Geometry collection. More...

#include <qgsgeometrycollection.h>

Inheritance diagram for QgsGeometryCollection:

[legend]

Public Member Functions
	QgsGeometryCollection ()

	QgsGeometryCollection (const QgsGeometryCollection &c)

	~QgsGeometryCollection () override

virtual bool	addGeometry (QgsAbstractGeometry *g)
	Adds a geometry and takes ownership. Returns true in case of success. More...

bool	addMValue (double mValue=0) override
	Adds a measure to the geometry, initialized to a preset value. More...

bool	addZValue (double zValue=0) override
	Adds a z-dimension to the geometry, initialized to a preset value. More...

void	adjacentVertices (QgsVertexId vertex, QgsVertexId &previousVertex, QgsVertexId &nextVertex) const override
	Returns the vertices adjacent to a specified vertex within a geometry. More...

double	area () const override
	Returns the area of the geometry. More...

QDomElement	asGml2 (QDomDocument &doc, int precision=17, const QString &ns="gml") const override
	Returns a GML2 representation of the geometry. More...

QDomElement	asGml3 (QDomDocument &doc, int precision=17, const QString &ns="gml") const override
	Returns a GML3 representation of the geometry. More...

QString	asJson (int precision=17) const override
	Returns a GeoJSON representation of the geometry. More...

QByteArray	asWkb () const override
	Returns a WKB representation of the geometry. More...

QString	asWkt (int precision=17) const override
	Returns a WKT representation of the geometry. More...

QgsAbstractGeometry *	boundary () const override
	Returns the closure of the combinatorial boundary of the geometry (ie the topological boundary of the geometry). More...

QgsRectangle	boundingBox () const override
	Returns the minimal bounding box for the geometry. More...

const QgsGeometryCollection *	cast (const QgsAbstractGeometry *geom) const
	Cast the geom to a QgsGeometryCollection. More...

void	clear () override
	Clears the geometry, ie reset it to a null geometry. More...

QgsGeometryCollection *	clone () const override
	Clones the geometry by performing a deep copy. More...

double	closestSegment (const QgsPoint &pt, QgsPoint &segmentPt, QgsVertexId &vertexAfter, int leftOf=nullptr, double epsilon=4 DBL_EPSILON) const override
	Searches for the closest segment of the geometry to a given point. More...

QgsCoordinateSequence	coordinateSequence () const override
	Retrieves the sequence of geometries, rings and nodes. More...

QgsGeometryCollection *	createEmptyWithSameType () const override
	Creates a new geometry with the same class and same WKB type as the original and transfers ownership. More...

bool	deleteVertex (QgsVertexId position) override
	Deletes a vertex within the geometry. More...

int	dimension () const override
	Returns the inherent dimension of the geometry. More...

void	draw (QPainter &p) const override
	Draws the geometry using the specified QPainter. More...

bool	dropMValue () override
	Drops any measure values which exist in the geometry. More...

bool	dropZValue () override
	Drops any z-dimensions which exist in the geometry. More...

bool	fromWkb (QgsConstWkbPtr &wkb) override
	Sets the geometry from a WKB string. More...

bool	fromWkt (const QString &wkt) override
	Sets the geometry from a WKT string. More...

const QgsAbstractGeometry *	geometryN (int n) const
	Returns a const reference to a geometry from within the collection. More...

QgsAbstractGeometry *	geometryN (int n)
	Returns a geometry from within the collection. More...

QString	geometryType () const override
	Returns a unique string representing the geometry type. More...

bool	hasCurvedSegments () const override
	Returns true if the geometry contains curved segments. More...

virtual bool	insertGeometry (QgsAbstractGeometry *g, int index)
	Inserts a geometry before a specified index and takes ownership. More...

bool	insertVertex (QgsVertexId position, const QgsPoint &vertex) override
	Inserts a vertex into the geometry. More...

bool	isEmpty () const override
	Returns true if the geometry is empty. More...

double	length () const override
	Returns the length of the geometry. More...

bool	moveVertex (QgsVertexId position, const QgsPoint &newPos) override
	Moves a vertex within the geometry. More...

int	nCoordinates () const override
	Returns the number of nodes contained in the geometry. More...

bool	nextVertex (QgsVertexId &id, QgsPoint &vertex) const override
	Returns next vertex id and coordinates. More...

int	numGeometries () const
	Returns the number of geometries within the collection. More...

bool	operator!= (const QgsAbstractGeometry &other) const override

QgsGeometryCollection &	operator= (const QgsGeometryCollection &c)

bool	operator== (const QgsAbstractGeometry &other) const override

int	partCount () const override
	Returns count of parts contained in the geometry. More...

double	perimeter () const override
	Returns the perimeter of the geometry. More...

bool	removeDuplicateNodes (double epsilon=4 *DBL_EPSILON, bool useZValues=false) override
	Removes duplicate nodes from the geometry, wherever removing the nodes does not result in a degenerate geometry. More...

virtual bool	removeGeometry (int nr)
	Removes a geometry from the collection. More...

int	ringCount (int part=0) const override
	Returns the number of rings of which this geometry is built. More...

