QGIS API Documentation  3.9.0-Master (224899f119)
Public Member Functions | Protected Attributes | List of all members
QgsLabelFeature Class Reference

The QgsLabelFeature class describes a feature that should be used within the labeling engine. More...

#include <qgslabelfeature.h>

Inheritance diagram for QgsLabelFeature:
Inheritance graph
[legend]

Public Member Functions

 QgsLabelFeature (QgsFeatureId id, geos::unique_ptr geometry, QSizeF size)
 Create label feature, takes ownership of the geometry instance. More...
 
virtual ~QgsLabelFeature ()
 Clean up geometry and curved label info (if present) More...
 
bool alwaysShow () const
 Whether label should be always shown (sets very high label priority) More...
 
pal::LineArrangementFlags arrangementFlags () const
 Returns the feature's arrangement flags. More...
 
pal::LabelInfocurvedLabelInfo () const
 Gets additional infor required for curved label placement. Returns nullptr if not set. More...
 
double distLabel () const
 Applies to "around point" placement strategy or linestring features. More...
 
QgsFeature feature () const
 Returns the original feature associated with this label. More...
 
double fixedAngle () const
 Angle in degrees of the fixed angle (relevant only if hasFixedAngle() returns true) More...
 
QgsPointXY fixedPosition () const
 Coordinates of the fixed position (relevant only if hasFixedPosition() returns true) More...
 
GEOSGeometry * geometry () const
 Gets access to the associated geometry. More...
 
bool hasFixedAngle () const
 Whether the label should use a fixed angle instead of using angle from automatic placement. More...
 
bool hasFixedPosition () const
 Whether the label should use a fixed position instead of being automatically placed. More...
 
bool hasFixedQuadrant () const
 Returns whether the quadrant for the label is fixed. More...
 
QgsFeatureId id () const
 Identifier of the label (unique within the parent label provider) More...
 
bool isObstacle () const
 Returns whether the feature will act as an obstacle for labels. More...
 
bool labelAllParts () const
 Returns true if all parts of the feature should be labeled. More...
 
QString labelText () const
 Text of the label. More...
 
pal::Layerlayer () const
 Gets PAL layer of the label feature. Should be only used internally in PAL. More...
 
double obstacleFactor () const
 Returns the obstacle factor for the feature. More...
 
GEOSGeometry * obstacleGeometry () const
 Returns the label's obstacle geometry, if different to the feature geometry. More...
 
QgsPalLayerSettings::OffsetType offsetType () const
 Returns the offset type, which determines how offsets and distance to label behaves. More...
 
double overrunDistance () const
 Returns the permissible distance (in map units) which labels are allowed to overrun the start or end of linear features. More...
 
double overrunSmoothDistance () const
 Returns the distance (in map units) with which the ends of linear features are averaged over when calculating the direction at which to overrun labels. More...
 
QgsGeometry permissibleZone () const
 Returns the label's permissible zone geometry. More...
 
const GEOSPreparedGeometry * permissibleZonePrepared () const
 Returns a GEOS prepared geometry representing the label's permissibleZone(). More...
 
QgsPointXY positionOffset () const
 Applies only to "offset from point" placement strategy. More...
 
QVector< QgsPalLayerSettings::PredefinedPointPositionpredefinedPositionOrder () const
 Returns the priority ordered list of predefined positions for label candidates. More...
 
double priority () const
 Returns the feature's labeling priority. More...
 
QgsAbstractLabelProviderprovider () const
 Returns provider of this instance. More...
 
QPointF quadOffset () const
 Applies to "offset from point" placement strategy and "around point" (in case hasFixedQuadrant() returns true). More...
 
double repeatDistance () const
 Applies only to linestring features - after what distance (in map units) the labels should be repeated (0 = no repetitions) More...
 
void setAlwaysShow (bool enabled)
 Sets whether label should be always shown (sets very high label priority) More...
 
void setArrangementFlags (pal::LineArrangementFlags flags)
 Sets the feature's arrangement flags. More...
 
void setCurvedLabelInfo (pal::LabelInfo *info)
 takes ownership of the instance More...
 
void setDistLabel (double dist)
 Applies to "around point" placement strategy or linestring features. More...
 
void setFeature (const QgsFeature &feature)
 Sets the original feature associated with this label. More...
 
void setFixedAngle (double angle)
 Sets angle in degrees of the fixed angle (relevant only if hasFixedAngle() returns true) More...
 
void setFixedPosition (const QgsPointXY &point)
 Sets coordinates of the fixed position (relevant only if hasFixedPosition() returns true) More...
 
