#include <qgsmeshlayer.h>

Inheritance diagram for QgsMeshLayer:

Classes
struct	LayerOptions
	Setting options for loading mesh layers. More...

Public Slots
void	setTransformContext (const QgsCoordinateTransformContext &transformContext) override
	Sets the coordinate transform context to transformContext. More...

Public Slots inherited from QgsMapLayer
void	emitStyleChanged ()
	Triggers an emission of the styleChanged() signal. More...

virtual bool	setDependencies (const QSet< QgsMapLayerDependency > &layers)
	Sets the list of dependencies. More...

void	setMaximumScale (double scale)
	Sets the maximum map scale (i.e. More...

void	setMinimumScale (double scale)
	Sets the minimum map scale (i.e. More...

void	setRefreshOnNofifyMessage (const QString &message)
	Set the notification message that triggers repaint If refresh on notification is enabled, the notification will triggerRepaint only if the notification message is equal to. More...

void	setRefreshOnNotifyEnabled (bool enabled)
	Set whether provider notification is connected to triggerRepaint. More...

void	setScaleBasedVisibility (bool enabled)
	Sets whether scale based visibility is enabled for the layer. More...

virtual void	setTransformContext (const QgsCoordinateTransformContext &transformContext)=0
	Sets the coordinate transform context to transformContext. More...

void	triggerRepaint (bool deferredUpdate=false)
	Will advise the map canvas (and any other interested party) that this layer requires to be repainted. More...

Signals
void	activeScalarDatasetGroupChanged (int index)
	Emitted when active scalar group dataset is changed. More...

void	activeVectorDatasetGroupChanged (int index)
	Emitted when active vector group dataset is changed. More...

void	timeSettingsChanged ()
	Emitted when time format is changed. More...

Signals inherited from QgsMapLayer
void	autoRefreshIntervalChanged (int interval)
	Emitted when the auto refresh interval changes. More...

void	beforeResolveReferences (QgsProject *project)
	Emitted when all layers are loaded and references can be resolved, just before the references of this layer are resolved. More...

void	blendModeChanged (QPainter::CompositionMode blendMode)
	Signal emitted when the blend mode is changed, through QgsMapLayer::setBlendMode() More...

void	configChanged ()
	Emitted whenever the configuration is changed. More...

void	crsChanged ()
	Emit a signal that layer's CRS has been reset. More...

void	dataChanged ()
	Data of layer changed. More...

void	dataSourceChanged ()
	Emitted whenever the layer's data source has been changed. More...

void	dependenciesChanged ()
	Emitted when dependencies are changed. More...

void	flagsChanged ()
	Emitted when layer's flags have been modified. More...

void	legendChanged ()
	Signal emitted when legend of the layer has changed. More...

void	metadataChanged ()
	Emitted when the layer's metadata is changed. More...

void	nameChanged ()
	Emitted when the name has been changed. More...

void	recalculateExtents () const
	This is used to send a request that any mapcanvas using this layer update its extents. More...

void	renderer3DChanged ()
	Signal emitted when 3D renderer associated with the layer has changed. More...

void	rendererChanged ()
	Signal emitted when renderer is changed. More...

void	repaintRequested (bool deferredUpdate=false)
	By emitting this signal the layer tells that either appearance or content have been changed and any view showing the rendered layer should refresh itself. More...

void	statusChanged (const QString &status)
	Emit a signal with status (e.g. to be caught by QgisApp and display a msg on status bar) More...

void	styleChanged ()
	Signal emitted whenever a change affects the layer's style. More...

void	styleLoaded (QgsMapLayer::StyleCategories categories)
	Emitted when a style has been loaded. More...

void	willBeDeleted ()
	Emitted in the destructor when the layer is about to be deleted, but it is still in a perfectly valid state: the last chance for other pieces of code for some cleanup if they use the layer. More...

Public Member Functions
	QgsMeshLayer (const QgsMeshLayer &rhs)=delete
	QgsMeshLayer cannot be copied. More...

	QgsMeshLayer (const QString &path=QString(), const QString &baseName=QString(), const QString &providerLib=QStringLiteral("mesh_memory"), const QgsMeshLayer::LayerOptions &options=QgsMeshLayer::LayerOptions())
	Constructor - creates a mesh layer. More...

	~QgsMeshLayer () override

QgsMeshDatasetIndex	activeScalarDatasetAtTime (const QgsDateTimeRange &timeRange) const
	Returns dataset index from active scalar group depending on the time range. More...

QgsMeshDatasetIndex	activeVectorDatasetAtTime (const QgsDateTimeRange &timeRange) const
	Returns dataset index from active vector group depending on the time range If the temporal properties is not active, return the static dataset. More...

bool	addDatasets (const QString &path, const QDateTime &defaultReferenceTime=QDateTime())
	Add datasets to the mesh from file with path. More...

QgsMeshLayer *	clone () const override
	Returns a new instance equivalent to this one except for the id which is still unique. More...

QgsMapLayerRenderer *	createMapRenderer (QgsRenderContext &rendererContext) override
	Returns new instance of QgsMapLayerRenderer that will be used for rendering of given context. More...

const QgsMeshDataProvider *	dataProvider () const override
	Returns the layer's data provider in a const-correct manner, it may be `nullptr`. More...

QgsMeshDataProvider *	dataProvider () override
	Returns the layer's data provider, it may be `nullptr`. More...

QgsMeshDatasetValue	dataset1dValue (const QgsMeshDatasetIndex &index, const QgsPointXY &point, double searchRadius) const
	Returns the value of 1D mesh dataset defined on edge that are in the search area defined by point ans searchRadius. More...

QgsMesh3dDataBlock	dataset3dValue (const QgsMeshDatasetIndex &index, const QgsPointXY &point) const
	Returns the 3d values of stacked 3d mesh defined by the given point. More...

QgsMeshDatasetGroupTreeItem *	datasetGroupTreeRootItem () const
	Returns the root items of the dataset group tree item. More...

QgsMeshDatasetIndex	datasetIndexAtTime (const QgsDateTimeRange &timeRange, int datasetGroupIndex) const
	Returns dataset index from datasets group depending on the time range. More...

QgsMeshDatasetValue	datasetValue (const QgsMeshDatasetIndex &index, const QgsPointXY &point, double searchRadius=0) const
	Interpolates the value on the given point from given dataset. More...

QString	decodedSource (const QString &source, const QString &provider, const QgsReadWriteContext &context) const override
	Called by readLayerXML(), used by derived classes to decode provider's specific data source from project files. More...

QString	encodedSource (const QString &source, const QgsReadWriteContext &context) const override
	Called by writeLayerXML(), used by derived classes to encode provider's specific data source to project files. More...

QgsRectangle	extent () const override
	Returns the extent of the layer. More...

QgsInterval	firstValidTimeStep () const
	Returns the first valid time step of the dataset groups, invalid QgInterval if no time step is present. More...

QString	formatTime (double hours)
	Returns (date) time in hours formatted to human readable form. More...

