QGIS API Documentation  3.14.0-Pi (9f7028fd23)
qgsgeometrysegmentlengthcheck.cpp
Go to the documentation of this file.
1 /***************************************************************************
2  qgsgeometrysegmentlengthcheck.cpp
3  ---------------------
4  begin : September 2015
5  copyright : (C) 2014 by Sandro Mani / Sourcepole AG
6  email : smani at sourcepole dot ch
7  ***************************************************************************
8  * *
9  * This program is free software; you can redistribute it and/or modify *
10  * it under the terms of the GNU General Public License as published by *
11  * the Free Software Foundation; either version 2 of the License, or *
12  * (at your option) any later version. *
13  * *
14  ***************************************************************************/
15 
18 #include "qgsgeometryutils.h"
19 #include "qgsfeaturepool.h"
20 #include "qgsgeometrycheckerror.h"
21 
22 void QgsGeometrySegmentLengthCheck::collectErrors( const QMap<QString, QgsFeaturePool *> &featurePools, QList<QgsGeometryCheckError *> &errors, QStringList &messages, QgsFeedback *feedback, const LayerFeatureIds &ids ) const
23 {
24  Q_UNUSED( messages )
25 
26  QMap<QString, QgsFeatureIds> featureIds = ids.isEmpty() ? allLayerFeatureIds( featurePools ) : ids.toMap();
27  QgsGeometryCheckerUtils::LayerFeatures layerFeatures( featurePools, featureIds, compatibleGeometryTypes(), feedback, mContext );
28  for ( const QgsGeometryCheckerUtils::LayerFeature &layerFeature : layerFeatures )
29  {
30  double layerToMapUnits = scaleFactor( layerFeature.layer() );
31  double minLength = mMinLengthMapUnits / layerToMapUnits;
32 
33  const QgsAbstractGeometry *geom = layerFeature.geometry().constGet();
34  for ( int iPart = 0, nParts = geom->partCount(); iPart < nParts; ++iPart )
35  {
36  for ( int iRing = 0, nRings = geom->ringCount( iPart ); iRing < nRings; ++iRing )
37  {
38  bool isClosed = false;
39  int nVerts = QgsGeometryCheckerUtils::polyLineSize( geom, iPart, iRing, &isClosed );
40  if ( nVerts < 2 )
41  {
42  continue;
43  }
44  for ( int iVert = isClosed ? 0 : 1, jVert = isClosed ? nVerts - 1 : 0; iVert < nVerts; jVert = iVert++ )
45  {
46  QgsPoint pi = geom->vertexAt( QgsVertexId( iPart, iRing, iVert ) );
47  QgsPoint pj = geom->vertexAt( QgsVertexId( iPart, iRing, jVert ) );
48  double dist = pi.distance( pj );
49  // Don't report very small lengths, they are either duplicate nodes or degenerate geometries
50  if ( dist < minLength && dist > mContext->tolerance )
51  {
52  QgsPointXY pos( 0.5 * ( pi.x() + pj.x() ), 0.5 * ( pi.y() + pj.y() ) );
53  errors.append( new QgsGeometryCheckError( this, layerFeature, pos, QgsVertexId( iPart, iRing, iVert ), dist * layerToMapUnits, QgsGeometryCheckError::ValueLength ) );
54  }
55  }
56  }
57  }
58  }
59 }
60 
61 void QgsGeometrySegmentLengthCheck::fixError( const QMap<QString, QgsFeaturePool *> &featurePools, QgsGeometryCheckError *error, int method, const QMap<QString, int> & /*mergeAttributeIndices*/, Changes &/*changes*/ ) const
62 {
63  QgsFeaturePool *featurePool = featurePools[ error->layerId() ];
64  QgsFeature feature;
65  if ( !featurePool->getFeature( error->featureId(), feature ) )
66  {
67  error->setObsolete();
68  return;
69  }
70 
71  QgsGeometry featureGeom = feature.geometry();
72  const QgsAbstractGeometry *geom = featureGeom.constGet();
73  QgsVertexId vidx = error->vidx();
74 
75  // Check if point still exists
76  if ( !vidx.isValid( geom ) )
77  {
78  error->setObsolete();
79  return;
80  }
81 
82  // Check if error still applies
83  int nVerts = QgsGeometryCheckerUtils::polyLineSize( geom, vidx.part, vidx.ring );
84  if ( nVerts == 0 )
85  {
86  error->setObsolete();
87  return;
88  }
89 
90  QgsPoint pi = geom->vertexAt( error->vidx() );
91  QgsPoint pj = geom->vertexAt( QgsVertexId( vidx.part, vidx.ring, ( vidx.vertex - 1 + nVerts ) % nVerts ) );
92  double dist = pi.distance( pj );
93  double layerToMapUnits = scaleFactor( featurePool->layer() );
94  double minLength = mMinLengthMapUnits / layerToMapUnits;
95  if ( dist >= minLength )
96  {
97  error->setObsolete();
98  return;
99  }
100 
101  // Fix error
102  if ( method == NoChange )
103  {
104  error->setFixed( method );
105  }
106  else
107  {
108  error->setFixFailed( tr( "Unknown method" ) );
109  }
110 }
111 
113 {
114  static QStringList methods = QStringList() << tr( "No action" );
115  return methods;
116 }
117 
119 {
121 }
QgsVertexId::part
int part
Definition: qgsabstractgeometry.h:1080
QgsGeometryCheckError::setFixFailed
void setFixFailed(const QString &reason)
Set the error status to failed and specify the reason for failure.