void setHasFixedAngle (bool enabled)
 Sets whether the label should use a fixed angle instead of using angle from automatic placement. More...
 
void setHasFixedPosition (bool enabled)
 Sets whether the label should use a fixed position instead of being automatically placed. More...
 
void setHasFixedQuadrant (bool enabled)
 Sets whether the quadrant for the label must be respected. More...
 
void setIsObstacle (bool enabled)
 Sets whether the feature will act as an obstacle for labels. More...
 
void setLabelAllParts (bool labelAllParts)
 Sets whether all parts of the feature should be labeled. More...
 
void setLabelText (const QString &text)
 Sets text of the label. More...
 
void setLayer (pal::Layer *layer)
 Assign PAL layer to the label feature. Should be only used internally in PAL. More...
 
void setObstacleFactor (double factor)
 Sets the obstacle factor for the feature. More...
 
void setObstacleGeometry (geos::unique_ptr obstacleGeom)
 Sets the label's obstacle geometry, if different to the feature geometry. More...
 
void setOffsetType (QgsPalLayerSettings::OffsetType type)
 Sets the offset type, which determines how offsets and distance to label behaves. More...
 
void setOverrunDistance (double distance)
 Sets the permissible distance (in map units) which labels are allowed to overrun the start or end of linear features. More...
 
void setOverrunSmoothDistance (double distance)
 Sets the distance (in map units) with which the ends of linear features are averaged over when calculating the direction at which to overrun labels. More...
 
void setPermissibleZone (const QgsGeometry &geometry)
 Sets the label's permissible zone geometry. More...
 
void setPositionOffset (const QgsPointXY &offset)
 Applies only to "offset from point" placement strategy. More...
 
void setPredefinedPositionOrder (const QVector< QgsPalLayerSettings::PredefinedPointPosition > &order)
 Sets the priority ordered list of predefined positions for label candidates. More...
 
void setPriority (double priority)
 Sets the priority for labeling the feature. More...
 
void setQuadOffset (QPointF quadOffset)
 Set which side of the point to use. More...
 
void setRepeatDistance (double dist)
 Applies only to linestring features - set after what distance (in map units) the labels should be repeated (0 = no repetitions) More...
 
void setRotatedSize (QSizeF size)
 Sets an alternate label size to be used when a label rotation angle is between 45 to 135 and 235 to 313 degrees and the text rotation mode is set to rotation-based. More...
 
void setSymbol (const QgsSymbol *symbol)
 Sets the feature symbol associated with this label. More...
 
void setSymbolSize (QSizeF size)
 Sets the size of the rendered symbol associated with this feature. More...
 
void setVisualMargin (const QgsMargins &margin)
 Sets the visual margin for the label feature. More...
 
void setZIndex (double zIndex)
 Sets the label's z-index. More...
 
QSizeF size (double angle=0.0) const
 Size of the label (in map units) More...
 
const QgsSymbolsymbol ()
 Returns the feature symbol associated with this label. More...
 
const QSizeF & symbolSize () const
 Returns the size of the rendered symbol associated with this feature, if applicable. More...
 
const QgsMarginsvisualMargin () const
 Returns the visual margin for the label feature. More...
 
double zIndex () const
 Returns the label's z-index. More...
 

Protected Attributes

bool mAlwaysShow
 whether to always show label - even in case of collisions More...
 
pal::LineArrangementFlags mArrangementFlags = nullptr
 
double mDistLabel
 distance of label from the feature (only for "around point" placement or linestrings) More...
 
double mFixedAngle
 fixed rotation for the label (instead of automatic choice) More...
 
QgsPointXY mFixedPosition
 fixed position for the label (instead of automatic placement) More...
 
geos::unique_ptr mGeometry
 Geometry of the feature to be labelled. More...
 
bool mHasFixedAngle
 whether mFixedAngle should be respected More...
 
bool mHasFixedPosition
 whether mFixedPosition should be respected More...
 
bool mHasFixedQuadrant
 whether mQuadOffset should be respected (only for "around point" placement) More...
 
QgsFeatureId mId
 Associated ID unique within the parent label provider. More...
 
pal::LabelInfomInfo = nullptr
 extra information for curved labels (may be nullptr) More...
 
bool mIsObstacle
 whether the feature geometry acts as an obstacle for labels More...
 
QString mLabelText
 text of the label More...
 
pal::LayermLayer = nullptr
 Pointer to PAL layer (assigned when registered to PAL) More...
 
double mObstacleFactor
 how strong is the geometry acting as obstacle More...
 
geos::unique_ptr mObstacleGeometry
 Optional geometry to use for label obstacles, if different to mGeometry. More...
 
