*************** Getting Started *************** .. only:: html .. contents:: :local: :depth: 3 Installation on Debian-based systems ==================================== .. index:: Debian, Ubuntu We will give a short and simple installation how-to for a minimal working configuration on Debian based systems (including Ubuntu and derivatives). However, many other distributions and OSs provide packages for QGIS Server. .. note:: In Ubuntu you can use your regular user, prepending ``sudo`` to commands requiring admin permissions. In Debian you can work as admin (``root``), without using ``sudo``. Requirements and steps to add official QGIS repositories to install QGIS Server on a Debian based system are provided in `QGIS installers page `_. You may want to install at least the latest Long Term Release. Once the target version repository is configured and QGIS Server installed, you can test the installation with: .. code-block:: bash /usr/lib/cgi-bin/qgis_mapserv.fcgi If you get the following output, the server is correctly installed. .. note:: Depending on the version of QGIS, you might see slightly different output reported when you run ``qgis_mapserv.fcgi``. .. code-block:: QFSFileEngine::open: No file name specified Warning 1: Unable to find driver ECW to unload from GDAL_SKIP environment variable. Warning 1: Unable to find driver ECW to unload from GDAL_SKIP environment variable. Warning 1: Unable to find driver JP2ECW to unload from GDAL_SKIP environment variable. Warning 1: Unable to find driver ECW to unload from GDAL_SKIP environment variable. Warning 1: Unable to find driver JP2ECW to unload from GDAL_SKIP environment variable. Content-Length: 206 Content-Type: text/xml; charset=utf-8 Service unknown or unsupported .. note:: As seen below, QGIS reports a Status 400 code, which correctly identifies the request has failed because there is no active http session. This is not a bug and indicates the server is functioning properly. .. code-block:: Application path not initialized Application path not initialized Warning 1: Unable to find driver ECW to unload from GDAL_SKIP environment variable. Warning 1: Unable to find driver ECW to unload from GDAL_SKIP environment variable. Warning 1: Unable to find driver JP2ECW to unload from GDAL_SKIP environment variable. "Loading native module /usr/lib/qgis/server/libdummy.so" "Loading native module /usr/lib/qgis/server/liblandingpage.so" "Loading native module /usr/lib/qgis/server/libwcs.so" "Loading native module /usr/lib/qgis/server/libwfs.so" "Loading native module /usr/lib/qgis/server/libwfs3.so" "Loading native module /usr/lib/qgis/server/libwms.so" "Loading native module /usr/lib/qgis/server/libwmts.so" QFSFileEngine::open: No file name specified Content-Length: 102 Content-Type: application/json Server: QGIS FCGI server - QGIS version 3.16.6-Hannover Status: 400 [{"code":"Bad request error","description":"Requested URI does not match any registered API handler"}] Let's add a sample project. You can use your own, or one from `Training demo data `_: .. code-block:: bash mkdir /home/qgis/projects/ cd /home/qgis/projects/ wget https://github.com/qgis/QGIS-Training-Data/archive/release_3.16.zip unzip release_3.16.zip mv QGIS-Training-Data-release_3.16/exercise_data/qgis-server-tutorial-data/world.qgs . mv QGIS-Training-Data-release_3.16/exercise_data/qgis-server-tutorial-data/naturalearth.sqlite . Of course, you can use your favorite GIS software to open this file and take a look at the configuration and available layers. To properly deploy QGIS server you need a HTTP server. Recommended choices are **Apache** or **NGINX**. .. index:: Apache, mod_fcgid .. _`httpserver`: Apache HTTP Server ------------------ .. note:: In the following, please replace ``qgis.demo`` with the name or IP address of your server. Install Apache and `mod_fcgid `_: .. code-block:: bash apt install apache2 libapache2-mod-fcgid You can run QGIS Server on your default website, or configure a virtualhost specifically for this, as follows. In the :file:`/etc/apache2/sites-available` directory let's create a file called :file:`qgis.demo.conf`, with this content: .. code-block:: apacheconf ServerAdmin webmaster@localhost ServerName qgis.demo DocumentRoot /var/www/html # Apache logs (different than QGIS Server