

◆ operator==()

bool QgsSnappingConfig::operator== ( const QgsSnappingConfig & other ) const

Definition at line 175 of file qgssnappingconfig.cpp.

◆ project()

QgsProject * QgsSnappingConfig::project ( ) const

The project from which the snapped layers should be retrieved.

Since: QGIS 3.0

Definition at line 660 of file qgssnappingconfig.cpp.

◆ readProject()

void QgsSnappingConfig::readProject ( const QDomDocument & doc )

Reads the configuration from the specified QGIS project document.

Since: QGIS 3.0

Definition at line 404 of file qgssnappingconfig.cpp.

◆ removeLayers()

bool QgsSnappingConfig::removeLayers ( const QList< QgsMapLayer * > & layers )

Removes the specified layers from the individual layer configuration.

When implementing a long-living QgsSnappingConfig (like the one in QgsProject) it is best to directly feed this with information from the layer registry.

Returns: true if changes have been done.

Since: QGIS 3.0

Definition at line 575 of file qgssnappingconfig.cpp.

◆ reset()

void QgsSnappingConfig::reset ( )

reset to default values

Definition at line 190 of file qgssnappingconfig.cpp.

◆ scaleDependencyMode()

QgsSnappingConfig::ScaleDependencyMode QgsSnappingConfig::scaleDependencyMode ( ) const

Returns the scale dependency mode.

Since: QGIS 3.14

Definition at line 698 of file qgssnappingconfig.cpp.

◆ selfSnapping()

bool QgsSnappingConfig::selfSnapping ( ) const

Returns if self snapping (snapping to the currently digitized feature) is enabled.

Since: QGIS 3.14

Definition at line 349 of file qgssnappingconfig.cpp.

◆ setEnabled()

void QgsSnappingConfig::setEnabled ( bool enabled )

enables the snapping

Definition at line 246 of file qgssnappingconfig.cpp.

◆ setIndividualLayerSettings()

void QgsSnappingConfig::setIndividualLayerSettings	(	QgsVectorLayer *	vl,
		const QgsSnappingConfig::IndividualLayerSettings &	individualLayerSettings
	)

Sets individual layer snappings settings (applied if mode is AdvancedConfiguration)

Definition at line 382 of file qgssnappingconfig.cpp.

◆ setIntersectionSnapping()

void QgsSnappingConfig::setIntersectionSnapping ( bool enabled )

Sets if the snapping on intersection is enabled.

Definition at line 344 of file qgssnappingconfig.cpp.

◆ setMaximumScale()

void QgsSnappingConfig::setMaximumScale ( double maxScale )

Set the max scale on which snapping is enabled, 0.0 disable scale limit.

Since: QGIS 3.14

Definition at line 688 of file qgssnappingconfig.cpp.

◆ setMinimumScale()

void QgsSnappingConfig::setMinimumScale ( double minScale )

Sets the min scale on which snapping is enabled, 0.0 disable scale limit.

Since: QGIS 3.14

Definition at line 678 of file qgssnappingconfig.cpp.

◆ setMode()

void QgsSnappingConfig::setMode ( QgsSnappingConfig::SnappingMode mode )

define the mode of snapping

Definition at line 260 of file qgssnappingconfig.cpp.

◆ setProject()

void QgsSnappingConfig::setProject ( QgsProject * project )

The project from which the snapped layers should be retrieved.

Since: QGIS 3.0

Definition at line 665 of file qgssnappingconfig.cpp.

◆ setScaleDependencyMode()

void QgsSnappingConfig::setScaleDependencyMode ( QgsSnappingConfig::ScaleDependencyMode mode )

Set the scale dependency mode.

Since: QGIS 3.14

Definition at line 693 of file qgssnappingconfig.cpp.

◆ setSelfSnapping()

void QgsSnappingConfig::setSelfSnapping ( bool enabled )

Sets if self snapping (snapping to the currently digitized feature) is enabled.

Since: QGIS 3.14

Definition at line 354 of file qgssnappingconfig.cpp.