QgsAbstractGeometry *	segmentize (double tolerance=M_PI_2/90, SegmentationToleranceType toleranceType=MaximumAngle) const override
	Returns a geometry without curves. More...

double	segmentLength (QgsVertexId startVertex) const override
	Returns the length of the segment of the geometry which begins at startVertex. More...

QgsGeometryCollection *	snappedToGrid (double hSpacing, double vSpacing, double dSpacing=0, double mSpacing=0) const override
	Makes a new geometry with all the points or vertices snapped to the closest point of the grid. More...

QgsGeometryCollection *	toCurveType () const override
	Returns the geometry converted to the more generic curve type. More...

void	transform (const QgsCoordinateTransform &ct, QgsCoordinateTransform::TransformDirection d=QgsCoordinateTransform::ForwardTransform, bool transformZ=false) override
	Transforms the geometry using a coordinate transform. More...

void	transform (const QTransform &t, double zTranslate=0.0, double zScale=1.0, double mTranslate=0.0, double mScale=1.0) override
	Transforms the x and y components of the geometry using a QTransform object t. More...

double	vertexAngle (QgsVertexId vertex) const override
	Returns approximate angle at a vertex. More...

QgsPoint	vertexAt (QgsVertexId id) const override
	Returns the point corresponding to a specified vertex id. More...

int	vertexCount (int part=0, int ring=0) const override
	Returns the number of vertices of which this geometry is built. More...

int	vertexNumberFromVertexId (QgsVertexId id) const override
	Returns the vertex number corresponding to a vertex id. More...

Public Member Functions inherited from QgsAbstractGeometry
	QgsAbstractGeometry ()=default
	Constructor for QgsAbstractGeometry. More...

	QgsAbstractGeometry (const QgsAbstractGeometry &geom)

virtual	~QgsAbstractGeometry ()=default

virtual QgsPoint	centroid () const
	Returns the centroid of the geometry. More...

virtual bool	convertTo (QgsWkbTypes::Type type)
	Converts the geometry to a specified type. More...

bool	is3D () const
	Returns true if the geometry is 3D and contains a z-value. More...

bool	isMeasure () const
	Returns true if the geometry contains m values. More...

QgsAbstractGeometry &	operator= (const QgsAbstractGeometry &geom)

QgsVertexIterator	vertices () const
	Returns Java-style iterator for traversal of vertices of the geometry. More...

vertex_iterator	vertices_begin () const
	Returns STL-style iterator pointing to the first vertex of the geometry. More...

vertex_iterator	vertices_end () const
	Returns STL-style iterator pointing to the imaginary vertex after the last vertex of the geometry. More...

QgsWkbTypes::Type	wkbType () const
	Returns the WKB type of the geometry. More...

QString	wktTypeStr () const
	Returns the WKT type string of the geometry. More...

Protected Member Functions
QgsRectangle	calculateBoundingBox () const override
	Default calculator for the minimal bounding box for the geometry. More...

int	childCount () const override
	Returns number of child geometries (for geometries with child geometries) or child points (for geometries without child geometries - i.e. More...

QgsAbstractGeometry *	childGeometry (int index) const override
	Returns pointer to child geometry (for geometries with child geometries - i.e. More...

void	clearCache () const override
	Clears any cached parameters associated with the geometry, e.g., bounding boxes. More...

bool	fromCollectionWkt (const QString &wkt, const QVector< QgsAbstractGeometry *> &subtypes, const QString &defaultChildWkbType=QString())
	Reads a collection from a WKT string. More...

virtual bool	wktOmitChildType () const
	Returns whether child type names are omitted from Wkt representations of the collection. More...

Protected Member Functions inherited from QgsAbstractGeometry
virtual QgsPoint	childPoint (int index) const
	Returns point at index (for geometries without child geometries - i.e. More...

virtual bool	hasChildGeometries () const
	Returns whether the geometry has any child geometries (false for point / curve, true otherwise) More...

void	setZMTypeFromSubGeometry (const QgsAbstractGeometry *subggeom, QgsWkbTypes::Type baseGeomType)
	Updates the geometry type based on whether sub geometries contain z or m values. More...

Protected Attributes
QVector< QgsAbstractGeometry *>	mGeometries

Protected Attributes inherited from QgsAbstractGeometry
QgsWkbTypes::Type	mWkbType = QgsWkbTypes::Unknown

Additional Inherited Members
Public Types inherited from QgsAbstractGeometry
enum	SegmentationToleranceType { MaximumAngle = 0, MaximumDifference }
	Segmentation tolerance as maximum angle or maximum difference between approximation and circle. More...