log) ErrorLog ${APACHE_LOG_DIR}/qgis.demo.error.log CustomLog ${APACHE_LOG_DIR}/qgis.demo.access.log combined # Longer timeout for WPS... default = 40 FcgidIOTimeout 120 FcgidInitialEnv LC_ALL "en_US.UTF-8" FcgidInitialEnv PYTHONIOENCODING UTF-8 FcgidInitialEnv LANG "en_US.UTF-8" # QGIS log FcgidInitialEnv QGIS_SERVER_LOG_STDERR 1 FcgidInitialEnv QGIS_SERVER_LOG_LEVEL 0 # default QGIS project SetEnv QGIS_PROJECT_FILE /home/qgis/projects/world.qgs # QGIS_AUTH_DB_DIR_PATH must lead to a directory writeable by the Server's FCGI process user FcgidInitialEnv QGIS_AUTH_DB_DIR_PATH "/home/qgis/qgisserverdb/" FcgidInitialEnv QGIS_AUTH_PASSWORD_FILE "/home/qgis/qgisserverdb/qgis-auth.db" # Set pg access via pg_service file SetEnv PGSERVICEFILE /home/qgis/.pg_service.conf FcgidInitialEnv PGPASSFILE "/home/qgis/.pgpass" # if qgis-server is installed from packages in debian based distros this is usually /usr/lib/cgi-bin/ # run "locate qgis_mapserv.fcgi" if you don't know where qgis_mapserv.fcgi is ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ AllowOverride None Options +ExecCGI -MultiViews -SymLinksIfOwnerMatch Order allow,deny Allow from all Require all granted FcgidMaxRequestLen 26214400 FcgidConnectTimeout 60 Further readings: * :ref:`QGIS Server logging ` * :ref:`pg-service-file in QGIS Server ` You can do the above in a linux Desktop system by pasting and saving the above configuration after doing: .. code-block:: bash nano /etc/apache2/sites-available/qgis.demo.conf .. note:: Some of the configuration options are explained in the Server :ref:`environment variables ` section. Let's now create the directories that will store the QGIS Server logs and the authentication database: .. code-block:: bash mkdir -p /var/log/qgis/ chown www-data:www-data /var/log/qgis mkdir -p /home/qgis/qgisserverdb chown www-data:www-data /home/qgis/qgisserverdb .. note:: ``www-data`` is the Apache user on Debian based systems and we need Apache to have access to those locations or files. The ``chown www-data...`` commands change the owner of the respective directories and files to ``www-data``. We can now enable the `virtual host `_, enable the ``fcgid`` mod if it's not already enabled: .. code-block:: bash a2enmod fcgid a2ensite qgis.demo Now restart Apache for the new configuration to be taken into account: .. code-block:: bash systemctl restart apache2 Now that Apache knows that he should answer requests to http://qgis.demo we also need to setup the client system so that it knows who ``qgis.demo`` is. We do that by adding ``127.0.0.1 qgis.demo`` in the `hosts `_ file. We can do it with ``sh -c "echo '127.0.0.1 qgis.demo' >> /etc/hosts"``. Replace ``127.0.0.1`` with the IP of your server. .. note:: Remember that both the :file:`qgis.demo.conf` and :file:`/etc/hosts` files should be configured for your setup to work. You can also test the access to your QGIS Server from other clients on the network (e.g. Windows or macOS machines) by going to their :file:`/etc/hosts` file and point the ``myhost`` name to whatever IP the server machine has on the network (not ``127.0.0.1`` as it is the local IP, only accessible from the local machine). On ``*nix`` machines the :file:`hosts` file is located in :file:`/etc`, while on Windows it's under the :file:`C:\\Windows\\System32\\drivers\\etc` directory. Under Windows you need to start your text editor with administrator privileges before opening the hosts file. QGIS Server is now available at http://qgis.demo. To check, type in a browser, as in the simple case: :: http://qgis.demo/cgi-bin/qgis_mapserv.fcgi?SERVICE=WMS&VERSION=1.3.0&REQUEST=GetCapabilities .. index:: nginx, spawn-fcgi, fcgiwrap NGINX HTTP Server ----------------- .. note:: In the following, please replace ``qgis.demo`` with the name or IP address of your server. You can also use QGIS Server with `NGINX `_. Unlike Apache, NGINX does not automatically spawn FastCGI processes. The FastCGI processes are to be started by something else. Install NGINX: .. code-block:: bash apt install nginx * As a first option, you can use **spawn-fcgi** or **fcgiwrap** to start and manage the QGIS Server processes. Official Debian packages exist for both. When you have no X server running and you need, for example, printing, you can use :ref:`xvfb `. * Another