A text editor based on QScintilla2. More...

#include <qgscodeeditor.h>

Inheritance diagram for QgsCodeEditor:

[legend]

Public Types
enum class	Flag : int { CodeFolding = 1 << 0 , ImmediatelyUpdateHistory = 1 << 1 }
	Flags controlling behavior of code editor. More...

typedef QFlags< Flag >	Flags
	Flags controlling behavior of code editor.

enum class	MarginRole : int { LineNumbers = 0 , ErrorIndicators = 1 , FoldingControls = 2 }
	Margin roles. More...

enum class	Mode { ScriptEditor , OutputDisplay , CommandInput }
	Code editor modes. More...

Public Slots
virtual bool	checkSyntax ()
	Applies syntax checking to the editor.

void	clearPersistentHistory ()
	Clears the entire persistent history of commands run in the editor.

void	clearSessionHistory ()
	Clears the history of commands run in the current session.

virtual void	moveCursorToEnd ()
	Moves the cursor to the end of the document and scrolls to ensure it is visible.

virtual void	moveCursorToStart ()
	Moves the cursor to the start of the document and scrolls to ensure it is visible.

void	reformatCode ()
	Applies code reformatting to the editor.

void	removeHistoryCommand (int index)
	Removes the command at the specified index from the history of the code editor.

void	runCommand (const QString &command, bool skipHistory=false)
	Runs a command in the editor.

void	showHistory ()
	Shows the command history dialog.

void	showNextCommand ()
	Shows the next command from the session in the editor.

void	showPreviousCommand ()
	Shows the previous command from the session in the editor.

virtual void	toggleComment ()
	Toggle comment for the selected text.

bool	writeHistoryFile ()
	Stores the commands executed in the editor to the persistent history file.

Signals
void	persistentHistoryCleared ()
	Emitted when the persistent history of commands run in the editor is cleared.

void	sessionHistoryCleared ()
	Emitted when the history of commands run in the current session is cleared.

Public Member Functions
	QgsCodeEditor (QWidget *parent=nullptr, const QString &title=QString(), bool folding=false, bool margin=false, QgsCodeEditor::Flags flags=QgsCodeEditor::Flags(), QgsCodeEditor::Mode mode=QgsCodeEditor::Mode::ScriptEditor)
	Construct a new code editor.

void	addWarning (int lineNumber, const QString &warning)
	Adds a warning message and indicator to the specified a lineNumber.

virtual void	callTip () override

void	clearWarnings ()
	Clears all warning messages from the editor.

bool	foldingVisible ()
	Returns `true` if the folding controls are visible in the editor.

QStringList	history () const
	Returns the list of commands previously executed in the editor.

void	insertText (const QString &text)
	Insert text at cursor position, or replace any selected text if user has made a selection.

QgsCodeInterpreter *	interpreter () const
	Returns the attached code interpreter, or `nullptr` if not set.

bool	isCursorOnLastLine () const
	Returns `true` if the cursor is on the last line of the document.

virtual Qgis::ScriptLanguage	language () const
	Returns the associated scripting language.

virtual Qgis::ScriptLanguageCapabilities	languageCapabilities () const
	Returns the associated scripting language capabilities.

int	linearPosition () const
	Convenience function to return the cursor position as a linear index.

bool	lineNumbersVisible () const
	Returns whether line numbers are visible in the editor.

Q_DECL_DEPRECATED bool	marginVisible ()
	Returns whether margins are in a visible state.