Detailed Description

Geometry collection.

Since: QGIS 2.10

Definition at line 34 of file qgsgeometrycollection.h.

Constructor & Destructor Documentation

◆ QgsGeometryCollection() [1/2]

QgsGeometryCollection::QgsGeometryCollection ( )

Definition at line 31 of file qgsgeometrycollection.cpp.

◆ QgsGeometryCollection() [2/2]

QgsGeometryCollection::QgsGeometryCollection ( const QgsGeometryCollection & c )

Definition at line 36 of file qgsgeometrycollection.cpp.

◆ ~QgsGeometryCollection()

QgsGeometryCollection::~QgsGeometryCollection ( )

override

Definition at line 62 of file qgsgeometrycollection.cpp.

Member Function Documentation

◆ addGeometry()

bool QgsGeometryCollection::addGeometry ( QgsAbstractGeometry * g )

virtual

Adds a geometry and takes ownership. Returns true in case of success.

Reimplemented in QgsMultiPoint, QgsMultiCurve, QgsMultiLineString, QgsMultiSurface, and QgsMultiPolygon.

Definition at line 213 of file qgsgeometrycollection.cpp.

◆ addMValue()

bool QgsGeometryCollection::addMValue ( double mValue = 0 )

overridevirtual

Adds a measure to the geometry, initialized to a preset value.

Parameters

mValue initial m-value for all nodes

Returns: true on success

Since: QGIS 2.12

See also: dropMValue(); addZValue()

Implements QgsAbstractGeometry.

Definition at line 789 of file qgsgeometrycollection.cpp.

◆ addZValue()

bool QgsGeometryCollection::addZValue ( double zValue = 0 )

overridevirtual

Adds a z-dimension to the geometry, initialized to a preset value.

Parameters

zValue initial z-value for all nodes

Returns: true on success

Since: QGIS 2.12

See also: dropZValue(); addMValue()

Implements QgsAbstractGeometry.

Definition at line 774 of file qgsgeometrycollection.cpp.

◆ adjacentVertices()

void QgsGeometryCollection::adjacentVertices	(	QgsVertexId	vertex,
		QgsVertexId &	previousVertex,
		QgsVertexId &	nextVertex
	)		const

overridevirtual

Returns the vertices adjacent to a specified vertex within a geometry.

Since: QGIS 3.0

Implements QgsAbstractGeometry.

Definition at line 146 of file qgsgeometrycollection.cpp.

◆ area()

double QgsGeometryCollection::area ( ) const

overridevirtual

Returns the area of the geometry.

See also: length(); perimeter()

Reimplemented from QgsAbstractGeometry.

Definition at line 599 of file qgsgeometrycollection.cpp.

◆ asGml2()

QDomElement QgsGeometryCollection::asGml2	(	QDomDocument &	doc,
		int	precision = `17`,
		const QString &	ns = `"gml"`
	)		const

overridevirtual

Returns a GML2 representation of the geometry.

Parameters

doc	DOM document
precision	number of decimal places for coordinates
ns	XML namespace

See also: asWkb(); asWkt(); asGml3(); asJson()

Implements QgsAbstractGeometry.

Reimplemented in QgsMultiPoint, QgsMultiCurve, QgsMultiLineString, QgsMultiSurface, and QgsMultiPolygon.

Definition at line 393 of file qgsgeometrycollection.cpp.

◆ asGml3()

QDomElement QgsGeometryCollection::asGml3	(	QDomDocument &	doc,
		int	precision = `17`,
		const QString &	ns = `"gml"`
	)		const

overridevirtual

Returns a GML3 representation of the geometry.

Parameters

doc	DOM document
precision	number of decimal places for coordinates
ns	XML namespace

See also: asWkb(); asWkt(); asGml2(); asJson()

Implements QgsAbstractGeometry.

Reimplemented in QgsMultiPoint, QgsMultiCurve, QgsMultiLineString, QgsMultiSurface, and QgsMultiPolygon.

Definition at line 405 of file qgsgeometrycollection.cpp.

◆ asJson()

QString QgsGeometryCollection::asJson ( int precision = 17 ) const

overridevirtual

Returns a GeoJSON representation of the geometry.

Parameters

precision number of decimal places for coordinates

See also: asWkb(); asWkt(); asGml2(); asGml3()

Implements QgsAbstractGeometry.

Reimplemented in QgsMultiPoint, QgsMultiCurve, QgsMultiLineString, QgsMultiSurface, and QgsMultiPolygon.

Definition at line 417 of file qgsgeometrycollection.cpp.

◆ asWkb()

QByteArray QgsGeometryCollection::asWkb ( ) const

overridevirtual

Returns a WKB representation of the geometry.

See also: asWkt; asGML2; asGML3; asJson()

Since: QGIS 3.0

Implements QgsAbstractGeometry.