Definition: qgsgeometrycheckerror.cpp:109
qgsgeometrysegmentlengthcheck.h
QgsPoint::distance
double distance(double x, double y) const
Returns the Cartesian 2D distance between this point and a specified x, y coordinate.
Definition: qgspoint.h:350
QgsVertexId::vertex
int vertex
Definition: qgsabstractgeometry.h:1082
QgsVertexId::isValid
bool isValid() const
Returns true if the vertex id is valid.
Definition: qgsabstractgeometry.h:1051
QgsGeometryCheckError::ValueLength
@ ValueLength
The value is a length.
Definition: qgsgeometrycheckerror.h:55
QgsGeometrySegmentLengthCheck::compatibleGeometryTypes
QList< QgsWkbTypes::GeometryType > compatibleGeometryTypes() const override
A list of geometry types for which this check can be performed.
Definition: qgsgeometrysegmentlengthcheck.h:35
QgsPoint
Point geometry type, with support for z-dimension and m-values.
Definition: qgspoint.h:37
QgsGeometryCheckError::setObsolete
void setObsolete()
Set the error status to obsolete.
Definition: qgsgeometrycheckerror.h:166
QgsGeometryCheckError::featureId
QgsFeatureId featureId() const
The id of the feature on which this error has been detected.
Definition: qgsgeometrycheckerror.h:90
QgsGeometryCheck::Changes
QMap< QString, QMap< QgsFeatureId, QList< QgsGeometryCheck::Change > > > Changes
A collection of changes.
Definition: qgsgeometrycheck.h:214
QgsGeometryCheckerUtils::polyLineSize
static int polyLineSize(const QgsAbstractGeometry *geom, int iPart, int iRing, bool *isClosed=nullptr)
Returns the number of points in a polyline, accounting for duplicate start and end point if the polyl...
Definition: qgsgeometrycheckerutils.h:228
QgsGeometryCheck::allLayerFeatureIds
QMap< QString, QgsFeatureIds > allLayerFeatureIds(const QMap< QString, QgsFeaturePool * > &featurePools) const
Returns all layers and feature ids.
Definition: qgsgeometrycheck.cpp:82
QgsGeometryCheck::LayerFeatureIds::isEmpty
bool isEmpty() const
Definition: qgsgeometrycheck.h:118
QgsFeature::geometry
QgsGeometry geometry
Definition: qgsfeature.h:71
QgsGeometryCheck::FeatureNodeCheck
@ FeatureNodeCheck
The check controls individual nodes.
Definition: qgsgeometrycheck.h:157
QgsGeometrySegmentLengthCheck::factoryCheckType
static QgsGeometryCheck::CheckType factoryCheckType()
Definition: qgsgeometrysegmentlengthcheck.cpp:118
QgsAbstractGeometry::partCount
virtual int partCount() const =0
Returns count of parts contained in the geometry.
qgsgeometrycheckerror.h
QgsFeaturePool::getFeature
bool getFeature(QgsFeatureId id, QgsFeature &feature)
Retrieves the feature with the specified id into feature.
Definition: qgsfeaturepool.cpp:39
QgsGeometrySegmentLengthCheck::resolutionMethods
Q_DECL_DEPRECATED QStringList resolutionMethods() const override
Returns a list of descriptions for available resolutions for errors.