QgsMeshSimplificationSettings	meshSimplificationSettings () const
	Returns mesh simplification settings. More...

QgsMesh *	nativeMesh ()
	Returns native mesh (`nullptr` before rendering or calling to updateMesh) More...

const QgsMesh *	nativeMesh () const
	Returns native mesh (`nullptr` before rendering or calling to updateMesh) More...

QgsMeshLayer &	operator= (QgsMeshLayer const &rhs)=delete
	QgsMeshLayer cannot be copied. More...

QString	providerType () const
	Returns the provider type for this layer. More...

bool	readStyle (const QDomNode &node, QString &errorMessage, QgsReadWriteContext &context, StyleCategories categories=AllStyleCategories) override
	Read the style for the current layer from the DOM node supplied. More...

bool	readSymbology (const QDomNode &node, QString &errorMessage, QgsReadWriteContext &context, QgsMapLayer::StyleCategories categories=QgsMapLayer::AllStyleCategories) override

bool	readXml (const QDomNode &layer_node, QgsReadWriteContext &context) override
	Called by readLayerXML(), used by children to read state specific to them from project files. More...

void	reload () override
	Synchronises with changes in the datasource. More...

QgsMeshLayerRendererCache *	rendererCache ()
	Returns native mesh (`nullptr` before rendering) More...

QgsMeshRendererSettings	rendererSettings () const
	Returns renderer settings. More...

void	resetDatasetGroupTreeItem ()
	Reset the dataset group tree item to default from provider. More...

void	setDatasetGroupTreeRootItem (QgsMeshDatasetGroupTreeItem *rootItem)
	Sets the root items of the dataset group tree item. More...

void	setMeshSimplificationSettings (const QgsMeshSimplificationSettings &meshSimplificationSettings)
	Sets mesh simplification settings. More...

void	setReferenceTime (const QDateTime &referenceTime)
	Sets the reference time of the layer. More...

void	setRendererSettings (const QgsMeshRendererSettings &settings)
	Sets new renderer settings. More...

void	setStaticScalarDatasetIndex (const QgsMeshDatasetIndex &staticScalarDatasetIndex)
	Sets the static scalar dataset index that is rendered if the temporal properties is not active. More...

void	setStaticVectorDatasetIndex (const QgsMeshDatasetIndex &staticVectorDatasetIndex)
	Sets the static vector dataset index that is rendered if the temporal properties is not active. More...

void	setTemporalMatchingMethod (const QgsMeshDataProviderTemporalCapabilities::MatchingTemporalDatasetMethod &matchingMethod)
	Sets the method used to match the temporal dataset from a requested time, see activeVectorDatasetAtTime() More...

void	setTimeSettings (const QgsMeshTimeSettings &settings)
	Sets time format settings. More...

QgsPointXY	snapOnElement (QgsMesh::ElementType elementType, const QgsPointXY &point, double searchRadius)
	Returns the position of the snapped point on the mesh element closest to point intersecting with the searching area defined by point and searchRadius. More...

QgsMeshDatasetIndex	staticScalarDatasetIndex () const
	Returns the static scalar dataset index that is rendered if the temporal properties is not active. More...

QgsMeshDatasetIndex	staticVectorDatasetIndex () const
	Returns the static vector dataset index that is rendered if the temporal properties is not active. More...

QStringList	subLayers () const override
	Returns the sublayers of this layer. More...

QgsMapLayerTemporalProperties *	temporalProperties () override
	Returns the layer's temporal properties. More...

QgsMeshTimeSettings	timeSettings () const
	Returns time format settings. More...

QgsTriangularMesh *	triangularMesh (double minimumTriangleSize=0) const
	Returns triangular mesh (`nullptr` before rendering or calling to updateMesh). More...

void	updateTriangularMesh (const QgsCoordinateTransform &transform=QgsCoordinateTransform())
	Gets native mesh and updates (creates if it doesn't exist) the base triangular mesh. More...

bool	writeStyle (QDomNode &node, QDomDocument &doc, QString &errorMessage, const QgsReadWriteContext &context, StyleCategories categories=AllStyleCategories) const override
	Write just the symbology information for the layer into the document. More...

bool	writeSymbology (QDomNode &node, QDomDocument &doc, QString &errorMessage, const QgsReadWriteContext &context, QgsMapLayer::StyleCategories categories=QgsMapLayer::AllStyleCategories) const override

bool	writeXml (QDomNode &layer_node, QDomDocument &doc, const QgsReadWriteContext &context) const override
	Called by writeLayerXML(), used by children to write state specific to them to project files. More...

Public Member Functions inherited from QgsMapLayer
	QgsMapLayer (QgsMapLayer const &)=delete
	QgsMapLayer cannot be copied. More...

	QgsMapLayer (QgsMapLayerType type=QgsMapLayerType::VectorLayer, const QString &name=QString(), const QString &source=QString())
	Constructor for QgsMapLayer. More...

	~QgsMapLayer () override

QString	abstract () const
	Returns the abstract of the layer used by QGIS Server in GetCapabilities request. More...

virtual bool	accept (QgsStyleEntityVisitorInterface *visitor) const
	Accepts the specified symbology visitor, causing it to visit all symbols associated with the layer. More...

QString	attribution () const
	Returns the attribution of the layer used by QGIS Server in GetCapabilities request. More...

QString	attributionUrl () const
	Returns the attribution URL of the layer used by QGIS Server in GetCapabilities request. More...

int	autoRefreshInterval () const
	Returns the auto refresh interval (in milliseconds). More...

QPainter::CompositionMode	blendMode () const
	Returns the current blending mode for a layer. More...

QgsCoordinateReferenceSystem	crs () const
	Returns the layer's spatial reference system. More...

const QgsObjectCustomProperties &	customProperties () const
	Read all custom properties from layer. More...

Q_INVOKABLE QVariant	customProperty (const QString &value, const QVariant &defaultValue=QVariant()) const
	Read a custom property from layer. More...

Q_INVOKABLE QStringList	customPropertyKeys () const
	Returns list of all keys within custom properties. More...

QString	dataUrl () const
	Returns the DataUrl of the layer used by QGIS Server in GetCapabilities request. More...

QString	dataUrlFormat () const
	Returns the DataUrl format of the layer used by QGIS Server in GetCapabilities request. More...

virtual QSet< QgsMapLayerDependency >	dependencies () const
	Gets the list of dependencies. More...

virtual QgsError	error () const
	Gets current status error. More...

void	exportNamedMetadata (QDomDocument &doc, QString &errorMsg) const
	Export the current metadata of this layer as named metadata in a QDomDocument. More...

virtual void	exportNamedStyle (QDomDocument &doc, QString &errorMsg, const QgsReadWriteContext &context=QgsReadWriteContext(), QgsMapLayer::StyleCategories categories=QgsMapLayer::AllStyleCategories) const
	Export the properties of this layer as named style in a QDomDocument. More...

virtual void	exportSldStyle (QDomDocument &doc, QString &errorMsg) const
	Export the properties of this layer as SLD style in a QDomDocument. More...