QgsPalLayerSettings::OffsetType mOffsetType
 Offset type for certain placement modes. More...
 
double mOverrunDistance = 0
 Distance to allow label to overrun linear features. More...
 
double mOverrunSmoothDistance = 0
 Distance to smooth angle of line start and end when calculating overruns. More...
 
QgsGeometry mPermissibleZone
 Optional geometry to use for label's permissible zone. More...
 
QgsPointXY mPositionOffset
 offset of label from the feature (only for "offset from point" placement) More...
 
QVector< QgsPalLayerSettings::PredefinedPointPositionmPredefinedPositionOrder
 Ordered list of predefined positions for label (only for OrderedPositionsAroundPoint placement) More...
 
double mPriority
 Priority of the label. More...
 
QPointF mQuadOffset
 whether the side of the label is fixed (only for "around point" placement) More...
 
double mRepeatDistance
 distance after which label should be repeated (only for linestrings) More...
 
QSizeF mRotatedSize
 Width and height of the label when rotated between 45 to 135 and 235 to 315 degrees;. More...
 
QSizeF mSize
 Width and height of the label. More...
 
QSizeF mSymbolSize
 Size of associated rendered symbol, if applicable. More...
 
QgsMargins mVisualMargin
 Visual margin of label contents. More...
 
double mZIndex
 Z-index of label (higher z-index labels are rendered on top of lower z-index labels) More...
 

Detailed Description

The QgsLabelFeature class describes a feature that should be used within the labeling engine.

Those may be the usual textual labels, diagrams, or any other custom type of map annotations (generated by custom label providers).

Instances only contain data relevant to the labeling engine (geometry, label size etc.) necessary for the layout. Rendering of labels is done by label providers.

Individual label providers may create subclasses of QgsLabelFeature in order to add more data to the instances that will be later used for drawing of labels.

Note
this class is not a part of public API yet. See notes in QgsLabelingEngine
not available in Python bindings
Since
QGIS 2.12

Definition at line 54 of file qgslabelfeature.h.

Constructor & Destructor Documentation

◆ QgsLabelFeature()

QgsLabelFeature::QgsLabelFeature ( QgsFeatureId  id,
geos::unique_ptr  geometry,
QSizeF  size 
)

Create label feature, takes ownership of the geometry instance.

Definition at line 20 of file qgslabelfeature.cpp.

◆ ~QgsLabelFeature()

QgsLabelFeature::~QgsLabelFeature ( )
virtual

Clean up geometry and curved label info (if present)

Definition at line 39 of file qgslabelfeature.cpp.

Member Function Documentation

◆ alwaysShow()

bool QgsLabelFeature::alwaysShow ( ) const
inline

Whether label should be always shown (sets very high label priority)

Definition at line 303 of file qgslabelfeature.h.

◆ arrangementFlags()

pal::LineArrangementFlags QgsLabelFeature::arrangementFlags ( ) const
inline

Returns the feature's arrangement flags.

See also
setArrangementFlags

Definition at line 342 of file qgslabelfeature.h.

◆ curvedLabelInfo()

pal::LabelInfo* QgsLabelFeature::curvedLabelInfo ( ) const
inline

Gets additional infor required for curved label placement. Returns nullptr if not set.

Definition at line 363 of file qgslabelfeature.h.

◆ distLabel()

double QgsLabelFeature::distLabel ( ) const
inline

Applies to "around point" placement strategy or linestring features.

Distance of the label from the feature (in map units)

Definition at line 268 of file qgslabelfeature.h.

◆ feature()

QgsFeature QgsLabelFeature::feature ( ) const

Returns the original feature associated with this label.

See also
setFeature()
Since
QGIS 3.10

Definition at line 76 of file qgslabelfeature.cpp.

◆ fixedAngle()

double QgsLabelFeature::fixedAngle ( ) const
inline

Angle in degrees of the fixed angle (relevant only if hasFixedAngle() returns true)

Definition at line 202 of file qgslabelfeature.h.

◆ fixedPosition()

QgsPointXY QgsLabelFeature::fixedPosition ( ) const
inline

Coordinates of the fixed position (relevant only if hasFixedPosition() returns true)

Definition at line 193 of file qgslabelfeature.h.

◆ geometry()

GEOSGeometry* QgsLabelFeature::geometry ( ) const
inline

Gets access to the associated geometry.

Definition at line 67 of file qgslabelfeature.h.

◆ hasFixedAngle()

bool QgsLabelFeature::hasFixedAngle ( ) const
inline

Whether the label should use a fixed angle instead of using angle from automatic placement.