QgsCodeEditor::Mode	mode () const
	Returns the code editor mode.

int	selectionEnd () const
	Convenience function to return the end of the selection as a linear index Contrary to the getSelection method, this method returns the cursor position if no selection is made.

int	selectionStart () const
	Convenience function to return the start of the selection as a linear index Contrary to the getSelection method, this method returns the cursor position if no selection is made.

void	setCustomAppearance (const QString &scheme=QString(), const QMap< QgsCodeEditorColorScheme::ColorRole, QColor > &customColors=QMap< QgsCodeEditorColorScheme::ColorRole, QColor >(), const QString &fontFamily=QString(), int fontSize=0)
	Sets a custom appearance for the widget, disconnecting it from using the standard appearance taken from QSettings.

void	setFoldingVisible (bool folding)
	Set whether the folding controls are visible in the editor.

void	setHistoryFilePath (const QString &path)
	Sets the file path to use for recording and retrieving previously executed commands.

void	setInterpreter (QgsCodeInterpreter *newInterpreter)
	Sets an attached code interpreter for executing commands when the editor is in the QgsCodeEditor::Mode::CommandInput mode.

void	setLinearPosition (int position)
	Convenience function to set the cursor position as a linear index.

void	setLinearSelection (int start, int end)
	Convenience function to set the selection using linear indexes.

void	setLineNumbersVisible (bool visible)
	Sets whether line numbers should be visible in the editor.

Q_DECL_DEPRECATED void	setMarginVisible (bool margin)
	Set margin visible state.

void	setTitle (const QString &title)
	Set the widget title.

int	wrapPosition (int line=-1)
	Returns the linear position of the start of the last wrapped part for the specified line, or for the current line if line = -1 If wrapping is disabled, returns -1 instead.

Static Public Member Functions
static QColor	color (QgsCodeEditorColorScheme::ColorRole role)
	Returns the color to use in the editor for the specified role.

static QColor	defaultColor (QgsCodeEditorColorScheme::ColorRole role, const QString &theme=QString())
	Returns the default color for the specified role.

static QFont	getMonospaceFont ()
	Returns the monospaced font to use for code editors.

static QString	languageToString (Qgis::ScriptLanguage language)
	Returns a user-friendly, translated name of the specified script language.

static void	setColor (QgsCodeEditorColorScheme::ColorRole role, const QColor &color)
	Sets the color to use in the editor for the specified role.

Static Public Attributes
static constexpr int	SEARCH_RESULT_INDICATOR = QsciScintilla::INDIC_MAX - 1
	Indicator index for search results.

static QgsSettingsTreeNode *	sTreeCodeEditor = QgsSettingsTree::sTreeGui->createChildNode( QStringLiteral( "code-editor" ) )

Protected Member Functions
void	contextMenuEvent (QContextMenuEvent *event) override

bool	eventFilter (QObject watched, QEvent event) override

void	focusOutEvent (QFocusEvent *event) override

virtual void	initializeLexer ()
	Called when the dialect specific code lexer needs to be initialized (or reinitialized).

void	keyPressEvent (QKeyEvent *event) override

QColor	lexerColor (QgsCodeEditorColorScheme::ColorRole role) const
	Returns the color to use in the lexer for the specified role.

QFont	lexerFont () const
	Returns the font to use in the lexer.

virtual void	populateContextMenu (QMenu *menu)
	Called when the context menu for the widget is about to be shown, after it has been fully populated with the standard actions created by the base class.

virtual QString	reformatCodeString (const QString &string)
	Applies code reformatting to a string and returns the result.

void	runPostLexerConfigurationTasks ()
	Performs tasks which must be run after a lexer has been set for the widget.

virtual void	showMessage (const QString &title, const QString &message, Qgis::MessageLevel level)
	Shows a user facing message (eg a warning message).

void	updatePrompt ()
	Triggers an update of the interactive prompt part of the editor.

void	updateSoftHistory ()
	Updates the soft history by storing the current editor text in the history.

Static Protected Member Functions
static bool	isFixedPitch (const QFont &font)
	Returns `true` if a font is a fixed pitch font.

Detailed Description

A text editor based on QScintilla2.

Note: may not be available in Python bindings, depending on platform support

Definition at line 100 of file qgscodeeditor.h.

Member Typedef Documentation

◆ Flags

typedef QFlags< Flag > QgsCodeEditor::Flags

Flags controlling behavior of code editor.