option is to rely on **Systemd**, the init system for GNU/Linux that most Linux distributions use today. One of the advantages of this method is that it requires no other components or processes. It’s meant to be simple, yet robust and efficient for production deployments. NGINX Configuration ................... The **include fastcgi_params;** used in the previous configuration is important, as it adds the parameters from :file:`/etc/nginx/fastcgi_params`: .. code-block:: nginx fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param REQUEST_SCHEME $scheme; fastcgi_param HTTPS $https if_not_empty; fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx/$nginx_version; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; # PHP only, required if PHP was built with --enable-force-cgi-redirect fastcgi_param REDIRECT_STATUS 200; Moreover, you can use some :ref:`qgis-server-envvar` to configure QGIS Server. In the NGINX configuration file, :file:`/etc/nginx/nginx.conf`, you have to use ``fastcgi_param`` instruction to define these variables as shown below: .. code-block:: nginx location /qgisserver { gzip off; include fastcgi_params; fastcgi_param QGIS_SERVER_LOG_STDERR 1; fastcgi_param QGIS_SERVER_LOG_LEVEL 0; fastcgi_pass unix:/var/run/qgisserver.socket; } FastCGI wrappers ................ .. warning:: **fcgiwrap** is easier to set up than **spawn-fcgi**, because it's already wrapped in a Systemd service. But it also leads to a solution that is much slower than using spawn-fcgi. With fcgiwrap, a new QGIS Server process is created on each request, meaning that the QGIS Server initialization process, which includes reading and parsing the QGIS project file, is done on each request. With spawn-fcgi, the QGIS Server process remains alive between requests, resulting in much better performance. For that reason, spawn-fcgi is recommended for production use. spawn-fcgi ^^^^^^^^^^ If you want to use `spawn-fcgi `_, the first step is to install the package: .. code-block:: bash apt install spawn-fcgi Then, introduce the following block in your NGINX server configuration: .. code-block:: nginx location /qgisserver { gzip off; include fastcgi_params; fastcgi_pass unix:/var/run/qgisserver.socket; } And restart NGINX to take into account the new configuration: .. code-block:: bash systemctl restart nginx Finally, considering that there is no default service file for spawn-fcgi, you have to manually start QGIS Server in your terminal: .. code-block:: bash spawn-fcgi -s /var/run/qgisserver.socket \ -U www-data -G www-data -n \ /usr/lib/cgi-bin/qgis_mapserv.fcgi QGIS Server is now available at http://qgis.demo/qgisserver. .. note:: When using spawn-fcgi, you may directly define environment variables before running the server. For example: ``export QGIS_SERVER_LOG_STDERR=1`` Of course, you can add an init script to start QGIS Server at boot time or whenever you want. For example with **systemd**, edit the file :file:`/etc/systemd/system/qgis-server.service` with this content: .. code-block:: ini [Unit] Description=QGIS server After=network.target [Service] ;; set env var as needed ;Environment="LANG=en_EN.UTF-8" ;Environment="QGIS_SERVER_PARALLEL_RENDERING=1" ;Environment="QGIS_SERVER_MAX_THREADS=12" ;Environment="QGIS_SERVER_LOG_LEVEL=0" ;Environment="QGIS_SERVER_LOG_STDERR=1" ;; or use a file: ;EnvironmentFile=/etc/qgis-server/env ExecStart=spawn-fcgi -s /var/run/qgisserver.socket -U www-data -G www-data -n /usr/lib/cgi-bin/qgis_mapserv.fcgi [Install] WantedBy=multi-user.target Then enable and start the service: .. code-block:: bash systemctl enable --now qgis-server .. warning:: With the above commands spawn-fcgi spawns only one QGIS Server process. fcgiwrap ^^^^^^^^ Using `fcgiwrap `_ is much easier to setup than **spawn-fcgi** but it's much slower. You first have to install the corresponding package: .. code-block:: bash apt install fcgiwrap Then, introduce the following block in your NGINX server configuration: .. code-block:: nginx :linenos: location /qgisserver { gzip off; include fastcgi_params; fastcgi_pass unix:/var/run/fcgiwrap.socket; fastcgi_param SCRIPT_FILENAME /usr/lib/cgi-bin/qgis_mapserv.fcgi; } Finally, restart NGINX and **fcgiwrap** to take into account the new configuration: .. code-block:: bash systemctl