QgsMapLayer::LayerFlags	flags () const
	Returns the flags for this layer. More...

bool	hasAutoRefreshEnabled () const
	Returns `true` if auto refresh is enabled for the layer. More...

bool	hasScaleBasedVisibility () const
	Returns whether scale based visibility is enabled for the layer. More...

virtual QString	htmlMetadata () const
	Obtain a formatted HTML string containing assorted metadata for this layer. More...

QString	id () const
	Returns the layer's unique ID, which is used to access this layer from QgsProject. More...

bool	importNamedMetadata (QDomDocument &document, QString &errorMessage)
	Import the metadata of this layer from a QDomDocument. More...

virtual bool	importNamedStyle (QDomDocument &doc, QString &errorMsg, QgsMapLayer::StyleCategories categories=QgsMapLayer::AllStyleCategories)
	Import the properties of this layer from a QDomDocument. More...

virtual bool	isEditable () const
	Returns `true` if the layer can be edited. More...

bool	isInScaleRange (double scale) const
	Tests whether the layer should be visible at the specified scale. More...

bool	isRefreshOnNotifyEnabled () const
	Returns `true` if the refresh on provider nofification is enabled. More...

virtual bool	isSpatial () const
	Returns `true` if the layer is considered a spatial layer, ie it has some form of geometry associated with it. More...

virtual bool	isTemporary () const
	Returns `true` if the layer is considered a temporary layer. More...

bool	isValid () const
	Returns the status of the layer. More...

QString	keywordList () const
	Returns the keyword list of the layer used by QGIS Server in GetCapabilities request. More...

QgsMapLayerLegend *	legend () const
	Can be `nullptr`. More...

QString	legendUrl () const
	Returns the URL for the layer's legend. More...

QString	legendUrlFormat () const
	Returns the format for a URL based layer legend. More...

QString	loadDefaultMetadata (bool &resultFlag)
	Retrieve the default metadata for this layer if one exists (either as a .qmd file on disk or as a record in the users metadata table in their personal qgis.db) More...

virtual QString	loadDefaultStyle (bool &resultFlag)
	Retrieve the default style for this layer if one exists (either as a .qml file on disk or as a record in the users style table in their personal qgis.db) More...

virtual QString	loadNamedMetadata (const QString &uri, bool &resultFlag)
	Retrieve a named metadata for this layer if one exists (either as a .qmd file on disk or as a record in the users style table in their personal qgis.db) More...

bool	loadNamedMetadataFromDatabase (const QString &db, const QString &uri, QString &qmd)
	Retrieve a named metadata for this layer from a sqlite database. More...

virtual QString	loadNamedStyle (const QString &uri, bool &resultFlag, QgsMapLayer::StyleCategories categories=QgsMapLayer::AllStyleCategories)
	Retrieve a named style for this layer if one exists (either as a .qml file on disk or as a record in the users style table in their personal qgis.db) More...

virtual bool	loadNamedStyleFromDatabase (const QString &db, const QString &uri, QString &qml)
	Retrieve a named style for this layer from a sqlite database. More...

virtual QString	loadSldStyle (const QString &uri, bool &resultFlag)
	Attempts to style the layer using the formatting from an SLD type file. More...

double	maximumScale () const
	Returns the maximum map scale (i.e. More...

virtual const QgsLayerMetadata &	metadata () const
	Returns a reference to the layer's metadata store. More...

virtual QString	metadataUri () const
	Retrieve the metadata URI for this layer (either as a .qmd file on disk or as a record in the users style table in their personal qgis.db) More...

QString	metadataUrl () const
	Returns the metadata URL of the layer used by QGIS Server in GetCapabilities request. More...

QString	metadataUrlFormat () const
	Returns the metadata format of the layer used by QGIS Server in GetCapabilities request. More...

QString	metadataUrlType () const
	Returns the metadata type of the layer used by QGIS Server in GetCapabilities request. More...

double	minimumScale () const
	Returns the minimum map scale (i.e. More...

QString	name () const
	Returns the display name of the layer. More...

QgsMapLayer &	operator= (QgsMapLayer const &)=delete
	QgsMapLayer cannot be copied. More...

QString	originalXmlProperties () const
	Returns the XML properties of the original layer as they were when the layer was first read from the project file. More...

QString	providerType () const
	Returns the provider type (provider key) for this layer. More...

QString	publicSource () const
	Gets a version of the internal layer definition that has sensitive bits removed (for example, the password). More...

bool	readLayerXml (const QDomElement &layerElement, QgsReadWriteContext &context, QgsMapLayer::ReadFlags flags=QgsMapLayer::ReadFlags())
	Sets state from DOM document. More...

bool	readOnly () const
	Returns if this layer is read only. More...

virtual bool	readSld (const QDomNode &node, QString &errorMessage)

virtual bool	readSymbology (const QDomNode &node, QString &errorMessage, QgsReadWriteContext &context, StyleCategories categories=AllStyleCategories)=0
	Read the symbology for the current layer from the DOM node supplied. More...

QString	refreshOnNotifyMessage () const
	Returns the message that should be notified by the provider to triggerRepaint. More...

void	removeCustomProperty (const QString &key)
	Remove a custom property from layer. More...

QgsAbstract3DRenderer *	renderer3D () const
	Returns 3D renderer associated with the layer. More...

virtual void	resolveReferences (QgsProject *project)
	Resolve references to other layers (kept as layer IDs after reading XML) into layer objects. More...

virtual QString	saveDefaultMetadata (bool &resultFlag)
	Save the current metadata of this layer as the default metadata (either as a .qmd file on disk or as a record in the users style table in their personal qgis.db) More...

virtual QString	saveDefaultStyle (bool &resultFlag)
	Save the properties of this layer as the default style (either as a .qml file on disk or as a record in the users style table in their personal qgis.db) More...

QString	saveNamedMetadata (const QString &uri, bool &resultFlag)
	Save the current metadata of this layer as a named metadata (either as a .qmd file on disk or as a record in the users style table in their personal qgis.db) More...

virtual QString	saveNamedStyle (const QString &uri, bool &resultFlag, StyleCategories categories=AllStyleCategories)
	Save the properties of this layer as a named style (either as a .qml file on disk or as a record in the users style table in their personal qgis.db) More...

virtual QString	saveSldStyle (const QString &uri, bool &resultFlag) const
	Saves the properties of this layer to an SLD format file. More...

void	setAbstract (const QString &abstract)
	Sets the abstract of the layer used by QGIS Server in GetCapabilities request. More...

void	setAttribution (const QString &attrib)
	Sets the attribution of the layer used by QGIS Server in GetCapabilities request. More...

void	setAttributionUrl (const QString &attribUrl)
	Sets the attribution URL of the layer used by QGIS Server in GetCapabilities request. More...

void	setAutoRefreshEnabled (bool enabled)
	Sets whether auto refresh is enabled for the layer. More...

void	setAutoRefreshInterval (int interval)
	Sets the auto refresh interval (in milliseconds) for the layer. More...

void	setBlendMode (QPainter::CompositionMode blendMode)
	Set the blending mode used for rendering a layer. More...

void	setCrs (const QgsCoordinateReferenceSystem &srs, bool emitSignal=true)
	Sets layer's spatial reference system. More...

void	setCustomProperties (const QgsObjectCustomProperties &properties)
	Set custom properties for layer. More...