Definition at line 346 of file qgsgeometrycollection.cpp.

◆ asWkt()

QString QgsGeometryCollection::asWkt ( int precision = 17 ) const

overridevirtual

Returns a WKT representation of the geometry.

Parameters

precision number of decimal places for coordinates

See also: asWkb(); asGml2(); asGml3(); asJson()

Implements QgsAbstractGeometry.

Definition at line 373 of file qgsgeometrycollection.cpp.

◆ boundary()

QgsAbstractGeometry * QgsGeometryCollection::boundary ( ) const

overridevirtual

Returns the closure of the combinatorial boundary of the geometry (ie the topological boundary of the geometry).

For instance, a polygon geometry will have a boundary consisting of the linestrings for each ring in the polygon.

Returns: boundary for geometry. May be null for some geometry types.

Since: QGIS 3.0

Implements QgsAbstractGeometry.

Reimplemented in QgsMultiCurve, QgsMultiPolygon, QgsMultiPoint, and QgsMultiSurface.

Definition at line 141 of file qgsgeometrycollection.cpp.

◆ boundingBox()

QgsRectangle QgsGeometryCollection::boundingBox ( ) const

overridevirtual

Returns the minimal bounding box for the geometry.

Implements QgsAbstractGeometry.

Definition at line 432 of file qgsgeometrycollection.cpp.

◆ calculateBoundingBox()

QgsRectangle QgsGeometryCollection::calculateBoundingBox ( ) const

overrideprotectedvirtual

Default calculator for the minimal bounding box for the geometry.

Derived classes should override this method if a more efficient bounding box calculation is available.

Reimplemented from QgsAbstractGeometry.

Definition at line 441 of file qgsgeometrycollection.cpp.

◆ cast()

const QgsGeometryCollection* QgsGeometryCollection::cast ( const QgsAbstractGeometry * geom ) const

inline

Cast the geom to a QgsGeometryCollection.

Should be used by qgsgeometry_cast<QgsGeometryCollection *>( geometry ).

Note: Not available in Python. Objects will be automatically be converted to the appropriate target type.

Since: QGIS 3.0

Definition at line 154 of file qgsgeometrycollection.h.

◆ childCount()

int QgsGeometryCollection::childCount ( ) const

overrideprotectedvirtual

Returns number of child geometries (for geometries with child geometries) or child points (for geometries without child geometries - i.e.

curve / point)

Note: used for vertex_iterator implementation

Since: QGIS 3.0

Reimplemented from QgsAbstractGeometry.

Definition at line 848 of file qgsgeometrycollection.cpp.

◆ childGeometry()

QgsAbstractGeometry * QgsGeometryCollection::childGeometry ( int index ) const

overrideprotectedvirtual

Returns pointer to child geometry (for geometries with child geometries - i.e.

geom. collection / polygon)

Note: used for vertex_iterator implementation

Since: QGIS 3.0

Reimplemented from QgsAbstractGeometry.

Definition at line 853 of file qgsgeometrycollection.cpp.

◆ clear()

void QgsGeometryCollection::clear ( )

overridevirtual

Clears the geometry, ie reset it to a null geometry.

Implements QgsAbstractGeometry.

Reimplemented in QgsMultiPoint, QgsMultiLineString, QgsMultiCurve, QgsMultiPolygon, and QgsMultiSurface.

Definition at line 105 of file qgsgeometrycollection.cpp.

◆ clearCache()

void QgsGeometryCollection::clearCache ( ) const

overrideprotectedvirtual

Clears any cached parameters associated with the geometry, e.g., bounding boxes.

Reimplemented from QgsAbstractGeometry.

Definition at line 457 of file qgsgeometrycollection.cpp.

◆ clone()

QgsGeometryCollection * QgsGeometryCollection::clone ( ) const

overridevirtual

Clones the geometry by performing a deep copy.

Implements QgsAbstractGeometry.

Reimplemented in QgsMultiLineString, QgsMultiPoint, QgsMultiPolygon, QgsMultiSurface, and QgsMultiCurve.

Definition at line 100 of file qgsgeometrycollection.cpp.

◆ closestSegment()

double QgsGeometryCollection::closestSegment	(	const QgsPoint &	pt,
		QgsPoint &	segmentPt,
		QgsVertexId &	vertexAfter,
		int *	leftOf = `nullptr`,
		double	epsilon = `4 *DBL_EPSILON`
	)		const

overridevirtual

Searches for the closest segment of the geometry to a given point.

Parameters

pt	specifies the point to find closest segment to
segmentPt	storage for the closest point within the geometry
vertexAfter	storage for the ID of the vertex at the end of the closest segment
leftOf	indicates whether the point lies on the left side of the geometry (-1 if point is to the left of the geometry, +1 if the point is to the right of the geometry, or 0 for cases where left/right could not be determined, e.g. point exactly on a line) false if point is to right of segment)
epsilon	epsilon for segment snapping

Returns: squared distance to closest segment or negative value on error

Implements QgsAbstractGeometry.