restart nginx systemctl restart fcgiwrap QGIS Server is now available at http://qgis.demo/qgisserver. Systemd ....... QGIS Server needs a running X Server to be fully usable, in particular for printing. In the case you already have a running X Server, you can use systemd services. This method, to deploy QGIS Server, relies on two Systemd units: * a `Socket unit `_ * and a `Service unit `_. The **QGIS Server Socket unit** defines and creates a file system socket, used by NGINX to start and communicate with QGIS Server. The Socket unit has to be configured with ``Accept=false``, meaning that the calls to the ``accept()`` system call are delegated to the process created by the Service unit. It is located in :file:`/etc/systemd/system/qgis-server@.socket`, which is actually a template: .. code-block:: ini [Unit] Description=QGIS Server Listen Socket (instance %i) [Socket] Accept=false ListenStream=/var/run/qgis-server-%i.sock SocketUser=www-data SocketGroup=www-data SocketMode=0600 [Install] WantedBy=sockets.target Now enable and start sockets: .. code-block:: bash for i in 1 2 3 4; do systemctl enable --now qgis-server@$i.socket; done The **QGIS Server Service unit** defines and starts the QGIS Server process. The important part is that the Service process’ standard input is connected to the socket defined by the Socket unit. This has to be configured using ``StandardInput=socket`` in the Service unit configuration located in :file:`/etc/systemd/system/qgis-server@.service`: .. code-block:: ini [Unit] Description=QGIS Server Service (instance %i) [Service] User=www-data Group=www-data StandardOutput=null StandardError=journal StandardInput=socket ExecStart=/usr/lib/cgi-bin/qgis_mapserv.fcgi EnvironmentFile=/etc/qgis-server/env [Install] WantedBy=multi-user.target .. note:: The QGIS Server :ref:`environment variables ` are defined in a separate file, :file:`/etc/qgis-server/env`. It could look like this: .. code-block:: make QGIS_PROJECT_FILE=/etc/qgis/myproject.qgs QGIS_SERVER_LOG_STDERR=1 QGIS_SERVER_LOG_LEVEL=3 Now start socket service: .. code-block:: bash for i in 1 2 3 4; do systemctl enable --now qgis-server@$i.service; done Finally, for the NGINX HTTP server, lets introduce the configuration for this setup: .. code-block:: nginx upstream qgis-server_backend { server unix:/var/run/qgis-server-1.sock; server unix:/var/run/qgis-server-2.sock; server unix:/var/run/qgis-server-3.sock; server unix:/var/run/qgis-server-4.sock; } server { … location /qgis-server { gzip off; include fastcgi_params; fastcgi_pass qgis-server_backend; } } Now restart NGINX for the new configuration to be taken into account: .. code-block:: bash systemctl restart nginx Thanks to Oslandia for sharing `their tutorial `_. .. _xvfb: Xvfb ---- QGIS Server needs a running X Server to be fully usable, in particular for printing. On servers it is usually recommended not to install it, so you may use ``xvfb`` to have a virtual X environment. If you're running the Server in graphic/X11 environment then there is no need to install xvfb. More info at https://www.itopen.it/qgis-server-setup-notes/. To install the package: .. code-block:: bash apt install xvfb Create the service file, :file:`/etc/systemd/system/xvfb.service`, with this content: .. code-block:: ini [Unit] Description=X Virtual Frame Buffer Service After=network.target [Service] ExecStart=/usr/bin/Xvfb :99 -screen 0 1024x768x24 -ac +extension GLX +render -noreset [Install] WantedBy=multi-user.target Enable, start and check the status of the ``xvfb.service``: .. code-block:: bash systemctl enable --now xvfb.service systemctl status xvfb.service Then, according to your HTTP server, you should configure the **DISPLAY** parameter or directly use **xvfb-run**. With Apache ........... Then you can configure the **DISPLAY** parameter. With Apache you just add to your *FastCGI* configuration (see above): .. code-block:: apache FcgidInitialEnv DISPLAY ":99" Now restart Apache for the new configuration to be taken into account: .. code-block:: bash systemctl restart apache2 With NGINX .......... Then you can directly use **xvfb-run** or configure the **DISPLAY** parameter. * With spawn-fcgi using ``xvfb-run``: .. code-block:: bash xvfb-run /usr/bin/spawn-fcgi -f /usr/lib/cgi-bin/qgis_mapserv.fcgi \ -s /tmp/qgisserver.socket \ -G www-data -U www-data -n * With the **DISPLAY** environment variable in the HTTP server configuration. .. code-block:: nginx fastcgi_param DISPLAY ":99"; Installation on Windows ======================= .. index:: Windows QGIS Server can also be installed on Windows systems. While the QGIS Server package is available in the 64 bit version of the OSGeo4W network installer (https://qgis.org/en/site/forusers/download.html) there is no Apache (or other web server) package available, so this must be installed by other means. A simple procedure is the following: #. Download the XAMPP installer (https://www.apachefriends.org/download.html) for Windows and install Apache .. figure:: img/qgis_server_windows1.png :align: center #. Download the OSGeo4W installer, follow the "Advanced Install" and install both the QGIS Desktop and QGIS Server packages .. figure:: img/qgis_server_windows2.png :align: center #. Edit the httpd.conf file (:file:`C:\\xampp\\apache\\conf\\httpd.conf` if the default installation paths have been used) and make the following changes: From: .. code-block:: apache ScriptAlias /cgi-bin/ "C:/xampp/cgi-bin/" To: .. code-block:: apache ScriptAlias /cgi-bin/ "C:/OSGeo4W64/apps/qgis/bin/" From: .. code-block:: apache AllowOverride None Options None Require all granted To: .. code-block:: apache SetHandler cgi-script AllowOverride None Options ExecCGI Order allow,deny Allow from all Require all granted From: .. code-block:: apache AddHandler cgi-script .cgi .pl .asp To: .. code-block:: apache AddHandler cgi-script .cgi .pl .asp .exe #. Then at the bottom of httpd.conf add: .. code-block:: apache SetEnv GDAL_DATA "C:\OSGeo4W64\share\gdal" SetEnv QGIS_AUTH_DB_DIR_PATH "C:\OSGeo4W64\apps\qgis\resources" SetEnv PYTHONHOME "C:\OSGeo4W64\apps\Python37" SetEnv PATH "C:\OSGeo4W64\bin;C:\OSGeo4W64\apps\qgis\bin;C:\OSGeo4W64\apps\Qt5\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem" SetEnv QGIS_PREFIX_PATH "C:\OSGeo4W64\apps\qgis" SetEnv QT_PLUGIN_PATH "C:\OSGeo4W64\apps\qgis\qtplugins;C:\OSGeo4W64\apps\Qt5\plugins" #. Restart the Apache web server from the XAMPP Control Panel and open browser window to testing a GetCapabilities request to QGIS Server :: http://qgis.demo/cgi-bin/qgis_mapserv.fcgi.exe?SERVICE=WMS&VERSION=1.3.0&REQUEST=GetCapabilities Serve a project =============== Now that QGIS Server is installed and running, we just have to use it. Obviously, we need a QGIS project to work on. Of course, you can fully customize your project by defining contact information, precise some restrictions on CRS or even exclude some layers. Everything you need to know about that is described later in :ref:`Creatingwmsfromproject`. But for now, we are going to use a simple project already configured and previously downloaded in :file:`/home/qgis/projects/world.qgs`, as described above. By opening the project and taking a quick look on layers, we know that 4 layers are currently available: - airports - places - countries - countries_shapeburst You don't have to understand the full request for now but you may retrieve a map with some of the previous layers thanks to QGIS Server by doing something like this in your web browser to retrieve the *countries* layer: .. code-block:: bash http://qgis.demo/qgisserver? MAP=/home/qgis/projects/world.qgs& LAYERS=countries& SERVICE=WMS& VERSION=1.3.0& REQUEST=GetMap& CRS=EPSG:4326& WIDTH=400& HEIGHT=200& BBOX=-90,-180,90,180 If you obtain the next image, then QGIS Server is running correctly: .. figure:: img/server_basic_getmap.png :align: center Server response to a basic GetMap request Note that you may define **QGIS_PROJECT_FILE** environment variable to use a project by default instead of giving a **MAP** parameter (see :ref:`qgis-server-envvar`). For example with spawn-fcgi: .. code-block:: bash export QGIS_PROJECT_FILE=/home/qgis/projects/world.qgs spawn-fcgi -f /usr/lib/bin/cgi-bin/qgis_mapserv.fcgi \ -s /var/run/qgisserver.socket \ -U www-data -G www-data -n .. _`Creatingwmsfromproject`: Configure your project ====================== To provide a new QGIS Server WMS, WFS or WCS, you have to create a QGIS project file with some data or use one of your current project. Define the colors and styles of the layers in QGIS and the project CRS, if not already defined. .. _figure_server_definitions: .. figure:: img/ows_server_definition.png :align: center Definitions for a QGIS Server WMS/WFS/WCS project Then, go to the :guilabel:`QGIS Server` menu of the :menuselection:`Project --> Properties...