Q_INVOKABLE void	setCustomProperty (const QString &key, const QVariant &value)
	Set a custom property for layer. More...

virtual void	setDataSource (const QString &dataSource, const QString &baseName, const QString &provider, const QgsDataProvider::ProviderOptions &options, bool loadDefaultStyleFlag=false)
	Updates the data source of the layer. More...

void	setDataUrl (const QString &dataUrl)
	Sets the DataUrl of the layer used by QGIS Server in GetCapabilities request. More...

void	setDataUrlFormat (const QString &dataUrlFormat)
	Sets the DataUrl format of the layer used by QGIS Server in GetCapabilities request. More...

void	setFlags (QgsMapLayer::LayerFlags flags)
	Returns the flags for this layer. More...

void	setKeywordList (const QString &keywords)
	Sets the keyword list of the layer used by QGIS Server in GetCapabilities request. More...

virtual void	setLayerOrder (const QStringList &layers)
	Reorders the previously selected sublayers of this layer from bottom to top. More...

void	setLegend (QgsMapLayerLegend *legend)
	Assign a legend controller to the map layer. More...

void	setLegendUrl (const QString &legendUrl)
	Sets the URL for the layer's legend. More...

void	setLegendUrlFormat (const QString &legendUrlFormat)
	Sets the format for a URL based layer legend. More...

virtual void	setMetadata (const QgsLayerMetadata &metadata)
	Sets the layer's metadata store. More...

void	setMetadataUrl (const QString &metaUrl)
	Sets the metadata URL of the layer used by QGIS Server in GetCapabilities request. More...

void	setMetadataUrlFormat (const QString &metaUrlFormat)
	Sets the metadata format of the layer used by QGIS Server in GetCapabilities request. More...

void	setMetadataUrlType (const QString &metaUrlType)
	Set the metadata type of the layer used by QGIS Server in GetCapabilities request MetadataUrlType indicates the standard to which the metadata complies. More...

void	setName (const QString &name)
	Set the display name of the layer. More...

void	setOriginalXmlProperties (const QString &originalXmlProperties)
	Sets the original XML properties for the layer to originalXmlProperties. More...

void	setRenderer3D (QgsAbstract3DRenderer *renderer)
	Sets 3D renderer for the layer. More...

void	setShortName (const QString &shortName)
	Sets the short name of the layer used by QGIS Server to identify the layer. More...

virtual void	setSubLayerVisibility (const QString &name, bool visible)
	Set the visibility of the given sublayer name. More...

void	setTitle (const QString &title)
	Sets the title of the layer used by QGIS Server in GetCapabilities request. More...

QString	shortName () const
	Returns the short name of the layer used by QGIS Server to identify the layer. More...

QString	source () const
	Returns the source for the layer. More...

QgsMapLayerStyleManager *	styleManager () const
	Gets access to the layer's style manager. More...

virtual QString	styleURI () const
	Retrieve the style URI for this layer (either as a .qml file on disk or as a record in the users style table in their personal qgis.db) More...

virtual QDateTime	timestamp () const
	Time stamp of data source in the moment when data/metadata were loaded by provider. More...

QString	title () const
	Returns the title of the layer used by QGIS Server in GetCapabilities request. More...

QgsCoordinateTransformContext	transformContext () const
	Returns the layer data provider coordinate transform context or a default transform context if the layer does not have a valid data provider. More...

QgsMapLayerType	type () const
	Returns the type of the layer. More...

QUndoStack *	undoStack ()
	Returns pointer to layer's undo stack. More...

QUndoStack *	undoStackStyles ()
	Returns pointer to layer's style undo stack. More...

bool	writeLayerXml (QDomElement &layerElement, QDomDocument &document, const QgsReadWriteContext &context) const
	Stores state in DOM node. More...

virtual bool	writeSymbology (QDomNode &node, QDomDocument &doc, QString &errorMessage, const QgsReadWriteContext &context, StyleCategories categories=AllStyleCategories) const =0
	Write the style for the layer into the docment provided. More...

Additional Inherited Members
Public Types inherited from QgsMapLayer
enum	LayerFlag { Identifiable = 1 << 0, Removable = 1 << 1, Searchable = 1 << 2 }
	Flags for the map layer. More...

enum	PropertyType { Style = 0, Metadata }
	Maplayer has a style and a metadata property. More...

enum	ReadFlag { FlagDontResolveLayers = 1 << 0 }
	Flags which control project read behavior. More...

enum	StyleCategory { LayerConfiguration = 1 << 0, Symbology = 1 << 1, Symbology3D = 1 << 2, Labeling = 1 << 3, Fields = 1 << 4, Forms = 1 << 5, Actions = 1 << 6, MapTips = 1 << 7, Diagrams = 1 << 8, AttributeTable = 1 << 9, Rendering = 1 << 10, CustomProperties = 1 << 11, GeometryOptions = 1 << 12, Relations = 1 << 13, Temporal = 1 << 14, AllStyleCategories }
	Categories of style to distinguish appropriate sections for import/export. More...

Static Public Member Functions inherited from QgsMapLayer
static QString	extensionPropertyType (PropertyType type)
	Returns the extension of a Property. More...

static QString	formatLayerName (const QString &name)
	A convenience function to capitalize and format a layer name. More...

static QString	generateId (const QString &layerName)
	Generates an unique identifier for this layer, the generate ID is prefixed by layerName. More...

Protected Member Functions inherited from QgsMapLayer
void	appendError (const QgsErrorMessage &error)
	Add error message. More...

void	clone (QgsMapLayer *layer) const
	Copies attributes like name, short name, ... More...

Q_DECL_DEPRECATED bool	hasDependencyCycle (const QSet< QgsMapLayerDependency > &) const
	Checks whether a new set of dependencies will introduce a cycle this method is now deprecated and always return false, because circular dependencies are now correctly managed. More...

void	readCommonStyle (const QDomElement &layerElement, const QgsReadWriteContext &context, StyleCategories categories=AllStyleCategories)
	Read style data common to all layer types. More...

void	readCustomProperties (const QDomNode &layerNode, const QString &keyStartsWith=QString())
	Read custom properties from project file. More...

void	readStyleManager (const QDomNode &layerNode)
	Read style manager's configuration (if any). To be called by subclasses. More...

void	setError (const QgsError &error)
	Sets error message. More...

virtual void	setExtent (const QgsRectangle &rect)
	Sets the extent. More...

void	setProviderType (const QString &providerType)
	Sets the providerType (provider key) More...

void	setValid (bool valid)
	Sets whether layer is valid or not - should be used in constructor. More...

void	writeCommonStyle (QDomElement &layerElement, QDomDocument &document, const QgsReadWriteContext &context, StyleCategories categories=AllStyleCategories) const
	Write style data common to all layer types. More...

void	writeCustomProperties (QDomNode &layerNode, QDomDocument &doc) const
	Write custom properties to project file. More...

void	writeStyleManager (QDomNode &layerNode, QDomDocument &doc) const
	Write style manager's configuration (if exists). To be called by subclasses. More...