Definition at line 198 of file qgslabelfeature.h.

◆ hasFixedPosition()

bool QgsLabelFeature::hasFixedPosition ( ) const
inline

Whether the label should use a fixed position instead of being automatically placed.

Definition at line 189 of file qgslabelfeature.h.

◆ hasFixedQuadrant()

bool QgsLabelFeature::hasFixedQuadrant ( ) const
inline

Returns whether the quadrant for the label is fixed.

Applies to "around point" placement strategy.

See also
setHasFixedQuadrant
quadOffset

Definition at line 212 of file qgslabelfeature.h.

◆ id()

QgsFeatureId QgsLabelFeature::id ( ) const
inline

Identifier of the label (unique within the parent label provider)

Definition at line 64 of file qgslabelfeature.h.

◆ isObstacle()

bool QgsLabelFeature::isObstacle ( ) const
inline

Returns whether the feature will act as an obstacle for labels.

Returns
true if feature is an obstacle
See also
setIsObstacle

Definition at line 312 of file qgslabelfeature.h.

◆ labelAllParts()

bool QgsLabelFeature::labelAllParts ( ) const
inline

Returns true if all parts of the feature should be labeled.

See also
setLabelAllParts()
Since
QGIS 3.10

Definition at line 453 of file qgslabelfeature.h.

◆ labelText()

QString QgsLabelFeature::labelText ( ) const
inline

Text of the label.

Used also if "merge connected lines to avoid duplicate labels" is enabled to identify which features may be merged.

Definition at line 358 of file qgslabelfeature.h.

◆ layer()

pal::Layer* QgsLabelFeature::layer ( ) const
inline

Gets PAL layer of the label feature. Should be only used internally in PAL.

Definition at line 368 of file qgslabelfeature.h.

◆ obstacleFactor()

double QgsLabelFeature::obstacleFactor ( ) const
inline

Returns the obstacle factor for the feature.

The factor controls the penalty for labels overlapping this feature.

See also
setObstacleFactor

Definition at line 326 of file qgslabelfeature.h.

◆ obstacleGeometry()

GEOSGeometry* QgsLabelFeature::obstacleGeometry ( ) const
inline

Returns the label's obstacle geometry, if different to the feature geometry.

See also
setObstacleGeometry()
Since
QGIS 2.14

Definition at line 85 of file qgslabelfeature.h.

◆ offsetType()

QgsPalLayerSettings::OffsetType QgsLabelFeature::offsetType ( ) const
inline

Returns the offset type, which determines how offsets and distance to label behaves.

Support depends on which placement mode is used for generating label candidates.

See also
setOffsetType()

Definition at line 254 of file qgslabelfeature.h.

◆ overrunDistance()

double QgsLabelFeature::overrunDistance ( ) const

Returns the permissible distance (in map units) which labels are allowed to overrun the start or end of linear features.

See also
setOverrunDistance()
overrunSmoothDistance()
Since
QGIS 3.10

Definition at line 95 of file qgslabelfeature.cpp.

◆ overrunSmoothDistance()

double QgsLabelFeature::overrunSmoothDistance ( ) const

Returns the distance (in map units) with which the ends of linear features are averaged over when calculating the direction at which to overrun labels.

See also
setOverrunSmoothDistance()
overrunDistance()
Since
QGIS 3.10

Definition at line 105 of file qgslabelfeature.cpp.

◆ permissibleZone()

QgsGeometry QgsLabelFeature::permissibleZone ( ) const
inline

Returns the label's permissible zone geometry.

If a valid geometry is returned, the feature's label MUST be fully contained within this zone, and the feature will not be labeled if no candidates can be generated which are not contained within the zone.

See also
setPermissibleZone()
permissibleZonePrepared()
Since
QGIS 3.0

Definition at line 106 of file qgslabelfeature.h.

◆ permissibleZonePrepared()

const GEOSPreparedGeometry* QgsLabelFeature::permissibleZonePrepared ( ) const
inline

Returns a GEOS prepared geometry representing the label's permissibleZone().

See also
permissibleZone()
Since
QGIS 3.0

Definition at line 114 of file qgslabelfeature.h.

◆ positionOffset()

QgsPointXY QgsLabelFeature::positionOffset ( ) const
inline

Applies only to "offset from point" placement strategy.

What offset (in map units) to use from the point

Definition at line 240 of file qgslabelfeature.h.

◆ predefinedPositionOrder()

QVector< QgsPalLayerSettings::PredefinedPointPosition > QgsLabelFeature::predefinedPositionOrder ( ) const
inline

Returns the priority ordered list of predefined positions for label candidates.