Definition at line 494 of file qgsgeometrycollection.cpp.

◆ coordinateSequence()

QgsCoordinateSequence QgsGeometryCollection::coordinateSequence ( ) const

overridevirtual

Retrieves the sequence of geometries, rings and nodes.

Returns: coordinate sequence

Implements QgsAbstractGeometry.

Definition at line 463 of file qgsgeometrycollection.cpp.

◆ createEmptyWithSameType()

QgsGeometryCollection * QgsGeometryCollection::createEmptyWithSameType ( ) const

overridevirtual

Creates a new geometry with the same class and same WKB type as the original and transfers ownership.

To create it, the geometry is default constructed and then the WKB is changed.

See also: clone()

Since: 3.0

Note: Not available in Python bindings

Implements QgsAbstractGeometry.

Reimplemented in QgsMultiCurve, QgsMultiSurface, QgsMultiLineString, QgsMultiPoint, and QgsMultiPolygon.

Definition at line 93 of file qgsgeometrycollection.cpp.

◆ deleteVertex()

bool QgsGeometryCollection::deleteVertex ( QgsVertexId position )

overridevirtual

Deletes a vertex within the geometry.

Parameters

position vertex id for vertex to delete

Returns: true if delete was successful

See also: insertVertex; moveVertex

Implements QgsAbstractGeometry.

Definition at line 560 of file qgsgeometrycollection.cpp.

◆ dimension()

int QgsGeometryCollection::dimension ( ) const

overridevirtual

Returns the inherent dimension of the geometry.

For example, this is 0 for a point geometry, 1 for a linestring and 2 for a polygon.

Implements QgsAbstractGeometry.

Definition at line 251 of file qgsgeometrycollection.cpp.

◆ draw()

void QgsGeometryCollection::draw ( QPainter & p ) const

overridevirtual

Draws the geometry using the specified QPainter.

Parameters

p	destination QPainter

Implements QgsAbstractGeometry.

Definition at line 289 of file qgsgeometrycollection.cpp.

◆ dropMValue()

bool QgsGeometryCollection::dropMValue ( )

overridevirtual

Drops any measure values which exist in the geometry.

Returns: true if m-values were present and have been removed

See also: addMValue(); dropZValue()

Since: QGIS 2.14

Implements QgsAbstractGeometry.

Definition at line 819 of file qgsgeometrycollection.cpp.

◆ dropZValue()

bool QgsGeometryCollection::dropZValue ( )

overridevirtual

Drops any z-dimensions which exist in the geometry.

Returns: true if Z values were present and have been removed

See also: addZValue(); dropMValue()

Since: QGIS 2.14

Implements QgsAbstractGeometry.

Definition at line 805 of file qgsgeometrycollection.cpp.

◆ fromCollectionWkt()

bool QgsGeometryCollection::fromCollectionWkt	(	const QString &	wkt,
		const QVector< QgsAbstractGeometry *> &	subtypes,
		const QString &	defaultChildWkbType = `QString()`
	)

protected

Reads a collection from a WKT string.

Definition at line 621 of file qgsgeometrycollection.cpp.

◆ fromWkb()

bool QgsGeometryCollection::fromWkb ( QgsConstWkbPtr & wkb )

overridevirtual

Sets the geometry from a WKB string.

After successful read the wkb argument will be at the position where the reading has stopped.

See also: fromWkt

Implements QgsAbstractGeometry.

Definition at line 298 of file qgsgeometrycollection.cpp.

◆ fromWkt()

bool QgsGeometryCollection::fromWkt ( const QString & wkt )

overridevirtual

Sets the geometry from a WKT string.

See also: fromWkb

Implements QgsAbstractGeometry.

Reimplemented in QgsMultiCurve, QgsMultiLineString, QgsMultiPoint, QgsMultiSurface, and QgsMultiPolygon.

Definition at line 336 of file qgsgeometrycollection.cpp.

◆ geometryN() [1/2]

const QgsAbstractGeometry * QgsGeometryCollection::geometryN ( int n ) const

Returns a const reference to a geometry from within the collection.

Parameters

n	index of geometry to return

Note: not available in Python bindings

Definition at line 189 of file qgsgeometrycollection.cpp.

◆ geometryN() [2/2]

QgsAbstractGeometry * QgsGeometryCollection::geometryN ( int n )

Returns a geometry from within the collection.

Parameters

n	index of geometry to return

Definition at line 194 of file qgsgeometrycollection.cpp.

◆ geometryType()

QString QgsGeometryCollection::geometryType ( ) const

overridevirtual

Returns a unique string representing the geometry type.

See also: wkbType; wktTypeStr

Implements QgsAbstractGeometry.