Protected Attributes inherited from QgsMapLayer
QString	mAbstract
	Description of the layer. More...

QString	mAttribution
	Attribution of the layer. More...

QString	mAttributionUrl

QString	mDataSource
	Data source description string, varies by layer type. More...

QString	mDataUrl
	DataUrl of the layer. More...

QString	mDataUrlFormat

QSet< QgsMapLayerDependency >	mDependencies
	List of layers that may modify this layer on modification. More...

QgsError	mError
	Error. More...

QgsRectangle	mExtent
	Extent of the layer. More...

bool	mIsRefreshOnNofifyEnabled = false

QString	mKeywordList

QString	mLayerName
	Name of the layer - used for display. More...

QString	mLegendUrl
	WMS legend. More...

QString	mLegendUrlFormat

QString	mMetadataUrl
	MetadataUrl of the layer. More...

QString	mMetadataUrlFormat

QString	mMetadataUrlType

QString	mProviderKey
	Data provider key (name of the data provider) More...

QgsMapLayer::ReadFlags	mReadFlags = QgsMapLayer::ReadFlags()
	Read flags. It's up to the subclass to respect these when restoring state from XML. More...

QString	mRefreshOnNofifyMessage

QString	mShortName

bool	mShouldValidateCrs = true
	`true` if the layer's CRS should be validated and invalid CRSes are not permitted. More...

QString	mTitle

bool	mValid = false
	Indicates if the layer is valid and can be drawn. More...

Properties inherited from QgsMapLayer
int	autoRefreshInterval

QgsCoordinateReferenceSystem	crs

QgsLayerMetadata	metadata

QString	name

Detailed Description

Represents a mesh layer supporting display of data on structured or unstructured meshes

The QgsMeshLayer is instantiated by specifying the name of a data provider, such as mdal, and url defining the specific data set to connect to. The vector layer constructor in turn instantiates a QgsMeshDataProvider subclass corresponding to the provider type, and passes it the url. The data provider connects to the data source.

The QgsMeshLayer provides a common interface to the different data types. It does not yet support editing transactions.

The main data providers supported by QGIS are listed below.

Mesh data providers

Memory data providerType (mesh_memory)

The memory data provider is used to construct in memory data, for example scratch data. There is no inherent persistent storage of the data. The data source uri is constructed. Data can be populated by setMesh(const QString &vertices, const QString &faces), where vertices and faces is comma separated coordinates and connections for mesh. E.g. to create mesh with one quad and one triangle

QString uri(
    "1.0, 2.0 \n" \
    "2.0, 2.0 \n" \
    "3.0, 2.0 \n" \
    "2.0, 3.0 \n" \
    "1.0, 3.0 \n" \
    "---" \
    "0, 1, 3, 4 \n" \
    "1, 2, 3 \n"
  );
  QgsMeshLayer *scratchLayer = new QgsMeshLayer(uri, "My Scratch layer", "mesh_memory");

MDAL data provider (mdal)

Accesses data using the MDAL drivers (https://github.com/lutraconsulting/MDAL). The url is the MDAL connection string. QGIS must be built with MDAL support to allow this provider.

QString uri = "test/land.2dm";

QgsMeshLayer *scratchLayer = new QgsMeshLayer(uri, "My Scratch Layer", "mdal");

Note: The API is considered EXPERIMENTAL and can be changed without a notice

Since: QGIS 3.2

Definition at line 94 of file qgsmeshlayer.h.

Constructor & Destructor Documentation

◆ QgsMeshLayer() [1/2]

QgsMeshLayer::QgsMeshLayer	(	const QString &	path = `QString()`,
		const QString &	baseName = `QString()`,
		const QString &	providerLib = `QStringLiteral( "mesh_memory" )`,
		const QgsMeshLayer::LayerOptions &	options = `QgsMeshLayer::LayerOptions()`
	)

explicit

Constructor - creates a mesh layer.

The QgsMeshLayer is constructed by instantiating a data provider. The provider interprets the supplied path (url) of the data source to connect to and access the data.

Parameters

path	The path or url of the parameter. Typically this encodes parameters used by the data provider as url query items.
baseName	The name used to represent the layer in the legend
providerLib	The name of the data provider, e.g., "mesh_memory", "mdal"
options	general mesh layer options

Definition at line 39 of file qgsmeshlayer.cpp.

◆ ~QgsMeshLayer()

QgsMeshLayer::~QgsMeshLayer ( )

override

Definition at line 142 of file qgsmeshlayer.cpp.

◆ QgsMeshLayer() [2/2]

QgsMeshLayer::QgsMeshLayer ( const QgsMeshLayer & rhs )

delete

QgsMeshLayer cannot be copied.

Member Function Documentation

◆ activeScalarDatasetAtTime()

QgsMeshDatasetIndex QgsMeshLayer::activeScalarDatasetAtTime ( const QgsDateTimeRange & timeRange ) const

Returns dataset index from active scalar group depending on the time range.

If the temporal properties is not active, return the static dataset

Parameters

timeRange the time range

Returns: dataset index

Note: the returned dataset index depends on the matching method, see setTemporalMatchingMethod()

Since: QGIS 3.14

Definition at line 546 of file qgsmeshlayer.cpp.

◆ activeScalarDatasetGroupChanged

void QgsMeshLayer::activeScalarDatasetGroupChanged ( int index )

signal

Emitted when active scalar group dataset is changed.

Since: QGIS 3.14

◆ activeVectorDatasetAtTime()

QgsMeshDatasetIndex QgsMeshLayer::activeVectorDatasetAtTime ( const QgsDateTimeRange & timeRange ) const

Returns dataset index from active vector group depending on the time range If the temporal properties is not active, return the static dataset.

Parameters

timeRange the time range

Returns: dataset index

Note: the returned dataset index depends on the matching method, see setTemporalMatchingMethod()

Since: QGIS 3.14

Definition at line 554 of file qgsmeshlayer.cpp.

◆ activeVectorDatasetGroupChanged

void QgsMeshLayer::activeVectorDatasetGroupChanged ( int index )

signal

Emitted when active vector group dataset is changed.

Since: QGIS 3.14

◆ addDatasets()

bool QgsMeshLayer::addDatasets	(	const QString &	path,
		const QDateTime &	defaultReferenceTime = `QDateTime()`
	)

Add datasets to the mesh from file with path.

Use the the time defaultReferenceTime as reference time is not provided in the file

Parameters

path	the path to the atasets file
defaultReferenceTime	reference time used if not provided in the file

Returns: whether the dataset is added

Since: QGIS 3.14

Definition at line 186 of file qgsmeshlayer.cpp.

◆ clone()

QgsMeshLayer * QgsMeshLayer::clone ( ) const

overridevirtual

Returns a new instance equivalent to this one except for the id which is still unique.