Definition: qgsgeometrysegmentlengthcheck.cpp:112
QgsGeometryCheck::LayerFeatureIds::toMap
QMap< QString, QgsFeatureIds > toMap() const
Definition: qgsgeometrycheck.h:113
qgsfeaturepool.h
QgsAbstractGeometry::vertexAt
virtual QgsPoint vertexAt(QgsVertexId id) const =0
Returns the point corresponding to a specified vertex id.
QgsPoint::y
double y
Definition: qgspoint.h:59
QgsGeometrySegmentLengthCheck::collectErrors
void collectErrors(const QMap< QString, QgsFeaturePool * > &featurePools, QList< QgsGeometryCheckError * > &errors, QStringList &messages, QgsFeedback *feedback, const LayerFeatureIds &ids=LayerFeatureIds()) const override
The main worker method.
Definition: qgsgeometrysegmentlengthcheck.cpp:22
qgsgeometrycheckcontext.h
QgsGeometryCheckError::setFixed
void setFixed(int method)
Set the status to fixed and specify the method that has been used to fix the error.
Definition: qgsgeometrycheckerror.cpp:98
QgsGeometryCheck::scaleFactor
double scaleFactor(const QPointer< QgsVectorLayer > &layer) const
Determines the scale factor of a layer to the map coordinate reference system.
Definition: qgsgeometrycheck.cpp:171
QgsFeedback
Definition: qgsfeedback.h:43
QgsGeometrySegmentLengthCheck::fixError
void fixError(const QMap< QString, QgsFeaturePool * > &featurePools, QgsGeometryCheckError *error, int method, const QMap< QString, int > &mergeAttributeIndices, Changes &changes) const override
Fixes the error error with the specified method.
Definition: qgsgeometrysegmentlengthcheck.cpp:61
QgsGeometryCheckerUtils::LayerFeature
Definition: qgsgeometrycheckerutils.h:51
QgsGeometryCheck::LayerFeatureIds
A list of layers and feature ids for each of these layers.
Definition: qgsgeometrycheck.h:105
QgsGeometry::constGet
const QgsAbstractGeometry * constGet() const
Returns a non-modifiable (const) reference to the underlying abstract geometry primitive.
Definition: qgsgeometry.cpp:128
QgsGeometryCheckError::vidx
const QgsVertexId & vidx() const
The id of the affected vertex.
Definition: qgsgeometrycheckerror.h:140
QgsAbstractGeometry
Abstract base class for all geometries.
Definition: qgsabstractgeometry.h:71
qgsgeometryutils.h
QgsGeometryCheck::mContext
const QgsGeometryCheckContext * mContext
Definition: qgsgeometrycheck.h:359
QgsPointXY
Definition: qgspointxy.h:43
QgsFeaturePool::layer
QgsVectorLayer * layer() const
Gets a pointer to the underlying layer.
Definition: qgsfeaturepool.cpp:107
QgsGeometrySegmentLengthCheck::NoChange
@ NoChange
Definition: qgsgeometrysegmentlengthcheck.h:46
QgsGeometry
Definition: qgsgeometry.h:122
QgsGeometryCheckerUtils::LayerFeatures
Definition: qgsgeometrycheckerutils.h:112
QgsGeometryCheck::CheckType
CheckType
The type of a check.
Definition: qgsgeometrycheck.h:155
QgsVertexId
Utility class for identifying a unique vertex within a geometry.
Definition: qgsabstractgeometry.h:1033
QgsGeometryCheckContext::tolerance
const double tolerance
The tolerance to allow for in geometry checks.
Definition: qgsgeometrycheckcontext.h:61
QgsVertexId::ring
int ring
Definition: qgsabstractgeometry.h:1081
QgsFeature
Definition: qgsfeature.h:55
QgsGeometryCheckError::layerId
const QString & layerId() const
The id of the layer on which this error has been detected.
Definition: qgsgeometrycheckerror.h:85
QgsGeometryCheckError
Definition: qgsgeometrycheckerror.h:35
QgsAbstractGeometry::ringCount
virtual int ringCount(int part=0) const =0
Returns the number of rings of which this geometry is built.
QgsPoint::x
double x
Definition: qgspoint.h:58
QgsFeaturePool
Definition: qgsfeaturepool.h:37