Class that adds extra information to QgsLabelFeature for labeling of diagrams. More...

#include <qgsvectorlayerdiagramprovider.h>

Inheritance diagram for QgsDiagramLabelFeature:

Public Member Functions
	QgsDiagramLabelFeature (QgsFeatureId id, geos::unique_ptr geometry, QSizeF size)
	Create label feature, takes ownership of the geometry instance. More...

const QgsAttributes &	attributes ()
	Gets feature's attributes - used for rendering of diagrams. More...

void	setAttributes (const QgsAttributes &attrs)
	Store feature's attributes - used for rendering of diagrams. More...

Public Member Functions inherited from QgsLabelFeature
	QgsLabelFeature (QgsFeatureId id, geos::unique_ptr geometry, QSizeF size)
	Create label feature, takes ownership of the geometry instance. More...

virtual	~QgsLabelFeature ()
	Clean up geometry and curved label info (if present) More...

bool	alwaysShow () const
	Whether label should be always shown (sets very high label priority) More...

pal::LineArrangementFlags	arrangementFlags () const
	Returns the feature's arrangement flags. More...

pal::LabelInfo *	curvedLabelInfo () const
	Gets additional infor required for curved label placement. Returns `nullptr` if not set. More...

double	distLabel () const
	Applies to "around point" placement strategy or linestring features. More...

QgsFeature	feature () const
	Returns the original feature associated with this label. More...

double	fixedAngle () const
	Angle in degrees of the fixed angle (relevant only if hasFixedAngle() returns `true`) More...

QgsPointXY	fixedPosition () const
	Coordinates of the fixed position (relevant only if hasFixedPosition() returns `true`) More...

GEOSGeometry *	geometry () const
	Gets access to the associated geometry. More...

bool	hasFixedAngle () const
	Whether the label should use a fixed angle instead of using angle from automatic placement. More...

bool	hasFixedPosition () const
	Whether the label should use a fixed position instead of being automatically placed. More...

bool	hasFixedQuadrant () const
	Returns whether the quadrant for the label is fixed. More...

QgsFeatureId	id () const
	Identifier of the label (unique within the parent label provider) More...

bool	isObstacle () const
	Returns whether the feature will act as an obstacle for labels. More...

bool	labelAllParts () const
	Returns `true` if all parts of the feature should be labeled. More...

QString	labelText () const
	Text of the label. More...

pal::Layer *	layer () const
	Gets PAL layer of the label feature. Should be only used internally in PAL. More...

double	obstacleFactor () const
	Returns the obstacle factor for the feature. More...

GEOSGeometry *	obstacleGeometry () const
	Returns the label's obstacle geometry, if different to the feature geometry. More...

QgsPalLayerSettings::OffsetType	offsetType () const
	Returns the offset type, which determines how offsets and distance to label behaves. More...

double	overrunDistance () const
	Returns the permissible distance (in map units) which labels are allowed to overrun the start or end of linear features. More...

double	overrunSmoothDistance () const
	Returns the distance (in map units) with which the ends of linear features are averaged over when calculating the direction at which to overrun labels. More...

QgsGeometry	permissibleZone () const
	Returns the label's permissible zone geometry. More...

const GEOSPreparedGeometry *	permissibleZonePrepared () const
	Returns a GEOS prepared geometry representing the label's permissibleZone(). More...

QgsPointXY	positionOffset () const
	Applies only to "offset from point" placement strategy. More...

QVector< QgsPalLayerSettings::PredefinedPointPosition >	predefinedPositionOrder () const
	Returns the priority ordered list of predefined positions for label candidates. More...

double	priority () const
	Returns the feature's labeling priority. More...

QgsAbstractLabelProvider *	provider () const
	Returns provider of this instance. More...

QPointF	quadOffset () const
	Applies to "offset from point" placement strategy and "around point" (in case hasFixedQuadrant() returns `true`). More...

double	repeatDistance () const
	Applies only to linestring features - after what distance (in map units) the labels should be repeated (0 = no repetitions) More...

void	setAlwaysShow (bool enabled)
	Sets whether label should be always shown (sets very high label priority) More...

void	setArrangementFlags (pal::LineArrangementFlags flags)
	Sets the feature's arrangement flags. More...

void	setCurvedLabelInfo (pal::LabelInfo *info)
	takes ownership of the instance More...

void	setDistLabel (double dist)
	Applies to "around point" placement strategy or linestring features. More...

void	setFeature (const QgsFeature &feature)
	Sets the original feature associated with this label. More...

void	setFixedAngle (double angle)
	Sets angle in degrees of the fixed angle (relevant only if hasFixedAngle() returns `true`) More...

void	setFixedPosition (const QgsPointXY &point)
	Sets coordinates of the fixed position (relevant only if hasFixedPosition() returns `true`) More...

void	setHasFixedAngle (bool enabled)
	Sets whether the label should use a fixed angle instead of using angle from automatic placement. More...

void	setHasFixedPosition (bool enabled)
	Sets whether the label should use a fixed position instead of being automatically placed. More...

void	setHasFixedQuadrant (bool enabled)
	Sets whether the quadrant for the label must be respected. More...

void	setIsObstacle (bool enabled)
	Sets whether the feature will act as an obstacle for labels. More...

void	setLabelAllParts (bool labelAllParts)
	Sets whether all parts of the feature should be labeled. More...

void	setLabelText (const QString &text)
	Sets text of the label. More...