Returns: a new layer instance

Since: QGIS 3.0

Implements QgsMapLayer.

Definition at line 157 of file qgsmeshlayer.cpp.

◆ createMapRenderer()

QgsMapLayerRenderer * QgsMeshLayer::createMapRenderer ( QgsRenderContext & rendererContext )

overridevirtual

Returns new instance of QgsMapLayerRenderer that will be used for rendering of given context.

Since: QGIS 2.4

Implements QgsMapLayer.

Definition at line 914 of file qgsmeshlayer.cpp.

◆ dataProvider() [1/2]

const QgsMeshDataProvider* QgsMeshLayer::dataProvider ( ) const

overridevirtual

Returns the layer's data provider in a const-correct manner, it may be nullptr.

Note: not available in Python bindings

Reimplemented from QgsMapLayer.

◆ dataProvider() [2/2]

const QgsMeshDataProvider * QgsMeshLayer::dataProvider ( )

overridevirtual

Returns the layer's data provider, it may be nullptr.

Reimplemented from QgsMapLayer.

Definition at line 147 of file qgsmeshlayer.cpp.

◆ dataset1dValue()

QgsMeshDatasetValue QgsMeshLayer::dataset1dValue	(	const QgsMeshDatasetIndex &	index,
		const QgsPointXY &	point,
		double	searchRadius
	)		const

Returns the value of 1D mesh dataset defined on edge that are in the search area defined by point ans searchRadius.

Note: It uses previously cached and indexed triangular mesh and so if the layer has not been rendered previously (e.g. when used in a script) it returns NaN value

See also: updateTriangularMesh

Parameters

index	dataset index specifying group and dataset to extract value from
point	the center point of the search area
searchRadius	the radius of the searc area in map unit

Returns: interpolated value at the projected point. Returns NaN values for values outside the mesh layer and in case triangular mesh was not previously used for rendering

Since: QGIS 3.14

Definition at line 395 of file qgsmeshlayer.cpp.

◆ dataset3dValue()

QgsMesh3dDataBlock QgsMeshLayer::dataset3dValue	(	const QgsMeshDatasetIndex &	index,
		const QgsPointXY &	point
	)		const

Returns the 3d values of stacked 3d mesh defined by the given point.

Note: It uses previously cached and indexed triangular mesh and so if the layer has not been rendered previously (e.g. when used in a script) it returns NaN value

See also: updateTriangularMesh

Parameters

index	dataset index specifying group and dataset to extract value from
point	point to query in map coordinates

Returns: all 3d stacked values that belong to face defined by given point. Returns invalid block for point outside the mesh layer or in case triangular mesh was not previously used for rendering or for datasets that do not have type DataOnVolumes

Since: QGIS 3.12

Definition at line 373 of file qgsmeshlayer.cpp.

◆ datasetGroupTreeRootItem()

QgsMeshDatasetGroupTreeItem * QgsMeshLayer::datasetGroupTreeRootItem ( ) const

Returns the root items of the dataset group tree item.

Returns: the root item

Since: QGIS 3.14

Definition at line 593 of file qgsmeshlayer.cpp.

◆ datasetIndexAtTime()

QgsMeshDatasetIndex QgsMeshLayer::datasetIndexAtTime	(	const QgsDateTimeRange &	timeRange,
		int	datasetGroupIndex
	)		const

Returns dataset index from datasets group depending on the time range.

If the temporal properties is not active, returns invalid dataset index

Parameters

timeRange the time range

Returns: dataset index

Note: the returned dataset index depends on the matching method, see setTemporalMatchingMethod()

Since: QGIS 3.14

Definition at line 438 of file qgsmeshlayer.cpp.

◆ datasetValue()

QgsMeshDatasetValue QgsMeshLayer::datasetValue	(	const QgsMeshDatasetIndex &	index,
		const QgsPointXY &	point,
		double	searchRadius = `0`
	)		const

Interpolates the value on the given point from given dataset.

For 3D datasets, it uses dataset3dValue(),
For 1D datasets, it uses dataset1dValue() with searchRadius

Note: It uses previously cached and indexed triangular mesh and so if the layer has not been rendered previously (e.g. when used in a script) it returns NaN value

See also: updateTriangularMesh

Parameters

index	dataset index specifying group and dataset to extract value from
point	point to query in map coordinates
searchRadius	the radius of the search area in map unit

Returns: interpolated value at the point. Returns NaN values for values outside the mesh layer, nodata values and in case triangular mesh was not previously used for rendering

Since: QGIS 3.4

Definition at line 303 of file qgsmeshlayer.cpp.

◆ decodedSource()

QString QgsMeshLayer::decodedSource	(	const QString &	source,
		const QString &	dataProvider,
		const QgsReadWriteContext &	context
	)		const

overridevirtual

Called by readLayerXML(), used by derived classes to decode provider's specific data source from project files.

Typically resolving absolute or relative paths, usernames and passwords or drivers prefixes ("HDF5:")

Parameters

source	data source to decode, typically read from layer's DOM element "datasource"
dataProvider	string identification of data provider (e.g. "ogr"), typically read from layer's DOM element
context	reading context (e.g. for conversion between relative and absolute paths)

Returns: decoded source, typically to be used as the layer's datasource

Since: QGIS 3.2

Reimplemented from QgsMapLayer.

Definition at line 993 of file qgsmeshlayer.cpp.

◆ encodedSource()

QString QgsMeshLayer::encodedSource	(	const QString &	source,
		const QgsReadWriteContext &	context
	)		const

overridevirtual

Called by writeLayerXML(), used by derived classes to encode provider's specific data source to project files.

Typically resolving absolute or relative paths, usernames and passwords or drivers prefixes ("HDF5:")

Parameters

source	data source to encode, typically QgsMapLayer::source()
context	writing context (e.g. for conversion between relative and absolute paths)

Returns: encoded source, typically to be written in the DOM element "datasource"

Since: QGIS 3.2

Reimplemented from QgsMapLayer.

Definition at line 1003 of file qgsmeshlayer.cpp.

◆ extent()

QgsRectangle QgsMeshLayer::extent ( ) const

overridevirtual

Returns the extent of the layer.

Reimplemented from QgsMapLayer.

Definition at line 169 of file qgsmeshlayer.cpp.

◆ firstValidTimeStep()

QgsInterval QgsMeshLayer::firstValidTimeStep ( ) const

Returns the first valid time step of the dataset groups, invalid QgInterval if no time step is present.

Since: QGIS 3.14

Definition at line 750 of file qgsmeshlayer.cpp.

◆ formatTime()

QString QgsMeshLayer::formatTime ( double hours )

Returns (date) time in hours formatted to human readable form.

Parameters

hours time in double in hours

Returns: formatted time string

Since: QGIS 3.8

Definition at line 295 of file qgsmeshlayer.cpp.

◆ meshSimplificationSettings()

QgsMeshSimplificationSettings QgsMeshLayer::meshSimplificationSettings ( ) const

Returns mesh simplification settings.