This property is only used for OrderedPositionsAroundPoint placements.

See also
setPredefinedPositionOrder()

Definition at line 281 of file qgslabelfeature.h.

◆ priority()

double QgsLabelFeature::priority ( ) const
inline

Returns the feature's labeling priority.

Returns
feature's priority, as a value between 0 (highest priority) and 1 (lowest priority). Returns -1.0 if feature will use the layer's default priority.
See also
setPriority

Definition at line 160 of file qgslabelfeature.h.

◆ provider()

QgsAbstractLabelProvider * QgsLabelFeature::provider ( ) const

Returns provider of this instance.

Definition at line 610 of file qgslabelingengine.cpp.

◆ quadOffset()

QPointF QgsLabelFeature::quadOffset ( ) const
inline

Applies to "offset from point" placement strategy and "around point" (in case hasFixedQuadrant() returns true).

Determines which side of the point to use. For X coordinate, values -1, 0, 1 mean left, center, right. For Y coordinate, values -1, 0, 1 mean above, center, below.

Definition at line 228 of file qgslabelfeature.h.

◆ repeatDistance()

double QgsLabelFeature::repeatDistance ( ) const
inline

Applies only to linestring features - after what distance (in map units) the labels should be repeated (0 = no repetitions)

Definition at line 294 of file qgslabelfeature.h.

◆ setAlwaysShow()

void QgsLabelFeature::setAlwaysShow ( bool  enabled)
inline

Sets whether label should be always shown (sets very high label priority)

Definition at line 305 of file qgslabelfeature.h.

◆ setArrangementFlags()

void QgsLabelFeature::setArrangementFlags ( pal::LineArrangementFlags  flags)
inline

Sets the feature's arrangement flags.

Parameters
flagsarrangement flags
See also
arrangementFlags

Definition at line 349 of file qgslabelfeature.h.

◆ setCurvedLabelInfo()

void QgsLabelFeature::setCurvedLabelInfo ( pal::LabelInfo info)
inline

takes ownership of the instance

Definition at line 365 of file qgslabelfeature.h.

◆ setDistLabel()

void QgsLabelFeature::setDistLabel ( double  dist)
inline

Applies to "around point" placement strategy or linestring features.

Set distance of the label from the feature (in map units)

Definition at line 274 of file qgslabelfeature.h.

◆ setFeature()

void QgsLabelFeature::setFeature ( const QgsFeature feature)

Sets the original feature associated with this label.

See also
feature()
Since
QGIS 3.10

Definition at line 90 of file qgslabelfeature.cpp.

◆ setFixedAngle()

void QgsLabelFeature::setFixedAngle ( double  angle)
inline

Sets angle in degrees of the fixed angle (relevant only if hasFixedAngle() returns true)

Definition at line 204 of file qgslabelfeature.h.

◆ setFixedPosition()

void QgsLabelFeature::setFixedPosition ( const QgsPointXY point)
inline

Sets coordinates of the fixed position (relevant only if hasFixedPosition() returns true)

Definition at line 195 of file qgslabelfeature.h.

◆ setHasFixedAngle()

void QgsLabelFeature::setHasFixedAngle ( bool  enabled)
inline

Sets whether the label should use a fixed angle instead of using angle from automatic placement.

Definition at line 200 of file qgslabelfeature.h.

◆ setHasFixedPosition()

void QgsLabelFeature::setHasFixedPosition ( bool  enabled)
inline

Sets whether the label should use a fixed position instead of being automatically placed.

Definition at line 191 of file qgslabelfeature.h.

◆ setHasFixedQuadrant()

void QgsLabelFeature::setHasFixedQuadrant ( bool  enabled)
inline

Sets whether the quadrant for the label must be respected.

This can be used to fix the quadrant for specific features when using an "around point" placement.

See also
hasFixedQuadrant
quadOffset

Definition at line 220 of file qgslabelfeature.h.

◆ setIsObstacle()

void QgsLabelFeature::setIsObstacle ( bool  enabled)
inline

Sets whether the feature will act as an obstacle for labels.

Parameters
enabledwhether feature will act as an obstacle
See also
isObstacle

Definition at line 319 of file qgslabelfeature.h.

◆ setLabelAllParts()

void QgsLabelFeature::setLabelAllParts ( bool  labelAllParts)
inline

Sets whether all parts of the feature should be labeled.

See also
labelAllParts()
Since
QGIS 3.10

Definition at line 460 of file qgslabelfeature.h.