Since: QGIS 3.28

Definition at line 157 of file qgscodeeditor.h.

Member Enumeration Documentation

◆ Flag

enum class QgsCodeEditor::Flag : int

strong

Flags controlling behavior of code editor.

Since: QGIS 3.28

Enumerator

CodeFolding

Indicates that code folding should be enabled for the editor.

ImmediatelyUpdateHistory

Indicates that the history file should be immediately updated whenever a command is executed, instead of the default behavior of only writing the history on widget close.

Since: QGIS 3.32

Definition at line 145 of file qgscodeeditor.h.

◆ MarginRole

enum class QgsCodeEditor::MarginRole : int

strong

Margin roles.

This enum contains the roles which the different numbered margins are used for.

Since: QGIS 3.16

Enumerator
LineNumbers	Line numbers.
ErrorIndicators	Error indicators.
FoldingControls	Folding controls.

Definition at line 132 of file qgscodeeditor.h.

◆ Mode

enum class QgsCodeEditor::Mode

strong

Code editor modes.

Since: QGIS 3.30

Enumerator
ScriptEditor	Standard mode, allows for display and edit of entire scripts.
OutputDisplay	Read only mode for display of command outputs.
CommandInput	Command input mode.

Definition at line 117 of file qgscodeeditor.h.

Constructor & Destructor Documentation

◆ QgsCodeEditor()

QgsCodeEditor::QgsCodeEditor	(	QWidget *	parent = `nullptr`,
		const QString &	title = `QString()`,
		bool	folding = `false`,
		bool	margin = `false`,
		QgsCodeEditor::Flags	flags = `QgsCodeEditor::Flags()`,
		QgsCodeEditor::Mode	mode = `QgsCodeEditor::Mode::ScriptEditor`
	)

Construct a new code editor.

Parameters

parent	The parent QWidget
title	The title to show in the code editor dialog
folding	`false:` Enable folding for code editor (deprecated, use flags instead)
margin	`false:` Enable margin for code editor (deprecated)
flags	flags controlling behavior of code editor (since QGIS 3.28)
mode	code editor mode (since QGIS 3.30)

Definition at line 81 of file qgscodeeditor.cpp.

Member Function Documentation

◆ addWarning()

void QgsCodeEditor::addWarning	(	int	lineNumber,
		const QString &	warning
	)

Adds a warning message and indicator to the specified a lineNumber.

See also: clearWarnings()

Since: QGIS 3.16

Definition at line 1071 of file qgscodeeditor.cpp.

◆ callTip()

void QgsCodeEditor::callTip ( )

overridevirtual

Definition at line 1214 of file qgscodeeditor.cpp.

◆ checkSyntax

bool QgsCodeEditor::checkSyntax ( )

virtualslot

Applies syntax checking to the editor.

This is only supported for editors which return the Qgis::ScriptLanguageCapability::CheckSyntax capability from languageCapabilities().

Since: QGIS 3.32

Reimplemented in QgsCodeEditorPython.

Definition at line 789 of file qgscodeeditor.cpp.

◆ clearPersistentHistory

void QgsCodeEditor::clearPersistentHistory ( )

slot

Clears the entire persistent history of commands run in the editor.

Note: Applies to code editors in the QgsCodeEditor::Mode::CommandInput mode only.

Since: QGIS 3.30

Definition at line 829 of file qgscodeeditor.cpp.

◆ clearSessionHistory

void QgsCodeEditor::clearSessionHistory ( )

slot

Clears the history of commands run in the current session.

Note: Applies to code editors in the QgsCodeEditor::Mode::CommandInput mode only.

Since: QGIS 3.30

Definition at line 820 of file qgscodeeditor.cpp.

◆ clearWarnings()

void QgsCodeEditor::clearWarnings ( )

Clears all warning messages from the editor.