Since: QGIS 3.14

Definition at line 852 of file qgsmeshlayer.cpp.

◆ nativeMesh() [1/2]

const QgsMesh * QgsMeshLayer::nativeMesh ( )

Returns native mesh (nullptr before rendering or calling to updateMesh)

Note: Not available in Python bindings

Definition at line 214 of file qgsmeshlayer.cpp.

◆ nativeMesh() [2/2]

const QgsMesh* QgsMeshLayer::nativeMesh ( ) const

Returns native mesh (nullptr before rendering or calling to updateMesh)

Note: Not available in Python bindings

◆ operator=()

QgsMeshLayer& QgsMeshLayer::operator= ( QgsMeshLayer const & rhs )

delete

QgsMeshLayer cannot be copied.

◆ providerType()

QString QgsMeshLayer::providerType ( ) const

Returns the provider type for this layer.

Definition at line 181 of file qgsmeshlayer.cpp.

◆ readStyle()

bool QgsMeshLayer::readStyle	(	const QDomNode &	node,
		QString &	errorMessage,
		QgsReadWriteContext &	context,
		StyleCategories	categories = `AllStyleCategories`
	)

overridevirtual

Read the style for the current layer from the DOM node supplied.

Parameters

node	node that will contain the style definition for this layer.
errorMessage	reference to string that will be updated with any error messages
context	reading context (used for transform from relative to absolute paths)
categories	the style categories to be read

Returns: true in case of success.

Note: To be implemented in subclasses. Default implementation does nothing and returns false.

Since: QGIS 2.16

Reimplemented from QgsMapLayer.

Definition at line 988 of file qgsmeshlayer.cpp.

◆ readSymbology()

bool QgsMeshLayer::readSymbology	(	const QDomNode &	node,
		QString &	errorMessage,
		QgsReadWriteContext &	context,
		QgsMapLayer::StyleCategories	categories = `QgsMapLayer::AllStyleCategories`
	)

override

Definition at line 929 of file qgsmeshlayer.cpp.

◆ readXml()

bool QgsMeshLayer::readXml	(	const QDomNode &	layer_node,
		QgsReadWriteContext &	context
	)

overridevirtual

Called by readLayerXML(), used by children to read state specific to them from project files.

Reimplemented from QgsMapLayer.

Definition at line 1013 of file qgsmeshlayer.cpp.

◆ reload()

void QgsMeshLayer::reload ( )

overridevirtual

Synchronises with changes in the datasource.

Reimplemented from QgsMapLayer.

Definition at line 1141 of file qgsmeshlayer.cpp.

◆ rendererCache()

QgsMeshLayerRendererCache * QgsMeshLayer::rendererCache ( )

Returns native mesh (nullptr before rendering)

Note: Not available in Python bindings

Definition at line 258 of file qgsmeshlayer.cpp.

◆ rendererSettings()

QgsMeshRendererSettings QgsMeshLayer::rendererSettings ( ) const

Returns renderer settings.

Definition at line 263 of file qgsmeshlayer.cpp.

◆ resetDatasetGroupTreeItem()

void QgsMeshLayer::resetDatasetGroupTreeItem ( )

Reset the dataset group tree item to default from provider.

Since: QGIS 3.14

Definition at line 740 of file qgsmeshlayer.cpp.

◆ setDatasetGroupTreeRootItem()

void QgsMeshLayer::setDatasetGroupTreeRootItem ( QgsMeshDatasetGroupTreeItem * rootItem )

Sets the root items of the dataset group tree item.

Changes active dataset groups if those one are not enabled anymore :

new active scalar dataset group is the first root item enabled child
new active vector dataset group is none

Doesn't take ownership of the pointed item, the root item is cloned.

Parameters

rootItem the new root item

Since: QGIS 3.14

Definition at line 598 of file qgsmeshlayer.cpp.

◆ setMeshSimplificationSettings()

void QgsMeshLayer::setMeshSimplificationSettings ( const QgsMeshSimplificationSettings & meshSimplificationSettings )

Sets mesh simplification settings.

Since: QGIS 3.14

Definition at line 857 of file qgsmeshlayer.cpp.

◆ setReferenceTime()

void QgsMeshLayer::setReferenceTime ( const QDateTime & referenceTime )

Sets the reference time of the layer.

Parameters

referenceTime the reference time

Since: QGIS 3.14

Definition at line 643 of file qgsmeshlayer.cpp.

◆ setRendererSettings()

void QgsMeshLayer::setRendererSettings ( const QgsMeshRendererSettings & settings )

Sets new renderer settings.

Definition at line 268 of file qgsmeshlayer.cpp.

◆ setStaticScalarDatasetIndex()

void QgsMeshLayer::setStaticScalarDatasetIndex ( const QgsMeshDatasetIndex & staticScalarDatasetIndex )

Sets the static scalar dataset index that is rendered if the temporal properties is not active.

Parameters

staticScalarDatasetIndex the scalar data set index

Since: QGIS 3.14

Definition at line 841 of file qgsmeshlayer.cpp.

◆ setStaticVectorDatasetIndex()

void QgsMeshLayer::setStaticVectorDatasetIndex ( const QgsMeshDatasetIndex & staticVectorDatasetIndex )

Sets the static vector dataset index that is rendered if the temporal properties is not active.

Parameters

staticVectorDatasetIndex the vector data set index

Since: QGIS 3.14

Definition at line 830 of file qgsmeshlayer.cpp.

◆ setTemporalMatchingMethod()

void QgsMeshLayer::setTemporalMatchingMethod ( const QgsMeshDataProviderTemporalCapabilities::MatchingTemporalDatasetMethod & matchingMethod )

Sets the method used to match the temporal dataset from a requested time, see activeVectorDatasetAtTime()

Parameters

matchingMethod the matching method

Since: QGIS 3.14

Definition at line 651 of file qgsmeshlayer.cpp.

◆ setTimeSettings()

void QgsMeshLayer::setTimeSettings ( const QgsMeshTimeSettings & settings )

Sets time format settings.

Since: QGIS 3.8

Definition at line 289 of file qgsmeshlayer.cpp.

◆ setTransformContext

void QgsMeshLayer::setTransformContext ( const QgsCoordinateTransformContext & transformContext )

overrideslot

Sets the coordinate transform context to transformContext.

Since: QGIS 3.8

Definition at line 432 of file qgsmeshlayer.cpp.

◆ snapOnElement()

QgsPointXY QgsMeshLayer::snapOnElement	(	QgsMesh::ElementType	elementType,
		const QgsPointXY &	point,
		double	searchRadius
	)

Returns the position of the snapped point on the mesh element closest to point intersecting with the searching area defined by point and searchRadius.

For vertex, the snapped position is the vertex position For edge, the snapped position is the projected point on the edge, extremity of edge if outside the edge For face, the snapped position is the centroid of the face The returned position is in map coordinates.