◆ setTolerance()

void QgsSnappingConfig::setTolerance ( double tolerance )

Sets the tolerance.

Definition at line 316 of file qgssnappingconfig.cpp.

◆ setType()

void QgsSnappingConfig::setType ( QgsSnappingConfig::SnappingType type )

define the type of snapping

Deprecated:: since QGIS 3.12 use setTypeFlag instead.

Definition at line 284 of file qgssnappingconfig.cpp.

◆ setTypeFlag()

void QgsSnappingConfig::setTypeFlag ( QgsSnappingConfig::SnappingTypeFlag type )

define the type of snapping

Since: QGIS 3.12

Definition at line 302 of file qgssnappingconfig.cpp.

◆ setUnits()

void QgsSnappingConfig::setUnits ( QgsTolerance::UnitType units )

Sets the type of units.

Definition at line 330 of file qgssnappingconfig.cpp.

◆ snappingTypeFlagToString()

static const QString QgsSnappingConfig::snappingTypeFlagToString ( SnappingTypeFlag type )

inlinestatic

Convenient method to returns the translated name of the enum type QgsSnappingConfig::SnappingTypeFlag.

Since: QGIS 3.12

Definition at line 101 of file qgssnappingconfig.h.

◆ tolerance()

double QgsSnappingConfig::tolerance ( ) const

Returns the tolerance.

Definition at line 311 of file qgssnappingconfig.cpp.

◆ type()

QgsSnappingConfig::SnappingType QgsSnappingConfig::type ( ) const

Returns the flags type (vertices | segments | area | centroid | middle)

Deprecated:: since QGIS 3.12 use typeFlag instead.

Definition at line 274 of file qgssnappingconfig.cpp.

◆ typeFlag()

QgsSnappingConfig::SnappingTypeFlag QgsSnappingConfig::typeFlag ( ) const

Returns the flags type (vertices | segments | area | centroid | middle)

Since: QGIS 3.12

Definition at line 269 of file qgssnappingconfig.cpp.

◆ units()

QgsTolerance::UnitType QgsSnappingConfig::units ( ) const

Returns the type of units.

Definition at line 325 of file qgssnappingconfig.cpp.

◆ writeProject()

void QgsSnappingConfig::writeProject ( QDomDocument & doc )

Writes the configuration to the specified QGIS project document.

Since: QGIS 3.0

Definition at line 519 of file qgssnappingconfig.cpp.

Property Documentation

◆ project

Q_GADGET QgsProject * QgsSnappingConfig::project

readwrite

Definition at line 35 of file qgssnappingconfig.h.

The documentation for this class was generated from the following files:

/build/qgis-3.18.1+99unstable/src/core/qgssnappingconfig.h
/build/qgis-3.18.1+99unstable/src/core/qgssnappingconfig.cpp

Classes

Public Types

Public Member Functions

Static Public Member Functions

Properties

Detailed Description

Member Enumeration Documentation

◆ ScaleDependencyMode

◆ SnappingMode

◆ SnappingType

◆ SnappingTypes

Constructor & Destructor Documentation

◆ QgsSnappingConfig()

Member Function Documentation

◆ addLayers()

◆ clearIndividualLayerSettings()

◆ enabled()

◆ individualLayerSettings() [1/2]

◆ individualLayerSettings() [2/2]

◆ intersectionSnapping()

◆ maximumScale()

◆ minimumScale()

◆ mode()

◆ operator!=()

◆ operator==()

◆ project()

◆ readProject()

◆ removeLayers()

◆ reset()

◆ scaleDependencyMode()

◆ selfSnapping()

◆ setEnabled()

◆ setIndividualLayerSettings()

◆ setIntersectionSnapping()

◆ setMaximumScale()

◆ setMinimumScale()

◆ setMode()

◆ setProject()

◆ setScaleDependencyMode()

◆ setSelfSnapping()

◆ setTolerance()

◆ setType()

◆ setTypeFlag()

◆ setUnits()

◆ snappingTypeFlagToString()

◆ tolerance()

◆ type()

◆ typeFlag()

◆ units()

◆ writeProject()

Property Documentation

◆ project