See also: addWarning()

Since: QGIS 3.16

Definition at line 1086 of file qgscodeeditor.cpp.

◆ color()

QColor QgsCodeEditor::color ( QgsCodeEditorColorScheme::ColorRole role )

static

Returns the color to use in the editor for the specified role.

This color will be the default theme color for the role, unless the user has manually selected a custom color scheme for the editor.

See also: setColor()

Since: QGIS 3.16

Definition at line 992 of file qgscodeeditor.cpp.

◆ contextMenuEvent()

void QgsCodeEditor::contextMenuEvent ( QContextMenuEvent * event )

overrideprotected

Definition at line 252 of file qgscodeeditor.cpp.

◆ defaultColor()

QColor QgsCodeEditor::defaultColor	(	QgsCodeEditorColorScheme::ColorRole	role,
		const QString &	theme = `QString()`
	)

static

Returns the default color for the specified role.

The optional theme argument can be used to specify a color theme. A blank theme indicates the default color scheme.

Available themes are stored in QgsCodeEditorColorSchemeRegistry, and can be retrieved via QgsGui::codeEditorColorSchemeRegistry().

Since: QGIS 3.16

Definition at line 922 of file qgscodeeditor.cpp.

◆ eventFilter()

bool QgsCodeEditor::eventFilter	(	QObject *	watched,
		QEvent *	event
	)

overrideprotected

Definition at line 330 of file qgscodeeditor.cpp.

◆ focusOutEvent()

void QgsCodeEditor::focusOutEvent ( QFocusEvent * event )

overrideprotected

Definition at line 151 of file qgscodeeditor.cpp.

◆ foldingVisible()

bool QgsCodeEditor::foldingVisible ( )

Returns true if the folding controls are visible in the editor.

See also: setFoldingVisible()

Definition at line 581 of file qgscodeeditor.cpp.

◆ getMonospaceFont()

QFont QgsCodeEditor::getMonospaceFont ( )

static

Returns the monospaced font to use for code editors.

Since: QGIS 3.16

Definition at line 1026 of file qgscodeeditor.cpp.

◆ history()

QStringList QgsCodeEditor::history ( ) const

Returns the list of commands previously executed in the editor.

Note: Applies to code editors in the QgsCodeEditor::Mode::CommandInput mode only.

Since: QGIS 3.30

Definition at line 799 of file qgscodeeditor.cpp.

◆ initializeLexer()

void QgsCodeEditor::initializeLexer ( )

protectedvirtual

Called when the dialect specific code lexer needs to be initialized (or reinitialized).

The default implementation does nothing.

Since: QGIS 3.16

Reimplemented in QgsCodeEditorCSS, QgsCodeEditorExpression, QgsCodeEditorHTML, QgsCodeEditorJavascript, QgsCodeEditorJson, QgsCodeEditorPython, QgsCodeEditorR, QgsCodeEditorShell, and QgsCodeEditorSQL.

Definition at line 345 of file qgscodeeditor.cpp.

◆ insertText()

void QgsCodeEditor::insertText ( const QString & text )

Insert text at cursor position, or replace any selected text if user has made a selection.

Parameters

text	The text to be inserted

Definition at line 906 of file qgscodeeditor.cpp.

◆ interpreter()

QgsCodeInterpreter * QgsCodeEditor::interpreter ( ) const

Returns the attached code interpreter, or nullptr if not set.

See also: setInterpreter()

Since: QGIS 3.30

Definition at line 696 of file qgscodeeditor.cpp.

◆ isCursorOnLastLine()

bool QgsCodeEditor::isCursorOnLastLine ( ) const

Returns true if the cursor is on the last line of the document.

Since: QGIS 3.28

Definition at line 1097 of file qgscodeeditor.cpp.

◆ isFixedPitch()

bool QgsCodeEditor::isFixedPitch ( const QFont & font )

staticprotected

Returns true if a font is a fixed pitch font.

Definition at line 1021 of file qgscodeeditor.cpp.