Reimplemented in QgsMultiLineString, QgsMultiPoint, QgsMultiCurve, QgsMultiPolygon, and QgsMultiSurface.

Definition at line 266 of file qgsgeometrycollection.cpp.

◆ hasCurvedSegments()

bool QgsGeometryCollection::hasCurvedSegments ( ) const

overridevirtual

Returns true if the geometry contains curved segments.

Reimplemented from QgsAbstractGeometry.

Definition at line 682 of file qgsgeometrycollection.cpp.

◆ insertGeometry()

bool QgsGeometryCollection::insertGeometry	(	QgsAbstractGeometry *	g,
		int	index
	)

virtual

Inserts a geometry before a specified index and takes ownership.

Returns true in case of success.

Parameters

g	geometry to insert. Ownership is transferred to the collection.
index	position to insert geometry before

Reimplemented in QgsMultiPoint, QgsMultiCurve, QgsMultiLineString, QgsMultiSurface, and QgsMultiPolygon.

Definition at line 225 of file qgsgeometrycollection.cpp.

◆ insertVertex()

bool QgsGeometryCollection::insertVertex	(	QgsVertexId	position,
		const QgsPoint &	vertex
	)

overridevirtual

Inserts a vertex into the geometry.

Parameters

position	vertex id for position of inserted vertex
vertex	vertex to insert

Returns: true if insert was successful

See also: moveVertex; deleteVertex

Implements QgsAbstractGeometry.

Definition at line 530 of file qgsgeometrycollection.cpp.

◆ isEmpty()

bool QgsGeometryCollection::isEmpty ( ) const

overridevirtual

Returns true if the geometry is empty.

Reimplemented from QgsAbstractGeometry.

Definition at line 200 of file qgsgeometrycollection.cpp.

◆ length()

double QgsGeometryCollection::length ( ) const

overridevirtual

Returns the length of the geometry.

See also: area(); perimeter()

Reimplemented from QgsAbstractGeometry.

Definition at line 588 of file qgsgeometrycollection.cpp.

◆ moveVertex()

bool QgsGeometryCollection::moveVertex	(	QgsVertexId	position,
		const QgsPoint &	newPos
	)

overridevirtual

Moves a vertex within the geometry.

Parameters

position	vertex id for vertex to move
newPos	new position of vertex

Returns: true if move was successful

See also: insertVertex; deleteVertex

Implements QgsAbstractGeometry.

Definition at line 545 of file qgsgeometrycollection.cpp.

◆ nCoordinates()

int QgsGeometryCollection::nCoordinates ( ) const

overridevirtual

Returns the number of nodes contained in the geometry.

Reimplemented from QgsAbstractGeometry.

Reimplemented in QgsMultiPoint.

Definition at line 481 of file qgsgeometrycollection.cpp.

◆ nextVertex()

bool QgsGeometryCollection::nextVertex	(	QgsVertexId &	id,
		QgsPoint &	vertex
	)		const

overridevirtual

Returns next vertex id and coordinates.

Parameters

id	initial value should be the starting vertex id. The next vertex id will be stored in this variable if found.
vertex	container for found node

Returns: false if at end

Implements QgsAbstractGeometry.

Definition at line 499 of file qgsgeometrycollection.cpp.

◆ numGeometries()

int QgsGeometryCollection::numGeometries ( ) const

Returns the number of geometries within the collection.

Definition at line 184 of file qgsgeometrycollection.cpp.

◆ operator!=()

bool QgsGeometryCollection::operator!= ( const QgsAbstractGeometry & other ) const

overridevirtual

Implements QgsAbstractGeometry.

Definition at line 88 of file qgsgeometrycollection.cpp.

◆ operator=()

QgsGeometryCollection & QgsGeometryCollection::operator= ( const QgsGeometryCollection & c )

Definition at line 46 of file qgsgeometrycollection.cpp.

◆ operator==()

bool QgsGeometryCollection::operator== ( const QgsAbstractGeometry & other ) const

overridevirtual

Implements QgsAbstractGeometry.

Definition at line 67 of file qgsgeometrycollection.cpp.

◆ partCount()

int QgsGeometryCollection::partCount ( ) const

overridevirtual

Returns count of parts contained in the geometry.

See also: vertexCount; ringCount

Implements QgsAbstractGeometry.

Definition at line 764 of file qgsgeometrycollection.cpp.

◆ perimeter()

double QgsGeometryCollection::perimeter ( ) const

overridevirtual

Returns the perimeter of the geometry.

See also: area(); length()

Reimplemented from QgsAbstractGeometry.

Definition at line 610 of file qgsgeometrycollection.cpp.

◆ removeDuplicateNodes()

bool QgsGeometryCollection::removeDuplicateNodes	(	double	epsilon = `4 *DBL_EPSILON`,
		bool	useZValues = `false`
	)

overridevirtual

Removes duplicate nodes from the geometry, wherever removing the nodes does not result in a degenerate geometry.