Note: It uses previously cached and indexed triangular mesh and so if the layer has not been rendered previously (e.g. when used in a script) it returns empty QgsPointXY

See also: updateTriangularMesh

Parameters

elementType	the type of element to snap
point	the center of the search area in map coordinates
searchRadius	the radius of the search area in map units

Returns: the position of the snapped point on the closest element, empty QgsPointXY if no element of type elementType

Since: QGIS 3.14

Definition at line 811 of file qgsmeshlayer.cpp.

◆ staticScalarDatasetIndex()

QgsMeshDatasetIndex QgsMeshLayer::staticScalarDatasetIndex ( ) const

Returns the static scalar dataset index that is rendered if the temporal properties is not active.

Since: QGIS 3.14

Definition at line 825 of file qgsmeshlayer.cpp.

◆ staticVectorDatasetIndex()

QgsMeshDatasetIndex QgsMeshLayer::staticVectorDatasetIndex ( ) const

Returns the static vector dataset index that is rendered if the temporal properties is not active.

Since: QGIS 3.14

Definition at line 638 of file qgsmeshlayer.cpp.

◆ subLayers()

QStringList QgsMeshLayer::subLayers ( ) const

overridevirtual

Returns the sublayers of this layer.

(Useful for providers that manage their own layers, such as WMS).

Reimplemented from QgsMapLayer.

Definition at line 1161 of file qgsmeshlayer.cpp.

◆ temporalProperties()

QgsMapLayerTemporalProperties * QgsMeshLayer::temporalProperties ( )

overridevirtual

Returns the layer's temporal properties.

This may be nullptr, depending on the layer type.

Since: QGIS 3.14

Reimplemented from QgsMapLayer.

Definition at line 1210 of file qgsmeshlayer.cpp.

◆ timeSettings()

QgsMeshTimeSettings QgsMeshLayer::timeSettings ( ) const

Returns time format settings.

Since: QGIS 3.8

Definition at line 284 of file qgsmeshlayer.cpp.

◆ timeSettingsChanged

void QgsMeshLayer::timeSettingsChanged ( )

signal

Emitted when time format is changed.

Since: QGIS 3.8

◆ triangularMesh()

QgsTriangularMesh * QgsMeshLayer::triangularMesh ( double minimumTriangleSize = 0 ) const

Returns triangular mesh (nullptr before rendering or calling to updateMesh).

If the parameter triangleSize is provided, among the base triangular mesh and the simplified triangular meshes, the one returned is which has the average triangle size just greater than triangleSize. The size of a triangle is the maximum between the height and the width of the triangle bounding box For default parameter (=0), it returns base triangular mesh.

Parameters

minimumTriangleSize is the average size criteria in canvas map units

Returns: triangular mesh, the layer keeps the ownership

Note: triangular size added in QGIS 3.14; Not available in Python bindings

Definition at line 224 of file qgsmeshlayer.cpp.

◆ updateTriangularMesh()

void QgsMeshLayer::updateTriangularMesh ( const QgsCoordinateTransform & transform = QgsCoordinateTransform() )

Gets native mesh and updates (creates if it doesn't exist) the base triangular mesh.

Parameters

transform Transformation from layer CRS to destination (e.g. map) CRS. With invalid transform, it keeps the native mesh CRS

Since: QGIS 3.14

Definition at line 238 of file qgsmeshlayer.cpp.

◆ writeStyle()

bool QgsMeshLayer::writeStyle	(	QDomNode &	node,
		QDomDocument &	doc,
		QString &	errorMessage,
		const QgsReadWriteContext &	context,
		StyleCategories	categories = `AllStyleCategories`
	)		const

overridevirtual

Write just the symbology information for the layer into the document.

Parameters

node	the node that will have the style element added to it.
doc	the document that will have the QDomNode added.
errorMessage	reference to string that will be updated with any error messages
context	writing context (used for transform from absolute to relative paths)
categories	the style categories to be written

Returns: true in case of success.

Note: To be implemented in subclasses. Default implementation does nothing and returns false.; There is a confusion of terms with the GUI. This method actually writes what is known as the symbology in the application.

Since: QGIS 2.16

Reimplemented from QgsMapLayer.

Definition at line 983 of file qgsmeshlayer.cpp.

◆ writeSymbology()

bool QgsMeshLayer::writeSymbology	(	QDomNode &	node,
		QDomDocument &	doc,
		QString &	errorMessage,
		const QgsReadWriteContext &	context,
		QgsMapLayer::StyleCategories	categories = `QgsMapLayer::AllStyleCategories`
	)		const

override

Definition at line 958 of file qgsmeshlayer.cpp.

◆ writeXml()

bool QgsMeshLayer::writeXml	(	QDomNode &	layer_node,
		QDomDocument &	document,
		const QgsReadWriteContext &	context
	)		const

overridevirtual

Called by writeLayerXML(), used by children to write state specific to them to project files.

Reimplemented from QgsMapLayer.

Definition at line 1092 of file qgsmeshlayer.cpp.

The documentation for this class was generated from the following files:

/build/qgis-3.14.0+99unstable/src/core/mesh/qgsmeshlayer.h
/build/qgis-3.14.0+99unstable/src/core/mesh/qgsmeshlayer.cpp

Classes

Public Slots

Signals

Public Member Functions

Additional Inherited Members

Detailed Description

Mesh data providers

Memory data providerType (mesh_memory)

MDAL data provider (mdal)

Constructor & Destructor Documentation

◆ QgsMeshLayer() [1/2]

◆ ~QgsMeshLayer()

◆ QgsMeshLayer() [2/2]

Member Function Documentation

◆ activeScalarDatasetAtTime()

◆ activeScalarDatasetGroupChanged

◆ activeVectorDatasetAtTime()

◆ activeVectorDatasetGroupChanged

◆ addDatasets()

◆ clone()

◆ createMapRenderer()

◆ dataProvider() [1/2]

◆ dataProvider() [2/2]

◆ dataset1dValue()

◆ dataset3dValue()

◆ datasetGroupTreeRootItem()

◆ datasetIndexAtTime()

◆ datasetValue()

◆ decodedSource()

◆ encodedSource()

◆ extent()

◆ firstValidTimeStep()

◆ formatTime()

◆ meshSimplificationSettings()

◆ nativeMesh() [1/2]

◆ nativeMesh() [2/2]

◆ operator=()

◆ providerType()

◆ readStyle()

◆ readSymbology()

◆ readXml()

◆ reload()

◆ rendererCache()

◆ rendererSettings()

◆ resetDatasetGroupTreeItem()

◆ setDatasetGroupTreeRootItem()

◆ setMeshSimplificationSettings()

◆ setReferenceTime()

◆ setRendererSettings()

◆ setStaticScalarDatasetIndex()

◆ setStaticVectorDatasetIndex()

◆ setTemporalMatchingMethod()

◆ setTimeSettings()

◆ setTransformContext

◆ snapOnElement()

◆ staticScalarDatasetIndex()

◆ staticVectorDatasetIndex()

◆ subLayers()

◆ temporalProperties()

◆ timeSettings()

◆ timeSettingsChanged

◆ triangularMesh()

◆ updateTriangularMesh()

◆ writeStyle()

◆ writeSymbology()

◆ writeXml()