◆ keyPressEvent()

void QgsCodeEditor::keyPressEvent ( QKeyEvent * event )

overrideprotected

Definition at line 181 of file qgscodeeditor.cpp.

◆ language()

Qgis::ScriptLanguage QgsCodeEditor::language ( ) const

virtual

Returns the associated scripting language.

Since: QGIS 3.30

Reimplemented in QgsCodeEditorCSS, QgsCodeEditorExpression, QgsCodeEditorHTML, QgsCodeEditorJavascript, QgsCodeEditorJson, QgsCodeEditorPython, QgsCodeEditorR, QgsCodeEditorShell, and QgsCodeEditorSQL.

Definition at line 483 of file qgscodeeditor.cpp.

◆ languageCapabilities()

Qgis::ScriptLanguageCapabilities QgsCodeEditor::languageCapabilities ( ) const

virtual

Returns the associated scripting language capabilities.

Since: QGIS 3.32

Reimplemented in QgsCodeEditorHTML, and QgsCodeEditorPython.

Definition at line 488 of file qgscodeeditor.cpp.

◆ languageToString()

QString QgsCodeEditor::languageToString ( Qgis::ScriptLanguage language )

static

Returns a user-friendly, translated name of the specified script language.

Since: QGIS 3.30

Definition at line 493 of file qgscodeeditor.cpp.

◆ lexerColor()

QColor QgsCodeEditor::lexerColor ( QgsCodeEditorColorScheme::ColorRole role ) const

protected

Returns the color to use in the lexer for the specified role.

Since: QGIS 3.16

Definition at line 350 of file qgscodeeditor.cpp.

◆ lexerFont()

QFont QgsCodeEditor::lexerFont ( ) const

protected

Returns the font to use in the lexer.

Since: QGIS 3.16

Definition at line 366 of file qgscodeeditor.cpp.

◆ linearPosition()

int QgsCodeEditor::linearPosition ( ) const

Convenience function to return the cursor position as a linear index.

Since: QGIS 3.36

Definition at line 1133 of file qgscodeeditor.cpp.

◆ lineNumbersVisible()

bool QgsCodeEditor::lineNumbersVisible ( ) const

Returns whether line numbers are visible in the editor.

See also: setLineNumbersVisible()

Since: QGIS 3.16

Definition at line 563 of file qgscodeeditor.cpp.

◆ marginVisible()

Q_DECL_DEPRECATED bool QgsCodeEditor::marginVisible ( )

inline

Returns whether margins are in a visible state.

Deprecated:: QGIS 3.40. Use base class methods for individual margins instead, or lineNumbersVisible().

Definition at line 213 of file qgscodeeditor.h.

◆ mode()

QgsCodeEditor::Mode QgsCodeEditor::mode ( ) const

inline

Returns the code editor mode.

Since: QGIS 3.30

Definition at line 326 of file qgscodeeditor.h.

◆ moveCursorToEnd

void QgsCodeEditor::moveCursorToEnd ( )

virtualslot

Moves the cursor to the end of the document and scrolls to ensure it is visible.

Since: QGIS 3.28

Definition at line 1121 of file qgscodeeditor.cpp.

◆ moveCursorToStart

void QgsCodeEditor::moveCursorToStart ( )

virtualslot

Moves the cursor to the start of the document and scrolls to ensure it is visible.

Since: QGIS 3.28

Definition at line 1111 of file qgscodeeditor.cpp.

◆ persistentHistoryCleared

void QgsCodeEditor::persistentHistoryCleared ( )

signal

Emitted when the persistent history of commands run in the editor is cleared.

Since: QGIS 3.30

◆ populateContextMenu()

void QgsCodeEditor::populateContextMenu ( QMenu * menu )

protectedvirtual

Called when the context menu for the widget is about to be shown, after it has been fully populated with the standard actions created by the base class.

This method provides an opportunity for subclasses to add additional non-standard actions to the context menu.