◆ setLabelText()

void QgsLabelFeature::setLabelText ( const QString &  text)
inline

Sets text of the label.

Definition at line 360 of file qgslabelfeature.h.

◆ setLayer()

void QgsLabelFeature::setLayer ( pal::Layer layer)
inline

Assign PAL layer to the label feature. Should be only used internally in PAL.

Definition at line 370 of file qgslabelfeature.h.

◆ setObstacleFactor()

void QgsLabelFeature::setObstacleFactor ( double  factor)
inline

Sets the obstacle factor for the feature.

The factor controls the penalty for labels overlapping this feature.

Parameters
factorlarger factors ( > 1.0 ) will result in labels which are less likely to cover this feature, smaller factors ( < 1.0 ) mean labels are more likely to cover this feature (where required)
See also
obstacleFactor

Definition at line 336 of file qgslabelfeature.h.

◆ setObstacleGeometry()

void QgsLabelFeature::setObstacleGeometry ( geos::unique_ptr  obstacleGeom)

Sets the label's obstacle geometry, if different to the feature geometry.

This can be used to override the shape of the feature for obstacle detection, e.g., to buffer around a point geometry to prevent labels being placed too close to the point itself. It not set, the feature's geometry is used for obstacle detection. Ownership of obstacle geometry is transferred.

See also
obstacleGeometry()
Since
QGIS 2.14

Definition at line 50 of file qgslabelfeature.cpp.

◆ setOffsetType()

void QgsLabelFeature::setOffsetType ( QgsPalLayerSettings::OffsetType  type)
inline

Sets the offset type, which determines how offsets and distance to label behaves.

Support depends on which placement mode is used for generating label candidates.

See also
offsetType()

Definition at line 262 of file qgslabelfeature.h.

◆ setOverrunDistance()

void QgsLabelFeature::setOverrunDistance ( double  distance)

Sets the permissible distance (in map units) which labels are allowed to overrun the start or end of linear features.

See also
overrunDistance()
setOverrunSmoothDistance()
Since
QGIS 3.10

Definition at line 100 of file qgslabelfeature.cpp.

◆ setOverrunSmoothDistance()

void QgsLabelFeature::setOverrunSmoothDistance ( double  distance)

Sets the distance (in map units) with which the ends of linear features are averaged over when calculating the direction at which to overrun labels.

See also
overrunSmoothDistance()
setOverrunDistance()
Since
QGIS 3.10

Definition at line 110 of file qgslabelfeature.cpp.

◆ setPermissibleZone()

void QgsLabelFeature::setPermissibleZone ( const QgsGeometry geometry)

Sets the label's permissible zone geometry.

If set, the feature's label MUST be fully contained within this zone, and the feature will not be labeled if no candidates can be generated which are not contained within the zone.

Parameters
geometrypermissible zone geometry. If an invalid QgsGeometry is passed then no zone limit will be applied to the label candidates (this is the default behavior).
See also
permissibleZone()
Since
QGIS 3.0

Definition at line 55 of file qgslabelfeature.cpp.

◆ setPositionOffset()

void QgsLabelFeature::setPositionOffset ( const QgsPointXY offset)
inline

Applies only to "offset from point" placement strategy.

Set what offset (in map units) to use from the point

Definition at line 246 of file qgslabelfeature.h.

◆ setPredefinedPositionOrder()

void QgsLabelFeature::setPredefinedPositionOrder ( const QVector< QgsPalLayerSettings::PredefinedPointPosition > &  order)
inline

Sets the priority ordered list of predefined positions for label candidates.

This property is only used for OrderedPositionsAroundPoint placements.

See also
predefinedPositionOrder()

Definition at line 288 of file qgslabelfeature.h.

◆ setPriority()

void QgsLabelFeature::setPriority ( double  priority)
inline

Sets the priority for labeling the feature.

Parameters
priorityfeature's priority, as a value between 0 (highest priority) and 1 (lowest priority). Set to -1.0 to use the layer's default priority for this feature.
See also
priority

Definition at line 169 of file qgslabelfeature.h.

◆ setQuadOffset()

void QgsLabelFeature::setQuadOffset ( QPointF  quadOffset)
inline

Set which side of the point to use.

See also
quadOffset

Definition at line 234 of file qgslabelfeature.h.

◆ setRepeatDistance()

void QgsLabelFeature::setRepeatDistance ( double  dist)
inline

Applies only to linestring features - set after what distance (in map units) the labels should be repeated (0 = no repetitions)

Definition at line 300 of file qgslabelfeature.h.