The epsilon parameter specifies the tolerance for coordinates when determining that vertices are identical.

By default, z values are not considered when detecting duplicate nodes. E.g. two nodes with the same x and y coordinate but different z values will still be considered duplicate and one will be removed. If useZValues is true, then the z values are also tested and nodes with the same x and y but different z will be maintained.

Note that duplicate nodes are not tested between different parts of a multipart geometry. E.g. a multipoint geometry with overlapping points will not be changed by this method.

The function will return true if nodes were removed, or false if no duplicate nodes were found.

Since: QGIS 3.0

Implements QgsAbstractGeometry.

Definition at line 131 of file qgsgeometrycollection.cpp.

◆ removeGeometry()

bool QgsGeometryCollection::removeGeometry ( int nr )

virtual

Removes a geometry from the collection.

Parameters

nr	index of geometry to remove

Returns: true if removal was successful.

Definition at line 239 of file qgsgeometrycollection.cpp.

◆ ringCount()

int QgsGeometryCollection::ringCount ( int part = 0 ) const

overridevirtual

Returns the number of rings of which this geometry is built.

Implements QgsAbstractGeometry.

Definition at line 754 of file qgsgeometrycollection.cpp.

◆ segmentize()

QgsAbstractGeometry * QgsGeometryCollection::segmentize	(	double	tolerance = `M_PI_2 / 90`,
		SegmentationToleranceType	toleranceType = `MaximumAngle`
	)		const

overridevirtual

Returns a geometry without curves.

Caller takes ownership

Parameters

tolerance	segmentation tolerance
toleranceType	maximum segmentation angle or maximum difference between approximation and curve

Reimplemented from QgsAbstractGeometry.

Definition at line 695 of file qgsgeometrycollection.cpp.

◆ segmentLength()

double QgsGeometryCollection::segmentLength ( QgsVertexId startVertex ) const

overridevirtual

Returns the length of the segment of the geometry which begins at startVertex.

Since: QGIS 3.0

Implements QgsAbstractGeometry.

Reimplemented in QgsMultiPoint.

Definition at line 728 of file qgsgeometrycollection.cpp.

◆ snappedToGrid()

QgsGeometryCollection * QgsGeometryCollection::snappedToGrid	(	double	hSpacing,
		double	vSpacing,
		double	dSpacing = `0`,
		double	mSpacing = `0`
	)		const

overridevirtual

Makes a new geometry with all the points or vertices snapped to the closest point of the grid.

Ownership is transferred to the caller.

If the gridified geometry could not be calculated a nullptr will be returned. It may generate an invalid geometry (in some corner cases). It can also be thought as rounding the edges and it may be useful for removing errors. Example:

geometry->snappedToGrid(1, 1);

In this case we use a 2D grid of 1x1 to gridify. In this case, it can be thought like rounding the x and y of all the points/vertices to full units (remove all decimals).

Parameters

hSpacing	Horizontal spacing of the grid (x axis). 0 to disable.
vSpacing	Vertical spacing of the grid (y axis). 0 to disable.
dSpacing	Depth spacing of the grid (z axis). 0 (default) to disable.
mSpacing	Custom dimension spacing of the grid (m axis). 0 (default) to disable.

Since: 3.0

Implements QgsAbstractGeometry.

Definition at line 112 of file qgsgeometrycollection.cpp.

◆ toCurveType()

QgsGeometryCollection * QgsGeometryCollection::toCurveType ( ) const

overridevirtual

Returns the geometry converted to the more generic curve type.

E.g. QgsLineString -> QgsCompoundCurve, QgsPolygon -> QgsCurvePolygon, QgsMultiLineString -> QgsMultiCurve, QgsMultiPolygon -> QgsMultiSurface

Returns: the converted geometry. Caller takes ownership

Implements QgsAbstractGeometry.

Reimplemented in QgsMultiLineString, QgsMultiPolygon, QgsMultiCurve, QgsMultiPoint, and QgsMultiSurface.

Definition at line 833 of file qgsgeometrycollection.cpp.

◆ transform() [1/2]

void QgsGeometryCollection::transform	(	const QgsCoordinateTransform &	ct,
		QgsCoordinateTransform::TransformDirection	d = `QgsCoordinateTransform::ForwardTransform`,
		bool	transformZ = `false`
	)

overridevirtual

Transforms the geometry using a coordinate transform.

Parameters

ct	coordinate transform
d	transformation direction
transformZ	set to true to also transform z coordinates. This requires that the z coordinates in the geometry represent height relative to the vertical datum of the source CRS (generally ellipsoidal heights) and are expressed in its vertical units (generally meters). If false, then z coordinates will not be changed by the transform.

Implements QgsAbstractGeometry.

Definition at line 271 of file qgsgeometrycollection.cpp.