` dialog and provide some information about the OWS in the fields under :guilabel:`Service Capabilities`. This will appear in the GetCapabilities response of the WMS, WFS or WCS. If you don't check |checkbox| :guilabel:`Service capabilities`, QGIS Server will use the information given in the :file:`wms_metadata.xml` file located in the :file:`cgi-bin` folder. WMS capabilities ---------------- In the :guilabel:`WMS capabilities` section, you can define the extent advertised in the WMS GetCapabilities response by entering the minimum and maximum X and Y values in the fields under :guilabel:`Advertised extent`. Clicking :guilabel:`Use Current Canvas Extent` sets these values to the extent currently displayed in the QGIS map canvas. By checking |checkbox| :guilabel:`CRS restrictions`, you can restrict in which coordinate reference systems (CRS) QGIS Server will offer to render maps. It is recommended that you restrict the offered CRS as this reduces the size of the WMS GetCapabilities response. Use the |symbologyAdd| button below to select those CRSs from the Coordinate Reference System Selector, or click :guilabel:`Used` to add the CRSs used in the QGIS project to the list. If you have print layouts defined in your project, they will be listed in the ``GetProjectSettings`` response, and they can be used by the GetPrint request to create prints, using one of the print layouts as a template. This is a QGIS-specific extension to the WMS 1.3.0 specification. If you want to exclude any print layout from being published by the WMS, check |checkbox| :guilabel:`Exclude layouts` and click the |symbologyAdd| button below. Then, select a print layout from the :guilabel:`Select print layout` dialog in order to add it to the excluded layouts list. If you want to exclude any layer or layer group from being published by the WMS, check |checkbox| :guilabel:`Exclude Layers` and click the |symbologyAdd| button below. This opens the :guilabel:`Select restricted layers and groups` dialog, which allows you to choose the layers and groups that you don't want to be published. Use the :kbd:`Shift` or :kbd:`Ctrl` key if you want to select multiple entries. It is recommended that you exclude from publishing the layers that you don't need as this reduces the size of the WMS GetCapabilities response which leads to faster loading times on the client side. If you check |checkbox| :guilabel:`Use layer ids as name`, layer ids will be used to reference layers in the ``GetCapabilities`` response or ``GetMap LAYERS`` parameter. If not, layer name or short name if defined (see :ref:`vectorservermenu`) is used. You can receive requested GetFeatureInfo as plain text, XML and GML. The default is XML. .. _`addGeometryToFeatureResponse` : If you wish, you can check |checkbox| :guilabel:`Add geometry to feature response`. This will include the bounding box for each feature in the GetFeatureInfo response. See also the :ref:`WITH_GEOMETRY ` parameter. As many web clients can’t display circular arcs in geometries you have the option to segmentize the geometry before sending it to the client in a GetFeatureInfo response. This allows such clients to still display a feature’s geometry (e.g. for highlighting the feature). You need to check the |checkbox| :guilabel:`Segmentize feature info geometry` to activate the option. You can also use the :guilabel:`GetFeatureInfo geometry precision` option to set the precision of the GetFeatureInfo geometry. This enables you to save bandwidth when you don't need the full precision. If you want QGIS Server to advertise specific request URLs in the WMS GetCapabilities response, enter the corresponding URL in the :guilabel:`Advertised URL` field. Furthermore, you can restrict the maximum size of the maps returned by the GetMap request by entering the maximum width and height into the respective fields under :guilabel:`Maximums for GetMap request`. You can change the :guilabel:`Quality for JPEG images` factor. The quality factor must be in the range 0 to 100. Specify 0 for maximum compression, 100 for no