◆ setRotatedSize()

void QgsLabelFeature::setRotatedSize ( QSizeF  size)
inline

Sets an alternate label size to be used when a label rotation angle is between 45 to 135 and 235 to 313 degrees and the text rotation mode is set to rotation-based.

Since
QGIS 3.10

Definition at line 467 of file qgslabelfeature.h.

◆ setSymbol()

void QgsLabelFeature::setSymbol ( const QgsSymbol symbol)
inline

Sets the feature symbol associated with this label.

Ownership of symbol is not transferred to the label feature, .

See also
symbol()
Since
QGIS 3.10

Definition at line 406 of file qgslabelfeature.h.

◆ setSymbolSize()

void QgsLabelFeature::setSymbolSize ( QSizeF  size)
inline

Sets the size of the rendered symbol associated with this feature.

This size is taken into account in certain label placement modes to avoid placing labels over the rendered symbol for this feature.

See also
symbolSize()

Definition at line 143 of file qgslabelfeature.h.

◆ setVisualMargin()

void QgsLabelFeature::setVisualMargin ( const QgsMargins margin)
inline

Sets the visual margin for the label feature.

The visual margin represents a margin within the label which should not be considered when calculating the positions of candidates for the label feature. It is used in certain label placement modes to adjust the position of candidates so that they all appear to be at visually equal distances from a point feature. For instance, this can be used to place labels which sit above a point so that their baseline rather then the descender of the label is at a preset distance from the point.

Parameters
marginvisual margins for label
See also
visualMargin()

Definition at line 129 of file qgslabelfeature.h.

◆ setZIndex()

void QgsLabelFeature::setZIndex ( double  zIndex)
inline

Sets the label's z-index.

Higher z-index labels are rendered on top of lower z-index labels.

Parameters
zIndexz-index for label
See also
zIndex()
Since
QGIS 2.14

Definition at line 186 of file qgslabelfeature.h.

◆ size()

QSizeF QgsLabelFeature::size ( double  angle = 0.0) const

Size of the label (in map units)

Definition at line 81 of file qgslabelfeature.cpp.

◆ symbol()

const QgsSymbol* QgsLabelFeature::symbol ( )
inline

Returns the feature symbol associated with this label.

See also
setSymbol()
Since
QGIS 3.10

Definition at line 397 of file qgslabelfeature.h.

◆ symbolSize()

const QSizeF& QgsLabelFeature::symbolSize ( ) const
inline

Returns the size of the rendered symbol associated with this feature, if applicable.

This size is taken into account in certain label placement modes to avoid placing labels over the rendered symbol for this feature. The size will only be set for labels associated with a point feature.

See also
symbolSize()

Definition at line 152 of file qgslabelfeature.h.

◆ visualMargin()

const QgsMargins& QgsLabelFeature::visualMargin ( ) const
inline

Returns the visual margin for the label feature.

See also
setVisualMargin() for details

Definition at line 135 of file qgslabelfeature.h.

◆ zIndex()

double QgsLabelFeature::zIndex ( ) const
inline

Returns the label's z-index.

Higher z-index labels are rendered on top of lower z-index labels.

See also
setZIndex()
Since
QGIS 2.14

Definition at line 177 of file qgslabelfeature.h.

Member Data Documentation

◆ mAlwaysShow

bool QgsLabelFeature::mAlwaysShow
protected

whether to always show label - even in case of collisions

Definition at line 516 of file qgslabelfeature.h.

◆ mArrangementFlags

pal::LineArrangementFlags QgsLabelFeature::mArrangementFlags = nullptr
protected

Definition at line 531 of file qgslabelfeature.h.

◆ mDistLabel

double QgsLabelFeature::mDistLabel
protected

distance of label from the feature (only for "around point" placement or linestrings)

Definition at line 508 of file qgslabelfeature.h.

◆ mFixedAngle

double QgsLabelFeature::mFixedAngle
protected

fixed rotation for the label (instead of automatic choice)

Definition at line 500 of file qgslabelfeature.h.

◆ mFixedPosition

QgsPointXY QgsLabelFeature::mFixedPosition
protected

fixed position for the label (instead of automatic placement)

Definition at line 496 of file qgslabelfeature.h.

◆ mGeometry

geos::unique_ptr QgsLabelFeature::mGeometry
protected

Geometry of the feature to be labelled.

Definition at line 476 of file qgslabelfeature.h.

◆ mHasFixedAngle

bool QgsLabelFeature::mHasFixedAngle
protected

whether mFixedAngle should be respected

Definition at line 498 of file qgslabelfeature.h.