void	setLayer (pal::Layer *layer)
	Assign PAL layer to the label feature. Should be only used internally in PAL. More...

void	setObstacleFactor (double factor)
	Sets the obstacle factor for the feature. More...

void	setObstacleGeometry (geos::unique_ptr obstacleGeom)
	Sets the label's obstacle geometry, if different to the feature geometry. More...

void	setOffsetType (QgsPalLayerSettings::OffsetType type)
	Sets the offset type, which determines how offsets and distance to label behaves. More...

void	setOverrunDistance (double distance)
	Sets the permissible distance (in map units) which labels are allowed to overrun the start or end of linear features. More...

void	setOverrunSmoothDistance (double distance)
	Sets the distance (in map units) with which the ends of linear features are averaged over when calculating the direction at which to overrun labels. More...

void	setPermissibleZone (const QgsGeometry &geometry)
	Sets the label's permissible zone geometry. More...

void	setPositionOffset (const QgsPointXY &offset)
	Applies only to "offset from point" placement strategy. More...

void	setPredefinedPositionOrder (const QVector< QgsPalLayerSettings::PredefinedPointPosition > &order)
	Sets the priority ordered list of predefined positions for label candidates. More...

void	setPriority (double priority)
	Sets the priority for labeling the feature. More...

void	setQuadOffset (QPointF quadOffset)
	Set which side of the point to use. More...

void	setRepeatDistance (double dist)
	Applies only to linestring features - set after what distance (in map units) the labels should be repeated (0 = no repetitions) More...

void	setRotatedSize (QSizeF size)
	Sets an alternate label size to be used when a label rotation angle is between 45 to 135 and 235 to 313 degrees and the text rotation mode is set to rotation-based. More...

void	setSymbol (const QgsSymbol *symbol)
	Sets the feature symbol associated with this label. More...

void	setSymbolSize (QSizeF size)
	Sets the size of the rendered symbol associated with this feature. More...

void	setVisualMargin (const QgsMargins &margin)
	Sets the visual margin for the label feature. More...

void	setZIndex (double zIndex)
	Sets the label's z-index. More...

QSizeF	size (double angle=0.0) const
	Size of the label (in map units) More...

const QgsSymbol *	symbol ()
	Returns the feature symbol associated with this label. More...

const QSizeF &	symbolSize () const
	Returns the size of the rendered symbol associated with this feature, if applicable. More...

const QgsMargins &	visualMargin () const
	Returns the visual margin for the label feature. More...

double	zIndex () const
	Returns the label's z-index. More...

Protected Attributes
QgsAttributes	mAttributes
	Stores attribute values for diagram rendering. More...

Protected Attributes inherited from QgsLabelFeature
bool	mAlwaysShow
	whether to always show label - even in case of collisions More...

pal::LineArrangementFlags	mArrangementFlags = nullptr

double	mDistLabel
	distance of label from the feature (only for "around point" placement or linestrings) More...

double	mFixedAngle
	fixed rotation for the label (instead of automatic choice) More...

QgsPointXY	mFixedPosition
	fixed position for the label (instead of automatic placement) More...

geos::unique_ptr	mGeometry
	Geometry of the feature to be labelled. More...

bool	mHasFixedAngle
	whether mFixedAngle should be respected More...

bool	mHasFixedPosition
	whether mFixedPosition should be respected More...

bool	mHasFixedQuadrant
	whether mQuadOffset should be respected (only for "around point" placement) More...

QgsFeatureId	mId
	Associated ID unique within the parent label provider. More...

pal::LabelInfo *	mInfo = nullptr
	extra information for curved labels (may be `nullptr`) More...

bool	mIsObstacle
	whether the feature geometry acts as an obstacle for labels More...

QString	mLabelText
	text of the label More...

pal::Layer *	mLayer = nullptr
	Pointer to PAL layer (assigned when registered to PAL) More...

double	mObstacleFactor
	how strong is the geometry acting as obstacle More...

geos::unique_ptr	mObstacleGeometry
	Optional geometry to use for label obstacles, if different to mGeometry. More...

QgsPalLayerSettings::OffsetType	mOffsetType
	Offset type for certain placement modes. More...

double	mOverrunDistance = 0
	Distance to allow label to overrun linear features. More...

double	mOverrunSmoothDistance = 0
	Distance to smooth angle of line start and end when calculating overruns. More...

QgsGeometry	mPermissibleZone
	Optional geometry to use for label's permissible zone. More...

QgsPointXY	mPositionOffset
	offset of label from the feature (only for "offset from point" placement) More...

QVector< QgsPalLayerSettings::PredefinedPointPosition >	mPredefinedPositionOrder
	Ordered list of predefined positions for label (only for OrderedPositionsAroundPoint placement) More...

double	mPriority
	Priority of the label. More...

QPointF	mQuadOffset
	whether the side of the label is fixed (only for "around point" placement) More...

double	mRepeatDistance
	distance after which label should be repeated (only for linestrings) More...

QSizeF	mRotatedSize
	Width and height of the label when rotated between 45 to 135 and 235 to 315 degrees;. More...

QSizeF	mSize
	Width and height of the label. More...

QSizeF	mSymbolSize
	Size of associated rendered symbol, if applicable. More...

QgsMargins	mVisualMargin
	Visual margin of label contents. More...

double	mZIndex
	Z-index of label (higher z-index labels are rendered on top of lower z-index labels) More...