compression. You can change the limit for atlas features to be printed in one request by setting the :guilabel:`Maximum features for Atlas print requests` field. When QGIS Server is used in tiled mode (see :ref:`TILED parameter `), you can set the :guilabel:`Tile buffer in pixels`. The recommended value is the size of the largest symbol or line width in your QGIS project. If one of your layers uses the :ref:`Map Tip display ` (i.e. to show text using expressions) this will be listed inside the GetFeatureInfo output. If the layer uses a Value Map for one of its attributes, this information will also be shown in the GetFeatureInfo output. WFS capabilities ---------------- In the :guilabel:`WFS capabilities` area you can select the layers you want to publish as WFS, and specify if they will allow update, insert and delete operations. If you enter a URL in the :guilabel:`Advertised URL` field of the :guilabel:`WFS capabilities` section, QGIS Server will advertise this specific URL in the WFS GetCapabilities response. WCS capabilities ---------------- In the :guilabel:`WCS capabilities` area, you can select the layers that you want to publish as WCS. If you enter a URL in the :guilabel:`Advertised URL` field of the :guilabel:`WCS capabilities` section, QGIS Server will advertise this specific URL in the WCS GetCapabilities response. Fine tuning your OWS ---------------------- For vector layers, the :guilabel:`Fields` menu of the :menuselection:`Layer --> Layer Properties` dialog allows you to define for each attribute if it will be published or not. By default, all the attributes are published by your WMS and WFS. If you don't want a specific attribute to be published, uncheck the corresponding checkbox in the :guilabel:`WMS` or :guilabel:`WFS` column. You can overlay watermarks over the maps produced by your WMS by adding text annotations or SVG annotations to the project file. See the :ref:`sec_annotations` section for instructions on creating annotations. For annotations to be displayed as watermarks on the WMS output, the :guilabel:`Fixed map position` checkbox in the :guilabel:`Annotation text` dialog must be unchecked. This can be accessed by double clicking the annotation while one of the annotation tools is active. For SVG annotations, you will need either to set the project to save absolute paths (in the :guilabel:`General` menu of the :menuselection:`Project --> Properties...` dialog) or to manually modify the path to the SVG image so that it represents a valid relative path. Integration with third parties ============================== QGIS Server provides standard OGC web services like `WMS, WFS, etc. `_ thus it can be used by a wide variety of end user tools. Integration with QGIS Desktop ----------------------------- QGIS Desktop is the map designer where QGIS Server is the map server. The maps or QGIS projects will be served by the QGIS Server to provide OGC standards. These QGIS projects can either be files or entries in a database (by using :menuselection:`Project --> Save to --> PostgreSQL` in QGIS Desktop). Furthermore, dedicated update workflow must be established to refresh a project used by a QGIS Server (ie. copy project files into server location and restart QGIS Server). For now, automated processes (as server reloading over message queue service) are not implemented yet. Integration with MapProxy ------------------------- `MapProxy `_ is a tile cache server and as it can read and serve any WMS/WMTS map server, it can be directly connected to QGIS server web services and improve end user experience. Integration with QWC2 --------------------- `QWC2 `_ is a responsive web application dedicated to QGIS Server. It helps you to build a highly customized map viewer with layer selection, feature info, etc.. Also many plugins are available like authentication or print service, the full list is available is this `repository `_. .. Substitutions definitions - AVOID EDITING PAST THIS LINE This will be automatically updated by the find_set_subst.py script. If you need to create a new substitution manually, please add it also to the substitutions.txt file in the source folder. .. |checkbox| image:: /static/common/checkbox.png :width: 1.3em .. |symbologyAdd| image:: /static/common/symbologyAdd.png :width: 1.5em