◆ transform() [2/2]

void QgsGeometryCollection::transform	(	const QTransform &	t,
		double	zTranslate = `0.0`,
		double	zScale = `1.0`,
		double	mTranslate = `0.0`,
		double	mScale = `1.0`
	)

overridevirtual

Transforms the x and y components of the geometry using a QTransform object t.

Optionally, the geometry's z values can be scaled via zScale and translated via zTranslate. Similarly, m-values can be scaled via mScale and translated via mTranslate.

Implements QgsAbstractGeometry.

Definition at line 280 of file qgsgeometrycollection.cpp.

◆ vertexAngle()

double QgsGeometryCollection::vertexAngle ( QgsVertexId vertex ) const

overridevirtual

Returns approximate angle at a vertex.

This is usually the average angle between adjacent segments, and can be pictured as the orientation of a line following the curvature of the geometry at the specified vertex.

Parameters

vertex the vertex id

Returns: rotation in radians, clockwise from north

Implements QgsAbstractGeometry.

Definition at line 712 of file qgsgeometrycollection.cpp.

◆ vertexAt()

QgsPoint QgsGeometryCollection::vertexAt ( QgsVertexId id ) const

overridevirtual

Returns the point corresponding to a specified vertex id.

Implements QgsAbstractGeometry.

Definition at line 769 of file qgsgeometrycollection.cpp.

◆ vertexCount()

int QgsGeometryCollection::vertexCount	(	int	part = `0`,
		int	ring = `0`
	)		const

overridevirtual

Returns the number of vertices of which this geometry is built.

Implements QgsAbstractGeometry.

Definition at line 744 of file qgsgeometrycollection.cpp.

◆ vertexNumberFromVertexId()

int QgsGeometryCollection::vertexNumberFromVertexId ( QgsVertexId id ) const

overridevirtual

Returns the vertex number corresponding to a vertex id.

The vertex numbers start at 0, so a return value of 0 corresponds to the first vertex.

Returns -1 if a corresponding vertex could not be found.

Since: QGIS 3.0

Implements QgsAbstractGeometry.

Reimplemented in QgsMultiPoint.

Definition at line 158 of file qgsgeometrycollection.cpp.

◆ wktOmitChildType()

bool QgsGeometryCollection::wktOmitChildType ( ) const

protectedvirtual

Returns whether child type names are omitted from Wkt representations of the collection.

Since: QGIS 2.12

Reimplemented in QgsMultiLineString, QgsMultiPoint, and QgsMultiPolygon.

Definition at line 843 of file qgsgeometrycollection.cpp.

Member Data Documentation

◆ mGeometries

QVector< QgsAbstractGeometry * > QgsGeometryCollection::mGeometries

protected

Definition at line 169 of file qgsgeometrycollection.h.

The documentation for this class was generated from the following files:

/tmp/buildd/qgis-3.0.2+14stretch/src/core/geometry/qgsgeometrycollection.h
/tmp/buildd/qgis-3.0.2+14stretch/src/core/geometry/qgsgeometrycollection.cpp

Public Member Functions

Protected Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ QgsGeometryCollection() [1/2]

◆ QgsGeometryCollection() [2/2]

◆ ~QgsGeometryCollection()

Member Function Documentation

◆ addGeometry()

◆ addMValue()

◆ addZValue()

◆ adjacentVertices()

◆ area()

◆ asGml2()

◆ asGml3()

◆ asJson()

◆ asWkb()

◆ asWkt()

◆ boundary()

◆ boundingBox()

◆ calculateBoundingBox()

◆ cast()

◆ childCount()

◆ childGeometry()

◆ clear()

◆ clearCache()

◆ clone()

◆ closestSegment()

◆ coordinateSequence()

◆ createEmptyWithSameType()

◆ deleteVertex()

◆ dimension()

◆ draw()

◆ dropMValue()

◆ dropZValue()

◆ fromCollectionWkt()

◆ fromWkb()

◆ fromWkt()

◆ geometryN() [1/2]

◆ geometryN() [2/2]

◆ geometryType()

◆ hasCurvedSegments()

◆ insertGeometry()

◆ insertVertex()

◆ isEmpty()

◆ length()

◆ moveVertex()

◆ nCoordinates()

◆ nextVertex()

◆ numGeometries()

◆ operator!=()

◆ operator=()

◆ operator==()

◆ partCount()

◆ perimeter()

◆ removeDuplicateNodes()

◆ removeGeometry()

◆ ringCount()

◆ segmentize()

◆ segmentLength()

◆ snappedToGrid()

◆ toCurveType()

◆ transform() [1/2]

◆ transform() [2/2]

◆ vertexAngle()

◆ vertexAt()

◆ vertexCount()

◆ vertexNumberFromVertexId()

◆ wktOmitChildType()

Member Data Documentation

◆ mGeometries