Since: QGIS 3.30

Reimplemented in QgsCodeEditorPython.

Definition at line 657 of file qgscodeeditor.cpp.

◆ reformatCode

void QgsCodeEditor::reformatCode ( )

slot

Applies code reformatting to the editor.

This is only supported for editors which return the Qgis::ScriptLanguageCapability::Reformat capability from languageCapabilities().

Since: QGIS 3.32

Definition at line 764 of file qgscodeeditor.cpp.

◆ reformatCodeString()

QString QgsCodeEditor::reformatCodeString ( const QString & string )

protectedvirtual

Applies code reformatting to a string and returns the result.

This is only supported for editors which return the Qgis::ScriptLanguageCapability::Reformat capability from languageCapabilities().

Since: QGIS 3.32

Reimplemented in QgsCodeEditorHTML, and QgsCodeEditorPython.

Definition at line 662 of file qgscodeeditor.cpp.

◆ removeHistoryCommand

void QgsCodeEditor::removeHistoryCommand ( int index )

slot

Removes the command at the specified index from the history of the code editor.

Since: QGIS 3.30

Definition at line 893 of file qgscodeeditor.cpp.

◆ runCommand

void QgsCodeEditor::runCommand	(	const QString &	command,
		bool	skipHistory = `false`
	)

slot

Runs a command in the editor.

An interpreter() must be set.

Since QGIS 3.32, if skipHistory is true then the command will not be automatically added to the widget's history.

Since: QGIS 3.30

Definition at line 804 of file qgscodeeditor.cpp.

◆ runPostLexerConfigurationTasks()

void QgsCodeEditor::runPostLexerConfigurationTasks ( )

protected

Performs tasks which must be run after a lexer has been set for the widget.

Since: QGIS 3.16

Definition at line 399 of file qgscodeeditor.cpp.

◆ selectionEnd()

int QgsCodeEditor::selectionEnd ( ) const

Convenience function to return the end of the selection as a linear index Contrary to the getSelection method, this method returns the cursor position if no selection is made.

Since: QGIS 3.36

Definition at line 1156 of file qgscodeeditor.cpp.

◆ selectionStart()

int QgsCodeEditor::selectionStart ( ) const

Convenience function to return the start of the selection as a linear index Contrary to the getSelection method, this method returns the cursor position if no selection is made.

Since: QGIS 3.36

Definition at line 1145 of file qgscodeeditor.cpp.

◆ sessionHistoryCleared

void QgsCodeEditor::sessionHistoryCleared ( )

signal

Emitted when the history of commands run in the current session is cleared.

Since: QGIS 3.30

◆ setColor()

void QgsCodeEditor::setColor	(	QgsCodeEditorColorScheme::ColorRole	role,
		const QColor &	color
	)

static

Sets the color to use in the editor for the specified role.

This color will be stored as the new default color for the role, to be used for all code editors.

Set color to an invalid QColor in order to clear the stored color value and reset it to the default color.

See also: color()

Since: QGIS 3.16

Definition at line 1007 of file qgscodeeditor.cpp.

◆ setCustomAppearance()

void QgsCodeEditor::setCustomAppearance	(	const QString &	scheme = `QString()`,
		const QMap< QgsCodeEditorColorScheme::ColorRole, QColor > &	customColors = `QMap< QgsCodeEditorColorScheme::ColorRole, QColor >()`,
		const QString &	fontFamily = `QString()`,
		int	fontSize = `0`
	)

Sets a custom appearance for the widget, disconnecting it from using the standard appearance taken from QSettings.

Note: Not available in Python bindings

Since: QGIS 3.16

Definition at line 1058 of file qgscodeeditor.cpp.

◆ setFoldingVisible()

void QgsCodeEditor::setFoldingVisible ( bool folding )

Set whether the folding controls are visible in the editor.

See also: foldingVisible()

Definition at line 568 of file qgscodeeditor.cpp.

◆ setHistoryFilePath()

void QgsCodeEditor::setHistoryFilePath ( const QString & path )

Sets the file path to use for recording and retrieving previously executed commands.

Note: Applies to code editors in the QgsCodeEditor::Mode::CommandInput mode only.

Since: QGIS 3.30

Definition at line 1105 of file qgscodeeditor.cpp.

◆ setInterpreter()

void QgsCodeEditor::setInterpreter ( QgsCodeInterpreter * newInterpreter )

Sets an attached code interpreter for executing commands when the editor is in the QgsCodeEditor::Mode::CommandInput mode.

See also: interpreter()

Since: QGIS 3.30

Definition at line 701 of file qgscodeeditor.cpp.

◆ setLinearPosition()

void QgsCodeEditor::setLinearPosition ( int position )

Convenience function to set the cursor position as a linear index.

Since: QGIS 3.36

Definition at line 1138 of file qgscodeeditor.cpp.

◆ setLinearSelection()

void QgsCodeEditor::setLinearSelection	(	int	start,
		int	end
	)

Convenience function to set the selection using linear indexes.

Since: QGIS 3.36

Definition at line 1167 of file qgscodeeditor.cpp.

◆ setLineNumbersVisible()

void QgsCodeEditor::setLineNumbersVisible ( bool visible )

Sets whether line numbers should be visible in the editor.

Defaults to false.

See also: lineNumbersVisible()

Since: QGIS 3.16

Definition at line 544 of file qgscodeeditor.cpp.

◆ setMarginVisible()

void QgsCodeEditor::setMarginVisible ( bool margin )

Set margin visible state.

Parameters

margin Set margin in the editor

Deprecated:: QGIS 3.40. Use base class methods for individual margins instead, or setLineNumbersVisible().

Definition at line 523 of file qgscodeeditor.cpp.

◆ setTitle()

void QgsCodeEditor::setTitle ( const QString & title )

Set the widget title.

Parameters

title widget title

Definition at line 478 of file qgscodeeditor.cpp.

◆ showHistory

void QgsCodeEditor::showHistory ( )

slot

Shows the command history dialog.

Note: Applies to code editors in the QgsCodeEditor::Mode::CommandInput mode only.

Since: QGIS 3.30

Definition at line 884 of file qgscodeeditor.cpp.

◆ showMessage()

void QgsCodeEditor::showMessage	(	const QString &	title,
		const QString &	message,
		Qgis::MessageLevel	level
	)

protectedvirtual

Shows a user facing message (eg a warning message).

The default implementation uses QMessageBox.

Since: QGIS 3.32

Definition at line 667 of file qgscodeeditor.cpp.

◆ showNextCommand

void QgsCodeEditor::showNextCommand ( )

slot

Shows the next command from the session in the editor.

Note: Applies to code editors in the QgsCodeEditor::Mode::CommandInput mode only.

Since: QGIS 3.30

Definition at line 874 of file qgscodeeditor.cpp.

◆ showPreviousCommand

void QgsCodeEditor::showPreviousCommand ( )

slot

Shows the previous command from the session in the editor.

Note: Applies to code editors in the QgsCodeEditor::Mode::CommandInput mode only.

Since: QGIS 3.30

Definition at line 864 of file qgscodeeditor.cpp.

◆ toggleComment

void QgsCodeEditor::toggleComment ( )

virtualslot

Toggle comment for the selected text.

This is only supported for editors which return the Qgis::ScriptLanguageCapability::ToggleComment capability from languageCapabilities().

Since: QGIS 3.32

Definition at line 794 of file qgscodeeditor.cpp.

◆ updatePrompt()

void QgsCodeEditor::updatePrompt ( )

protected

Triggers an update of the interactive prompt part of the editor.

Note: Applies to code editors in the QgsCodeEditor::Mode::CommandInput mode only.

Since: QGIS 3.30

Definition at line 687 of file qgscodeeditor.cpp.

◆ updateSoftHistory()

void QgsCodeEditor::updateSoftHistory ( )

protected

Updates the soft history by storing the current editor text in the history.

Since: QGIS 3.30

Definition at line 635 of file qgscodeeditor.cpp.

◆ wrapPosition()

int QgsCodeEditor::wrapPosition ( int line = -1 )

Returns the linear position of the start of the last wrapped part for the specified line, or for the current line if line = -1 If wrapping is disabled, returns -1 instead.

Since: QGIS 3.40

Definition at line 1184 of file qgscodeeditor.cpp.

◆ writeHistoryFile

bool QgsCodeEditor::writeHistoryFile ( )

slot

Stores the commands executed in the editor to the persistent history file.

Since: QGIS 3.30

Definition at line 842 of file qgscodeeditor.cpp.

Member Data Documentation

◆ SEARCH_RESULT_INDICATOR

constexpr int QgsCodeEditor::SEARCH_RESULT_INDICATOR = QsciScintilla::INDIC_MAX - 1

staticconstexpr

Indicator index for search results.

Definition at line 161 of file qgscodeeditor.h.

◆ sTreeCodeEditor

QgsSettingsTreeNode* QgsCodeEditor::sTreeCodeEditor = QgsSettingsTree::sTreeGui->createChildNode( QStringLiteral( "code-editor" ) )

inlinestatic

Definition at line 109 of file qgscodeeditor.h.

The documentation for this class was generated from the following files:

/build/qgis-3.41.0+git20241110+fda2aa46e9a+99sid/src/gui/codeeditors/qgscodeeditor.h
/build/qgis-3.41.0+git20241110+fda2aa46e9a+99sid/src/gui/codeeditors/qgscodeeditor.cpp

Public Types

Public Slots

Signals

Public Member Functions

Static Public Member Functions

Static Public Attributes

Protected Member Functions

Static Protected Member Functions

Detailed Description

Member Typedef Documentation

◆ Flags

Member Enumeration Documentation

◆ Flag

◆ MarginRole

◆ Mode

Constructor & Destructor Documentation

◆ QgsCodeEditor()

Member Function Documentation

◆ addWarning()

◆ callTip()

◆ checkSyntax

◆ clearPersistentHistory

◆ clearSessionHistory

◆ clearWarnings()

◆ color()

◆ contextMenuEvent()

◆ defaultColor()

◆ eventFilter()

◆ focusOutEvent()

◆ foldingVisible()

◆ getMonospaceFont()

◆ history()

◆ initializeLexer()

◆ insertText()

◆ interpreter()

◆ isCursorOnLastLine()

◆ isFixedPitch()

◆ keyPressEvent()

◆ language()

◆ languageCapabilities()

◆ languageToString()

◆ lexerColor()

◆ lexerFont()

◆ linearPosition()

◆ lineNumbersVisible()

◆ marginVisible()

◆ mode()

◆ moveCursorToEnd

◆ moveCursorToStart

◆ persistentHistoryCleared

◆ populateContextMenu()

◆ reformatCode

◆ reformatCodeString()

◆ removeHistoryCommand

◆ runCommand

◆ runPostLexerConfigurationTasks()

◆ selectionEnd()

◆ selectionStart()

◆ sessionHistoryCleared

◆ setColor()

◆ setCustomAppearance()

◆ setFoldingVisible()

◆ setHistoryFilePath()

◆ setInterpreter()

◆ setLinearPosition()

◆ setLinearSelection()

◆ setLineNumbersVisible()

◆ setMarginVisible()

◆ setTitle()

◆ showHistory

◆ showMessage()

◆ showNextCommand

◆ showPreviousCommand

◆ toggleComment

◆ updatePrompt()

◆ updateSoftHistory()

◆ wrapPosition()

◆ writeHistoryFile

Member Data Documentation

◆ SEARCH_RESULT_INDICATOR