◆ mHasFixedPosition

bool QgsLabelFeature::mHasFixedPosition
protected

whether mFixedPosition should be respected

Definition at line 494 of file qgslabelfeature.h.

◆ mHasFixedQuadrant

bool QgsLabelFeature::mHasFixedQuadrant
protected

whether mQuadOffset should be respected (only for "around point" placement)

Definition at line 502 of file qgslabelfeature.h.

◆ mId

QgsFeatureId QgsLabelFeature::mId
protected

Associated ID unique within the parent label provider.

Definition at line 474 of file qgslabelfeature.h.

◆ mInfo

pal::LabelInfo* QgsLabelFeature::mInfo = nullptr
protected

extra information for curved labels (may be nullptr)

Definition at line 524 of file qgslabelfeature.h.

◆ mIsObstacle

bool QgsLabelFeature::mIsObstacle
protected

whether the feature geometry acts as an obstacle for labels

Definition at line 518 of file qgslabelfeature.h.

◆ mLabelText

QString QgsLabelFeature::mLabelText
protected

text of the label

Definition at line 522 of file qgslabelfeature.h.

◆ mLayer

pal::Layer* QgsLabelFeature::mLayer = nullptr
protected

Pointer to PAL layer (assigned when registered to PAL)

Definition at line 471 of file qgslabelfeature.h.

◆ mObstacleFactor

double QgsLabelFeature::mObstacleFactor
protected

how strong is the geometry acting as obstacle

Definition at line 520 of file qgslabelfeature.h.

◆ mObstacleGeometry

geos::unique_ptr QgsLabelFeature::mObstacleGeometry
protected

Optional geometry to use for label obstacles, if different to mGeometry.

Definition at line 478 of file qgslabelfeature.h.

◆ mOffsetType

QgsPalLayerSettings::OffsetType QgsLabelFeature::mOffsetType
protected

Offset type for certain placement modes.

Definition at line 510 of file qgslabelfeature.h.

◆ mOverrunDistance

double QgsLabelFeature::mOverrunDistance = 0
protected

Distance to allow label to overrun linear features.

Definition at line 527 of file qgslabelfeature.h.

◆ mOverrunSmoothDistance

double QgsLabelFeature::mOverrunSmoothDistance = 0
protected

Distance to smooth angle of line start and end when calculating overruns.

Definition at line 529 of file qgslabelfeature.h.

◆ mPermissibleZone

QgsGeometry QgsLabelFeature::mPermissibleZone
protected

Optional geometry to use for label's permissible zone.

Definition at line 480 of file qgslabelfeature.h.

◆ mPositionOffset

QgsPointXY QgsLabelFeature::mPositionOffset
protected

offset of label from the feature (only for "offset from point" placement)

Definition at line 506 of file qgslabelfeature.h.

◆ mPredefinedPositionOrder

QVector< QgsPalLayerSettings::PredefinedPointPosition > QgsLabelFeature::mPredefinedPositionOrder
protected

Ordered list of predefined positions for label (only for OrderedPositionsAroundPoint placement)

Definition at line 512 of file qgslabelfeature.h.

◆ mPriority

double QgsLabelFeature::mPriority
protected

Priority of the label.

Definition at line 490 of file qgslabelfeature.h.

◆ mQuadOffset

QPointF QgsLabelFeature::mQuadOffset
protected

whether the side of the label is fixed (only for "around point" placement)

Definition at line 504 of file qgslabelfeature.h.

◆ mRepeatDistance

double QgsLabelFeature::mRepeatDistance
protected

distance after which label should be repeated (only for linestrings)

Definition at line 514 of file qgslabelfeature.h.

◆ mRotatedSize

QSizeF QgsLabelFeature::mRotatedSize
protected

Width and height of the label when rotated between 45 to 135 and 235 to 315 degrees;.

Definition at line 484 of file qgslabelfeature.h.

◆ mSize

QSizeF QgsLabelFeature::mSize
protected

Width and height of the label.

Definition at line 482 of file qgslabelfeature.h.

◆ mSymbolSize

QSizeF QgsLabelFeature::mSymbolSize
protected

Size of associated rendered symbol, if applicable.

Definition at line 488 of file qgslabelfeature.h.

◆ mVisualMargin

QgsMargins QgsLabelFeature::mVisualMargin
protected

Visual margin of label contents.

Definition at line 486 of file qgslabelfeature.h.

◆ mZIndex

double QgsLabelFeature::mZIndex
protected

Z-index of label (higher z-index labels are rendered on top of lower z-index labels)

Definition at line 492 of file qgslabelfeature.h.


The documentation for this class was generated from the following files: