Member Qgis::SetCrs: since QGIS 3.6 – no longer used by QGIS and will be removed in QGIS 4.0
Member QgisInterface::actionZoomToLayer ()=0: Use actionZoomToLayers() instead.
Member QgisInterface::openURL (const QString &url, bool useQgisDocDirectory=true)=0: Use QDesktopServices instead
Member QgsAbstractDataSourceWidget::progress (int, int): Since QGIS 3.4 this signal is no longer used. Use QgsProxyProgressTask instead to show progress reports.
Member QgsAbstractRelationEditorWidget::label () const: since QGIS 3.20 label is handled directly in QgsAttributeForm.
Member QgsAbstractRelationEditorWidget::setShowLabel (bool showLabel): since QGIS 3.20 label is handled directly in QgsAttributeForm.
Member QgsAbstractRelationEditorWidget::setTitle (const QString &title): since QGIS 3.20 label is handled directly in QgsAttributeForm.
Member QgsAbstractRelationEditorWidget::showLabel () const: since QGIS 3.20 label is handled directly in QgsAttributeForm.
Member QgsAbstractRelationEditorWidget::updateTitle (): since QGIS 3.20 label is handled directly in QgsAttributeForm.
Member QgsAdvancedDigitizingDockWidget::currentPoint (bool *exists=nullptr) const: since QGIS 3.22. Use currentPointV2() instead.
Member QgsAdvancedDigitizingDockWidget::penultimatePoint (bool *exists=nullptr) const: since QGIS 3.22. Use penultimatePointV2() instead.
Member QgsAdvancedDigitizingDockWidget::pointChanged (const QgsPointXY &point): since QGIS 3.22. No longer used, will be removed in QGIS 4.0. Use pointChangedV2 instead.
Member QgsAdvancedDigitizingDockWidget::previousPoint (bool *exists=nullptr) const: since QGIS 3.22. Use previousPointV2() instead.
Member QgsAnnotation::frameOffsetFromReferencePoint () const: use frameOffsetFromReferencePointMm() instead
Member QgsAnnotation::frameSize () const: use frameSizeMm() instead
Member QgsAnnotation::setFrameOffsetFromReferencePoint (QPointF offset): use setFrameOffsetFromReferencePointMm() instead
Member QgsAnnotation::setFrameSize (QSizeF size): use setFrameSizeMm() instead
Member QgsAttributeEditorRelation::Button: since QGIS 3.18 use QgsRelationEditorWidget::Button instead
Member QgsAttributeEditorRelation::QgsAttributeEditorRelation (const QString &name, const QString &relationId, QgsAttributeEditorElement *parent): since QGIS 3.0.2.
Member QgsAttributeEditorRelation::QgsAttributeEditorRelation (const QString &name, const QgsRelation &relation, QgsAttributeEditorElement *parent): since QGIS 3.0.2.
Member QgsAttributeForm::attributeChanged (const QString &attribute, const QVariant &value): since 3.0
Member QgsAttributeForm::Mode: Use QgsAttributeEditorContext::Mode instead.
Member QgsAttributeFormEditorWidget::valueChanged (const QVariant &value): since QGIS 3.10 use valuesChanged instead
Member QgsAttributeTableFilterModel::extentsChanged (): since QGIS 3.10.3 - made private as reloadVisible()
Member QgsAuthMethodRegistry::library (const QString &authMethodKey) const: since QGIS 3.22 - methods may not need to be loaded from a library (empty string returned)
Member QgsBlockingNetworkRequest::downloadFinished (): Use the finished() signal instead.
Member QgsBrowserDockWidget::addFavorite (): will be removed in QGIS 4.0 - use the methods in QgsBrowserModel instead
Member QgsBrowserDockWidget::addFavoriteDirectory (): will be removed in QGIS 4.0 - use the methods in QgsBrowserModel instead
Member QgsBrowserDockWidget::addFavoriteDirectory (const QString &favDir, const QString &name=QString()): will be removed in QGIS 4.0 - use the methods in QgsBrowserModel instead
Member QgsBrowserDockWidget::addLayerAtIndex (const QModelIndex &index): will be removed in QGIS 4.0 - retrieve the QgsLayerItem itself and manually add to project.
Member QgsBrowserDockWidget::addSelectedLayers (): will be removed in QGIS 4.0 – this method is not intended for public use
Member QgsBrowserDockWidget::enablePropertiesWidget (bool enable): will be removed in QGIS 4.0 – this method is not intended for public use
Member QgsBrowserDockWidget::hideItem (): will be removed in QGIS 4.0 – this method is not intended for public use
Member QgsBrowserDockWidget::removeFavorite (): will be removed in QGIS 4.0 - use the methods in QgsBrowserModel instead
Member QgsBrowserDockWidget::selectionChanged (const QItemSelection &selected, const QItemSelection &deselected): will be removed in QGIS 4.0 – this method is not intended for public use
Member QgsBrowserDockWidget::setActiveIndex (const QModelIndex &index): will be removed in QGIS 4.0 – this method is not intended for public use
Member QgsBrowserDockWidget::setCaseSensitive (bool caseSensitive): will be removed in QGIS 4.0 – this method is not intended for public use
Member QgsBrowserDockWidget::setFilter (): will be removed in QGIS 4.0 – this method is not intended for public use
Member QgsBrowserDockWidget::setFilterSyntax (QAction *): will be removed in QGIS 4.0 – this method is not intended for public use
Member QgsBrowserDockWidget::showContextMenu (QPoint): will be removed in QGIS 4.0 – this method is not intended for public use
Member QgsBrowserDockWidget::showFilterWidget (bool visible): will be removed in QGIS 4.0 – this method is not intended for public use
Member QgsBrowserDockWidget::showProperties (): will be removed in QGIS 4.0 – this method is not intended for public use
Member QgsBrowserDockWidget::splitterMoved (): no longer used.
Member QgsBrowserDockWidget::toggleFastScan (): will be removed in QGIS 4.0
Member QgsBrowserDockWidget::updateProjectHome (): will be removed in QGIS 4.0 – this method is not intended for public use
Member QgsBrowserModel::connectItem (QgsDataItem *item): Deprecated since QGIS 3.4 – this method has no effect, and is dangerous to call in earlier QGIS versions.
Member QgsCadUtils::AlignMapPointOutput::edgeMatch: will be removed in QGIS 4.0 - use snapMatch instead
Member QgsCallout::labelAnchorGeometry (const QRectF &bodyBoundingBox, const double angle, LabelAnchorPoint anchor) const: QGIS 3.20 use calloutLabelPoint() instead
Member QgsCategorizedSymbolRenderer::skipRender (): No longer used, will be removed in QGIS 4.0
Member QgsCategorizedSymbolRenderer::symbolForValue (const QVariant &value) const: use variant which takes a second bool argument instead.
Member QgsCodeEditor::marginVisible (): Use base class methods for individual margins instead, or lineNumbersVisible()
Member QgsCodeEditor::setMarginVisible (bool margin): Use base class methods for individual margins instead, or setLineNumbersVisible()
Member QgsCoordinateReferenceSystem::createFromId (long id, CrsType type=PostgisCrsId): QGIS 3.10 We encourage you to use EPSG code or WKT to describe CRSes in your code wherever possible. Internal QGIS CRS IDs are not guaranteed to be permanent / involatile, and Proj strings are a lossy format.
Member QgsCoordinateReferenceSystem::createFromProj4 (const QString &projString): QGIS 3.10 Use createFromProj() instead
Member QgsCoordinateReferenceSystem::createFromSrid (long srid): QGIS 3.10 Use alternative methods for SRS construction instead – this method was specifically created for use by the postgres provider alone, and using it elsewhere will lead to subtle bugs.
Member QgsCoordinateReferenceSystem::findMatchingProj (): QGIS 3.10 Not used in Proj >= 6 based builds
Member QgsCoordinateReferenceSystem::fromProj4 (const QString &proj4): QGIS 3.10 Use fromProj() instead.
Member QgsCoordinateReferenceSystem::QgsCoordinateReferenceSystem (long id, CrsType type=PostgisCrsId): QGIS 3.10 We encourage you to use EPSG codes or WKT to describe CRSes in your code wherever possible. Internal QGIS CRS IDs are not guaranteed to be permanent / involatile, and Proj strings are a lossy format.
Member QgsCoordinateReferenceSystem::recentProjections (): QGIS 3.10 Use recentCoordinateReferenceSystems() instead.
Member QgsCoordinateReferenceSystem::setupESRIWktFix (): QGIS 3.10 Not used on builds based on Proj version 6 or later
Member QgsCoordinateReferenceSystem::toProj4 () const: QGIS 3.10 Use toProj() instead.
Member QgsCoordinateTransform::destinationDatumTransformId () const: Unused on builds based on Proj 6.0 or later
Member QgsCoordinateTransform::QgsCoordinateTransform (const QgsCoordinateReferenceSystem &source, const QgsCoordinateReferenceSystem &destination, int sourceDatumTransformId, int destinationDatumTransformId): will be removed in QGIS 4.0. Use the constructor with a QgsCoordinateTransformContext argument instead.
Member QgsCoordinateTransform::setDestinationDatumTransformId (int datumId): Unused on builds based on Proj 6.0 or later
Member QgsCoordinateTransform::setSourceDatumTransformId (int datumId): Unused on builds based on Proj 6.0 or later
Member QgsCoordinateTransform::sourceDatumTransformId () const: Unused on builds based on Proj 6.0 or later
Member QgsCoordinateTransformContext::addSourceDestinationDatumTransform (const QgsCoordinateReferenceSystem &sourceCrs, const QgsCoordinateReferenceSystem &destinationCrs, int sourceTransformId, int destinationTransformId): Has no effect on builds based on Proj 6.0 or later, use addCoordinateOperation() instead.
Member QgsCoordinateTransformContext::calculateDatumTransforms (const QgsCoordinateReferenceSystem &source, const QgsCoordinateReferenceSystem &destination) const: Has no effect on builds based on Proj 6.0 or later. Use calculateCoordinateOperation() instead.
Member QgsCoordinateTransformContext::removeSourceDestinationDatumTransform (const QgsCoordinateReferenceSystem &sourceCrs, const QgsCoordinateReferenceSystem &destinationCrs): Use removeCoordinateOperation() instead
Member QgsCoordinateTransformContext::sourceDestinationDatumTransforms () const: Has no effect on builds based on Proj 6.0 or later, use coordinateOperations() instead.
Member QgsCustomDropHandler::handleMimeData (const QMimeData *data): since QGIS 3.10 - use handleMimeDataV2() instead.
Member QgsDataItem::acceptDrop (): QGIS 3.10
Member QgsDataItem::handleDrop (const QMimeData *, Qt::DropAction): QGIS 3.10
Member QgsDataItem::mimeUri () const: since QGIS 3.18, use mimeUris() instead
Member QgsDataItem::paramWidget (): QGIS 3.10
Member QgsDataItem::rename (const QString &name): QGIS 3.10
Member QgsDataItem::setCapabilities (int capabilities): use setCapabilitiesV2 instead.
Member QgsDataItem::setCrs (const QgsCoordinateReferenceSystem &crs): since QGIS 3.6. This method is no longer used by QGIS and will be removed in QGIS 4.0.
Member QgsDatumTransform::datumTransformations (const QgsCoordinateReferenceSystem &source, const QgsCoordinateReferenceSystem &destination): Not used for builds based on Proj >= 6.0
Member QgsDatumTransform::datumTransformInfo (int datumTransformId): Not used for builds based on Proj >= 6.0
Member QgsDatumTransform::datumTransformToProj (int datumTransformId): Not used for builds based on Proj >= 6.0
Member QgsDatumTransform::projStringToDatumTransformId (const QString &string): Not used for builds based on Proj >= 6.0
Class QgsDatumTransform::TransformInfo: Not used on builds based on Proj >= 6.0
Class QgsDatumTransform::TransformPair: Not used for builds based on Proj >= 6.0
Member QgsDualView::setFilteredFeatures (const QgsFeatureIds &filteredFeatures): since filterFeatures is handled in the attribute filter model itself
Member QgsDxfExport::registerDxfLayer (const QString &layerId, QgsFeatureId fid, const QString &layer): Will be made private in QGIS 4
Member QgsEditFormConfig::attributeEditorElementFromDomElement (QDomElement &elem, QgsAttributeEditorElement *parent, const QString &layerId=QString(), const QgsReadWriteContext &context=QgsReadWriteContext()): since QGIS 3.18 use QgsAttributeEditorElement::create instead
Member QgsEditorWidgetWrapper::setValue (const QVariant &value): since QGIS 3.10
Member QgsEditorWidgetWrapper::valueChanged (const QVariant &value): since QGIS 3.10 use valuesChanged signal instead
Member QgsEllipseSymbolLayer::setSymbolName (const QString &name): since QGIS 3.20
Member QgsEllipseSymbolLayer::symbolName () const: since QGIS 3.20
Member QgsExpressionBuilderWidget::findExpressions (const QString &label): since QGIS 3.14 use expressionTree()->findExpressions instead
Member QgsExpressionBuilderWidget::loadFieldNames (): since QGIS 3.14 this is now done automatically
Member QgsExpressionBuilderWidget::loadFieldNames (const QgsFields &fields): since QGIS 3.14 use expressionTree()->loadFieldNames() instead
Member QgsExpressionBuilderWidget::loadFieldsAndValues (const QMap< QString, QStringList > &fieldValues): since QGIS 3.14 this will not do anything, use setLayer() instead
Member QgsExpressionBuilderWidget::loadRecent (const QString &collection=QStringLiteral("generic")): since QGIS 3.14 use expressionTree()->loadRecent() instead
Member QgsExpressionBuilderWidget::loadUserExpressions (): since QGIS 3.14 use expressionTree()->loadUserExpressions() instead
Member QgsExpressionBuilderWidget::model (): since QGIS 3.14
Member QgsExpressionBuilderWidget::removeFromUserExpressions (const QString &label): since QGIS 3.14 use expressionTree()->removeFromUserExpressions() instead
Member QgsExpressionBuilderWidget::saveToRecent (const QString &collection="generic"): since QGIS 3.14 use expressionTree()->saveRecent() instead
Member QgsExpressionBuilderWidget::saveToUserExpressions (const QString &label, const QString &expression, const QString &helpText): since QGIS 3.14 use expressionTree()->saveToUserExpressions() instead
Member QgsExpressionTreeView::model (): since QGIS 3.14
Member QgsFeatureFilterModel::identifierField () const: since QGIS 3.10 use identifierFields instead
Member QgsFeatureListComboBox::identifierField () const: since QGIS 3.10
Member QgsFeatureListComboBox::identifierValue () const: since QGIS 3.10
Member QgsFeatureListComboBox::setIdentifierField (const QString &identifierField): since QGIS 3.10
Member QgsFeatureListComboBox::setIdentifierValue (const QVariant &identifierValue): since QGIS 3.10 use setIdentifierValues
Member QgsFeatureListModel::onBeginInsertRows (const QModelIndex &parent, int first, int last): use beginInsertRows() instead
Member QgsFeatureListModel::onBeginRemoveRows (const QModelIndex &parent, int first, int last): Use beginRemoveRows() instead
Member QgsFeatureListModel::onEndInsertRows (const QModelIndex &parent, int first, int last): use endInsertRows() instead
Member QgsFeatureListModel::onEndRemoveRows (const QModelIndex &parent, int first, int last): Use endRemoveRows() instead
Member QgsFeaturePickerModelBase::IdentifierValueRole: Use IdentifierValuesRole instead
Member QgsFeatureRequest::connectionTimeout () const: Use timeout() instead.
Member QgsFeatureRequest::setConnectionTimeout (int connectionTimeout): Use setTimeout() instead.
Member QgsFieldConditionalFormatWidget::loadStyle (const QgsConditionalStyle &style) SIP_DEPRECATED: no longer used, use QgsEditConditionalFormatRuleWidget::loadStyle instead.
Member QgsFieldConditionalFormatWidget::reset () SIP_DEPRECATED: no longer used, will be removed in QGIS 4.0
Member QgsFieldConditionalFormatWidget::viewRules () SIP_DEPRECATED: no longer used, will be removed in QGIS 4.0
Member QgsGeometry::createPolygonFromQPolygonF (const QPolygonF &polygon): use QgsGeometry::fromQPolygonF() or QgsLineString::fromQPolygonF() instead.
Member QgsGeometry::createPolylineFromQPolygonF (const QPolygonF &polygon): use QgsGeometry::fromQPolygonF() or QgsLineString::fromQPolygonF() instead.
Member QgsGeometry::splitGeometry (const QVector< QgsPointXY > &splitLine, QVector< QgsGeometry > &newGeometries, bool topological, QVector< QgsPointXY > &topologyTestPoints, bool splitFeature=true): since QGIS 3.12 - will be removed in QGIS 4.0. Use the variant which accepts QgsPoint objects instead of QgsPointXY.
Member QgsGeometryCheck::resolutionMethods () const: since QGIS 3.12, use availableResolutionMethods() instead
Member QgsGeometryUtils::setZValueFromPoints (const QgsPointSequence &points, QgsPoint &point): since QGIS 3.20 use transferFirstZValueToPoint( const QgsPointSequence &points, QgsPoint &point ) instead
Member QgsGraduatedSymbolRenderer::astride () const: since QGIS 3.10 use classficationMethod instead
Member QgsGraduatedSymbolRenderer::calcEqualIntervalBreaks (double minimum, double maximum, int classes, bool useSymmetricMode, double symmetryPoint, bool astride): since QGIS 3.10 use QgsClassificationEqualInterval class instead
Member QgsGraduatedSymbolRenderer::createRenderer (QgsVectorLayer *vlayer, const QString &attrName, int classes, Mode mode, QgsSymbol *symbol, QgsColorRamp *ramp, const QgsRendererRangeLabelFormat &legendFormat=QgsRendererRangeLabelFormat(), bool useSymmetricMode=false, double symmetryPoint=0.0, const QStringList &listForCboPrettyBreaks=QStringList(), bool astride=false): since QGIS 3.10
Member QgsGraduatedSymbolRenderer::labelFormat () const: since QGIS 3.10 use classificationMethod() and QgsClassificationMethod::setLabelFormat instead
Member QgsGraduatedSymbolRenderer::makeBreaksSymmetric (QList< double > &breaks, double symmetryPoint, bool astride): since QGIS 3.10, use QgsClassificationMethod::makeBreaksSymmetric instead
Member QgsGraduatedSymbolRenderer::Mode: since QGIS 3.10 use QgsClassificationMethod::MethodId instead
Member QgsGraduatedSymbolRenderer::mode () const: since QGIS 3.10 use classficationMethod instead
Member QgsGraduatedSymbolRenderer::setAstride (bool astride): since QGIS 3.10 use classficationMethod instead
Member QgsGraduatedSymbolRenderer::setLabelFormat (const QgsRendererRangeLabelFormat &labelFormat, bool updateRanges=false): since QGIS 3.10 use classificationMethod() and QgsClassificationMethod::setLabelFormat instead
Member QgsGraduatedSymbolRenderer::setMode (Mode mode): since QGIS 3.10 use classficationMethod instead
Member QgsGraduatedSymbolRenderer::setSymmetryPoint (double symmetryPoint): since QGIS 3.10 use classficationMethod instead
Member QgsGraduatedSymbolRenderer::setUseSymmetricMode (bool useSymmetricMode): since QGIS 3.10 use classficationMethod instead
Member QgsGraduatedSymbolRenderer::symmetryPoint () const: since QGIS 3.10 use classficationMethod instead
Member QgsGraduatedSymbolRenderer::updateClasses (QgsVectorLayer *vlayer, Mode mode, int nclasses, bool useSymmetricMode=false, double symmetryPoint=0.0, bool astride=false): since QGIS 3.10
Member QgsGraduatedSymbolRenderer::useSymmetricMode () const: since QGIS 3.10 use classficationMethod instead
Member QgsInterpolatedLineSymbolLayer::endValueExpressionForColor () const: use dataDefinedProperty( QgsSymbolLayer::PropertyLineEndColorValue ) instead.
Member QgsInterpolatedLineSymbolLayer::endValueExpressionForWidth () const: use dataDefinedProperty( QgsSymbolLayer::PropertyLineEndWidthValue ) instead.
Member QgsInterpolatedLineSymbolLayer::setExpressionsStringForColor (const QString &start, const QString &end): use setDataDefinedProperty( QgsSymbolLayer::PropertyLineStartColorValue ) and setDataDefinedProperty( QgsSymbolLayer::PropertyLineEndColorValue ) instead
Member QgsInterpolatedLineSymbolLayer::setExpressionsStringForWidth (const QString &start, const QString &end): use setDataDefinedProperty( QgsSymbolLayer::PropertyLineStartWidthValue ) and setDataDefinedProperty( QgsSymbolLayer::PropertyLineEndWidthValue ) instead
Member QgsInterpolatedLineSymbolLayer::startValueExpressionForColor () const: use dataDefinedProperty( QgsSymbolLayer::PropertyLineStartColorValue ) instead.
Member QgsInterpolatedLineSymbolLayer::startValueExpressionForWidth () const: use dataDefinedProperty( QgsSymbolLayer::PropertyLineStartWidthValue ) instead.
Member QgsLabelingEngineSettings::numCandidatePositions (int &candPoint, int &candLine, int &candPolygon) const: since QGIS 3.12 use maximumPolygonCandidatesPerCmSquared() and maximumLineCandidatesPerCm() instead.
Member QgsLabelingEngineSettings::searchMethod () const: since QGIS 3.10 - Chain is always used.
Member QgsLabelingEngineSettings::setNumCandidatePositions (int candPoint, int candLine, int candPolygon): since QGIS 3.12 use setMaximumPolygonCandidatesPerCmSquared() and setMaximumLineCandidatesPerCm() instead.
Member QgsLabelingEngineSettings::setSearchMethod (Search s): since QGIS 3.10 - Chain is always used.
Member QgsLabelSearchTree::clear (): has no effect since QGIS 3.12
Member QgsLayerItem::deleteLayer (): QGIS 3.10
Member QgsLayerTreeModelLegendNode::ItemContext::labelXOffset: use columnLeft, columnRight instead.
Member QgsLayerTreeModelLegendNode::ItemContext::point: Use top, columnLeft, columnRight instead.
Member QgsLayerTreeRegistryBridge::setLayerInsertionPoint (QgsLayerTreeGroup *parentGroup, int index): since QGIS 3.10 use setLayerInsertionPoint( const InsertionPoint &insertionPoint ) instead
Member QgsLayerTreeViewDefaultActions::actionMakeTopLevel (QObject *parent=nullptr): since QGIS 3.2, use actionMoveOutOfGroup()
Member QgsLayerTreeViewDefaultActions::actionZoomToLayer (QgsMapCanvas *canvas, QObject *parent=nullptr): since QGIS 3.18, use actionZoomToLayers()
Member QgsLayerTreeViewDefaultActions::makeTopLevel (): since QGIS 3.2, use moveOutOfGroup()
Member QgsLayerTreeViewDefaultActions::zoomToLayer (): since QGIS 3.18, use zoomToLayers()
Member QgsLayerTreeViewDefaultActions::zoomToLayer (QgsMapCanvas *canvas): since QGIS 3.18, use zoomToLayers()
Member QgsLayoutCustomDropHandler::handleFileDrop (QgsLayoutDesignerInterface *iface, const QString &file): use the version which specifies a drop location instead.
Member QgsLayoutItem::numberExportLayers () const: Use nextExportPart() and exportLayerBehavior() instead.
Member QgsLayoutItemMapGrid::annotationFont () const: use annotationTextFormat() instead
Member QgsLayoutItemMapGrid::annotationFontColor () const: use annotationTextFormat() instead
Member QgsLayoutItemMapGrid::setAnnotationFont (const QFont &font): use setAnnotationTextFormat() instead
Member QgsLayoutItemMapGrid::setAnnotationFontColor (const QColor &color): use setAnnotationTextFormat() instead
Member QgsLayoutItemScaleBar::brush () const: use fillSymbol() instead
Member QgsLayoutItemScaleBar::brush2 () const: use alternateFillSymbol() instead
Member QgsLayoutItemScaleBar::fillColor () const: use fillSymbol() instead
Member QgsLayoutItemScaleBar::fillColor2 () const: use alternateFillSymbol() instead
Member QgsLayoutItemScaleBar::font () const: use textFormat() instead
Member QgsLayoutItemScaleBar::fontColor () const: use textFormat() instead
Member QgsLayoutItemScaleBar::lineCapStyle () const: use lineSymbol() instead
Member QgsLayoutItemScaleBar::lineColor () const: use lineSymbol() instead
Member QgsLayoutItemScaleBar::lineJoinStyle () const: use lineSymbol() instead
Member QgsLayoutItemScaleBar::lineWidth () const: use lineSymbol() instead
Member QgsLayoutItemScaleBar::pen () const: use lineSymbol() instead
Member QgsLayoutItemScaleBar::setFillColor (const QColor &color): use setFillSymbol() instead
Member QgsLayoutItemScaleBar::setFillColor2 (const QColor &color): use setAlternateFillSymbol() instead
Member QgsLayoutItemScaleBar::setFont (const QFont &font): use setTextFormat() instead
Member QgsLayoutItemScaleBar::setFontColor (const QColor &color): use setTextFormat() instead
Member QgsLayoutItemScaleBar::setLineCapStyle (Qt::PenCapStyle style): use setLineSymbol() instead
Member QgsLayoutItemScaleBar::setLineColor (const QColor &color): use setLineSymbol() instead
Member QgsLayoutItemScaleBar::setLineJoinStyle (Qt::PenJoinStyle style): use setLineSymbol() instead
Member QgsLayoutItemScaleBar::setLineWidth (double width): use setLineSymbol() instead
Member QgsLayoutPageCollection::pageStyleSymbol () const: Use QgsLayoutItemPage::pageStyleSymbol() instead.
Member QgsLayoutRenderContext::currentExportLayer () const: Items should now handle this themselves, via QgsLayoutItem::exportLayerBehavior() and returning QgsLayoutItem::nextExportPart().
Member QgsLayoutRenderContext::setCurrentExportLayer (int layer=-1): Items should now handle this themselves, via QgsLayoutItem::exportLayerBehavior() and returning QgsLayoutItem::nextExportPart().
Member QgsLayoutReportContext::predefinedScales () const: Use QgsLayoutRenderContext::predefinedScales()
Member QgsLayoutReportContext::setPredefinedScales (const QVector< qreal > &scales): Use QgsLayoutRenderContext::setPredefinedScales()
Member QgsLayoutTable::contentFont () const: use contextTextFormat() instead
Member QgsLayoutTable::contentFontColor () const: use contextTextFormat() instead
Member QgsLayoutTable::headerFont () const: use headerTextFormat() instead
Member QgsLayoutTable::headerFontColor () const: use headerTextFormat() instead
Member QgsLayoutTable::setContentFont (const QFont &font): use setContentTextFormat() instead
Member QgsLayoutTable::setContentFontColor (const QColor &color): use setContentTextFormat() instead
Member QgsLayoutTable::setHeaderFont (const QFont &font): use setHeaderTextFormat() instead
Member QgsLayoutTable::setHeaderFontColor (const QColor &color): use setHeaderTextFormat() instead
Member QgsLayoutTableColumn::clone (): since QGIS 3.14 use a copy instead
Member QgsLayoutTableColumn::setSortByRank (int rank): since QGIS 3.14 the order is now hold in a dedicated model
Member QgsLayoutTableColumn::sortByRank () const: since QGIS 3.14 the order is now hold in a dedicated model
Member QgsLayoutUtils::scaleFactorFromItemStyle (const QStyleOptionGraphicsItem *style): Use the variant with a QPainter argument instead
Member QgsLegendRenderer::drawLegend (QPainter *painter): Use the variant which accepts a QgsRenderContext instead.
Member QgsLegendSettings::dpi () const: Take dpi from render contexts instead.
Member QgsLegendSettings::mapScale () const: take this property from the render context instead
Member QgsLegendSettings::mapUnitsPerPixel () const: take these properties on render contexts instead
Member QgsLegendSettings::mmPerMapUnit () const: Use scale factor from render contexts instead.
Member QgsLegendSettings::setDpi (int dpi): Set dpi on render contexts instead.
Member QgsLegendSettings::setMapScale (double scale): set this property on the render context instead
Member QgsLegendSettings::setMapUnitsPerPixel (double mapUnitsPerPixel): set these properties on render contexts instead
Member QgsLegendSettings::setMmPerMapUnit (double mmPerMapUnit): Set scale factor on render contexts instead.
Member QgsLegendSettings::setUseAdvancedEffects (bool use): Set flag on render contexts instead.
Member QgsLegendSettings::useAdvancedEffects () const: Use flags from render contexts instead.
Member QgsLocator::prefixedFilters () const: since QGIS 3.2 use filters() instead
Member QgsMapLayer::hasDependencyCycle (const QSet< QgsMapLayerDependency > &) const: since QGIS 3.10
Member QgsMapLayer::metadataUrl () const: since QGIS 3.22
Member QgsMapLayer::metadataUrlFormat () const: since QGIS 3.22
Member QgsMapLayer::metadataUrlType () const: since QGIS 3.22
Member QgsMapLayer::setMetadataUrl (const QString &metaUrl): since QGIS 3.22
Member QgsMapLayer::setMetadataUrlFormat (const QString &metaUrlFormat): since QGIS 3.22
Member QgsMapLayer::setMetadataUrlType (const QString &metaUrlType): since QGIS 3.22
Member QgsMapLayerProxyModel::layerWhitelist (): use layerAllowlist() instead
Member QgsMapLayerProxyModel::setLayerWhitelist (const QList< QgsMapLayer * > &layers): use setLayerAllowList()
Member QgsMapRendererCache::init (const QgsRectangle &extent, double scale): since QGIS 3.18 - will be removed in QGIS 4.0. Use the updateParameters() and clear()
Member QgsMapRendererJob::drawLabeling (const QgsMapSettings &settings, QgsRenderContext &renderContext, QgsLabelingEngine *labelingEngine2, QPainter *painter): Will be removed in QGIS 4.0
Class QgsMapServiceException: Use QsgServerException
Member QgsMapSettings::customRenderFlags () const: use
Member QgsMapSettings::setCustomRenderFlags (const QString &customRenderFlags): use
Member QgsMapToolCapture::points () const: since QGIS 3.12 - will be removed in QGIS 4.0. Use the variant returns QgsPoint objects instead of QgsPointXY.
Member QgsMapToolCapture::setPoints (const QVector< QgsPointXY > &pointList): since QGIS 3.12 - will be removed in QGIS 4.0. Use the variant which accepts QgsPoint objects instead of QgsPointXY.
Member QgsMapToolEdit::addTopologicalPoints (const QVector< QgsPointXY > &vertices): since QGIS 3.12 - will be removed in QGIS 4.0. Use the variant which accepts QgsPoint objects instead of QgsPointXY.
Member QgsMapToPixel::toMapPoint (double x, double y) const: since QGIS 3.4 use toMapCoordinates instead
Member QgsMarkerLineSymbolLayer::rotateMarker () const: Use rotateSymbols() instead.
Member QgsMarkerLineSymbolLayer::setRotateMarker (bool rotate): Use setRotateSymbols() instead.
Member QgsMeshCalculator::expression_valid (const QString &formulaString, QgsMeshLayer *layer): QGIS 3.12 - use expressionIsValid
Member QgsMeshCalculator::QgsMeshCalculator (const QString &formulaString, const QString &outputFile, const QgsRectangle &outputExtent, double startTime, double endTime, QgsMeshLayer *layer): QGIS 3.12
Member QgsMeshCalculator::QgsMeshCalculator (const QString &formulaString, const QString &outputFile, const QgsGeometry &outputMask, double startTime, double endTime, QgsMeshLayer *layer): QGIS 3.12
Member QgsMeshDatasetSourceInterface::persistDatasetGroup (const QString &path, const QgsMeshDatasetGroupMetadata &meta, const QVector< QgsMeshDataBlock > &datasetValues, const QVector< QgsMeshDataBlock > &datasetActive, const QVector< double > &times): QGIS 3.12.3
Member QgsMeshDriverMetadata::QgsMeshDriverMetadata (const QString &name, const QString &description, const MeshDriverCapabilities &capabilities, const QString &writeDatasetOnFileSuffix): QGIS 3.22
Member QgsNetworkAccessManager::requestAboutToBeCreated (QNetworkAccessManager::Operation, const QNetworkRequest &, QIODevice *): Use the thread-safe requestAboutToBeCreated( QgsNetworkRequestParameters ) signal instead.
Member QgsNetworkAccessManager::requestCreated (QNetworkReply *): Use the thread-safe requestAboutToBeCreated( QgsNetworkRequestParameters ) signal instead.
Member QgsNewOgrConnection::showHelp () SIP_DEPRECATED: will be made private with QGIS 4
Member QgsNewVectorLayerDialog::runAndCreateLayer (QWidget *parent=nullptr, QString *enc=nullptr, const QgsCoordinateReferenceSystem &crs=QgsCoordinateReferenceSystem(), const QString &initialPath=QString()): since QGIS 3.4.5 - use execAndCreateLayer() instead.
Member QgsOpenClUtils::buildProgram (const cl::Context &context, const QString &source, ExceptionBehavior exceptionBehavior=Catch): since QGIS 3.6
Member QgsPalLayerSettings::DirectionSymbols: use QgsLabelLineSettings::DirectionSymbolPlacement instead
Member QgsPalLayerSettings::LinePlacementFlags: Use QgsLabeling::LinePlacementFlags instead
Member QgsPalLayerSettings::previewBkgrdColor: since QGIS 3.10.
Member QgsProcessingAlgorithm::helpString () const: Unused, will be removed in QGIS 4.0
Member QgsProcessingUtils::combineLayerExtents (const QList< QgsMapLayer * > &layers, const QgsCoordinateReferenceSystem &crs=QgsCoordinateReferenceSystem()): Use version with QgsProcessingContext argument instead
Member QgsProject::fileInfo () const: since QGIS 3.2 use absoluteFilePath(), baseName() or lastModifiedTime() instead
Member QgsProject::mapScales () const: Use viewSettings() instead
Member QgsProject::mapScalesChanged (): Use viewSettings() instead
Member QgsProject::nonIdentifiableLayers () const: since QGIS 3.4 use QgsMapLayer::setFlags() instead
Member QgsProject::nonIdentifiableLayersChanged (QStringList nonIdentifiableLayers): since QGIS 3.4
Member QgsProject::requiredLayers () const: since QGIS 3.4 use QgsMapLayer::flags() instead
Member QgsProject::setMapScales (const QVector< double > &scales): Use viewSettings() instead
Member QgsProject::setNonIdentifiableLayers (const QStringList &layerIds): since QGIS 3.4 use QgsMapLayer::setFlags() instead
Member QgsProject::setNonIdentifiableLayers (const QList< QgsMapLayer * > &layers): since QGIS 3.4 use QgsMapLayer::setFlags() instead
Member QgsProject::setRequiredLayers (const QSet< QgsMapLayer * > &layers): since QGIS 3.4 use QgsMapLayer::setFlags() instead
Member QgsProject::setUseProjectScales (bool enabled): Use viewSettings() instead
Member QgsProject::useProjectScales () const: Use viewSettings() instead
Member QgsProjectionSelectionTreeWidget::pushProjectionToFront (): Has no effect since QGIS 3.20
Member QgsProjectStorage::showLoadGui (): since QGIS 3.10 - use QgsProjectStorageGuiProvider for GUI-related project storage functionality
Member QgsProjectStorage::showSaveGui (): since QGIS 3.10 - use QgsProjectStorageGuiProvider for GUI-related project storage functionality
Member QgsProjectStorage::visibleName (): since QGIS 3.10 - use QgsProjectStorageGuiProvider for GUI-related project storage functionality
Member QgsProviderMetadata::createFunction () const: QGIS 3.10
Member QgsProviderMetadata::library () const: QGIS 3.10 - providers may not need to be loaded from a library (empty string returned)
Member QgsProviderMetadata::QgsProviderMetadata (const QString &key, const QString &description, const QgsProviderMetadata::CreateDataProviderFunction &createFunc): QGIS 3.10
Member QgsProviderRegistry::createProviderLibrary (const QString &providerKey) const: QGIS 3.10 - providers may not need to be loaded from a library
Member QgsProviderRegistry::createSelectionWidget (const QString &providerKey, QWidget *parent=nullptr, Qt::WindowFlags fl=Qt::WindowFlags(), QgsProviderRegistry::WidgetMode widgetMode=QgsProviderRegistry::WidgetMode::None): QGIS 3.10 - use QgsGui::sourceSelectProviderRegistry()->createDataSourceWidget() instead
Member QgsProviderRegistry::function (const QString &providerKey, const QString &functionName): QGIS 3.10 - any provider functionality should be accessed through QgsProviderMetadata
Member QgsProviderRegistry::library (const QString &providerKey) const: QGIS 3.10 - providers may not need to be loaded from a library (empty string returned)
Member QgsProviderRegistry::providerCapabilities (const QString &providerKey) const: QGIS 3.10 (use instead capabilities() method of individual data item provider)
Member QgsProviderRegistry::registerGuis (QWidget *widget): since QGIS 3.10 - does nothing - use QgsGui::providerGuiRegistry()
Member QgsRasterCalculator::QgsRasterCalculator (const QString &formulaString, const QString &outputFile, const QString &outputFormat, const QgsRectangle &outputExtent, int nOutputColumns, int nOutputRows, const QVector< QgsRasterCalculatorEntry > &rasterEntries): since QGIS 3.8, use the version with transformContext instead
Member QgsRasterCalculator::QgsRasterCalculator (const QString &formulaString, const QString &outputFile, const QString &outputFormat, const QgsRectangle &outputExtent, const QgsCoordinateReferenceSystem &outputCrs, int nOutputColumns, int nOutputRows, const QVector< QgsRasterCalculatorEntry > &rasterEntries): since QGIS 3.8, use the version with transformContext instead
Member QgsRasterFileWriter::writeRaster (const QgsRasterPipe *pipe, int nCols, int nRows, const QgsRectangle &outputExtent, const QgsCoordinateReferenceSystem &crs, QgsRasterBlockFeedback *feedback=nullptr): since QGIS 3.8, use version with transformContext instead
Member QgsRasterFileWriterTask::errorOccurred (int error): since QGIS 3.10. Use errorOccurred(int, const QString&)
Member QgsRasterFileWriterTask::QgsRasterFileWriterTask (const QgsRasterFileWriter &writer, QgsRasterPipe *pipe, int columns, int rows, const QgsRectangle &outputExtent, const QgsCoordinateReferenceSystem &crs): since QGIS 3.8, use version with transformContext instead
Member QgsRasterLayer::legendSymbologyItems () const: use QgsRasterRenderer::createLegendNodes() instead.
Member QgsRasterLayer::setDataProvider (const QString &provider): Use the version with ProviderOptions instead.
Member QgsRasterProjector::setCrs (const QgsCoordinateReferenceSystem &srcCRS, const QgsCoordinateReferenceSystem &destCRS, int srcDatumTransform=-1, int destDatumTransform=-1): since QGIS 3.8, use transformContext version instead
Member QgsRasterResampler::resample (const QImage &srcImage, QImage &dstImage)=0: since QGIS 3.10.1, use the more efficient QgsRasterResamplerV2 interface instead.
Member QgsRelationEditorWidget::duplicateFeature (): since QGIS 3.18, use duplicateSelectedFeatures() instead
Member QgsRelationReferenceSearchWidgetWrapper::onValueChanged (const QVariant &value): since QGIS 3.10 made private
Member QgsRelationReferenceWidget::foreignKey () const: since QGIS 3.10
Member QgsRelationReferenceWidget::foreignKeyChanged (const QVariant &): since QGIS 3.10
Member QgsRelationReferenceWidget::setForeignKey (const QVariant &value): since QGIS 3.10 use setForeignKeys
Member QgsRelationWidgetWrapper::label () const: since QGIS 3.20 label is handled directly in QgsAttributeForm.
Member QgsRelationWidgetWrapper::setLabel (const QString &label=QString()): since QGIS 3.20 label is handled directly in QgsAttributeForm.
Member QgsRelationWidgetWrapper::setShowLabel (bool showLabel): since QGIS 3.20 label is handled directly in QgsAttributeForm.
Member QgsRelationWidgetWrapper::setShowLinkButton (bool showLinkButton): since QGIS 3.16 use setVisibleButtons() instead
Member QgsRelationWidgetWrapper::setShowSaveChildEditsButton (bool showChildEdits): since QGIS 3.16 use setVisibleButtons() instead
Member QgsRelationWidgetWrapper::setShowUnlinkButton (bool showUnlinkButton): since QGIS 3.16 use setVisibleButtons() instead
Member QgsRelationWidgetWrapper::setVisibleButtons (const QgsAttributeEditorRelation::Buttons &buttons): since QGIS 3.18 use setWidgetConfig() instead
Member QgsRelationWidgetWrapper::showLabel () const: since QGIS 3.20 label is handled directly in QgsAttributeForm.
Member QgsRelationWidgetWrapper::showLinkButton () const: since QGIS 3.16 use visibleButtons() instead
Member QgsRelationWidgetWrapper::showSaveChildEditsButton () const: since QGIS 3.16 use visibleButtons() instead
Member QgsRelationWidgetWrapper::showUnlinkButton () const: since QGIS 3.16 use visibleButtons() instead
Member QgsRelationWidgetWrapper::visibleButtons () const: since QGIS 3.18 use widgetConfig() instead
Class QgsRendererRangeLabelFormat: since QGIS 3.10, use QgsClassificationMethod instead
Member QgsRendererWidget::symbolLevelsChanged (): since QGIS 3.20 – no longer emitted.
Member QgsRuleBasedLabelSinkProvider::reinit (QgsVectorLayer *layer): since QGIS 3.12
Member QgsRuntimeProfiler::beginGroup (const QString &name): use start() instead
Member QgsRuntimeProfiler::endGroup (): use end() instead
Member QgsScaleBarRenderer::calculateBoxSize (const QgsScaleBarSettings &settings, const QgsScaleBarRenderer::ScaleBarContext &scaleContext) const: Use the version with a QgsRenderContext instead.
Member QgsScaleBarRenderer::firstLabelXOffset (const QgsScaleBarSettings &settings) const: Use the version with QgsRenderContext instead.
Member QgsScaleBarRenderer::name () const: use id() instead
Member QgsScaleBarRenderer::segmentPositions (const QgsScaleBarRenderer::ScaleBarContext &scaleContext, const QgsScaleBarSettings &settings) const: use the version with a QgsRenderContext instead
Member QgsScaleBarSettings::brush () const: use fillSymbol() instead
Member QgsScaleBarSettings::brush2 () const: use alternateFillSymbol() instead
Member QgsScaleBarSettings::fillColor () const: use fillSymbol() instead.
Member QgsScaleBarSettings::fillColor2 () const: use alternateFillSymbol() instead
Member QgsScaleBarSettings::font () const: use textFormat() instead
Member QgsScaleBarSettings::fontColor () const: use textFormat() instead
Member QgsScaleBarSettings::lineCapStyle () const: use lineSymbol() instead
Member QgsScaleBarSettings::lineColor () const: use lineSymbol() instead.
Member QgsScaleBarSettings::lineJoinStyle () const: use lineSymbol() instead
Member QgsScaleBarSettings::lineWidth () const: use lineSymbol() instead.
Member QgsScaleBarSettings::pen () const: use lineSymbol() instead.
Member QgsScaleBarSettings::setBrush (const QBrush &brush): use setFillSymbol() instead
Member QgsScaleBarSettings::setBrush2 (const QBrush &brush): use setAlternateFillSymbol() instead
Member QgsScaleBarSettings::setFillColor (const QColor &color): use setFillSymbol() instead.
Member QgsScaleBarSettings::setFillColor2 (const QColor &color): use setAlternateFillSymbol() instead.
Member QgsScaleBarSettings::setFont (const QFont &font): use setTextFormat() instead
Member QgsScaleBarSettings::setFontColor (const QColor &color): use textFormat() instead
Member QgsScaleBarSettings::setLineCapStyle (Qt::PenCapStyle style): use setLineSymbol() instead
Member QgsScaleBarSettings::setLineColor (const QColor &color): use setLineSymbol() instead.
Member QgsScaleBarSettings::setLineJoinStyle (Qt::PenJoinStyle style): use setLineSymbol() instead
Member QgsScaleBarSettings::setLineWidth (double width): use setLineSymbol() instead.
Member QgsScaleBarSettings::setPen (const QPen &pen): use setLineSymbol() instead.
Class QgsSearchQueryBuilder: Will be removed in QGIS 4
Member QgsSnappingConfig::IndividualLayerSettings::IndividualLayerSettings (bool enabled, SnappingType type, double tolerance, QgsTolerance::UnitType units): since QGIS 3.12 use the method with SnappingTypeFlag instead.
Member QgsSnappingConfig::IndividualLayerSettings::setType (QgsSnappingConfig::SnappingType type): since QGIS 3.12 use setTypeFlag instead.
Member QgsSnappingConfig::IndividualLayerSettings::type () const: since QGIS 3.12 use typeFlag instead.
Member QgsSnappingConfig::setType (QgsSnappingConfig::SnappingType type): since QGIS 3.12 use setTypeFlag instead.
Member QgsSnappingConfig::SnappingType: since QGIS 3.12 use SnappingTypeFlag instead.
Member QgsSnappingConfig::type () const: since QGIS 3.12 use typeFlag instead.
Member QgsSpatialIndex::insertFeature (QgsFeatureId id, const QgsRectangle &bounds): Use addFeature() instead
Member QgsSpatialIndex::insertFeature (const QgsFeature &feature): Use addFeature() instead
Member QgsStyleManagerDialog::itemChanged (QStandardItem *item) SIP_DEPRECATED: since QGIS 3.6 - has no effect and will be removed in QGIS 4.0
Member QgsStyleManagerDialog::populateColorRamps (const QStringList &colorRamps, bool checkable=false) SIP_DEPRECATED: No longer required in QGIS 3.6, as the model is updated live. Has no effect and will be removed in QGIS 4.0
Member QgsStyleManagerDialog::populateSymbols (const QStringList &symbolNames, bool checkable=false) SIP_DEPRECATED: No longer required in QGIS 3.6, as the model is updated live. Has no effect and will be removed in QGIS 4.0
Member QgsStyleManagerDialog::populateTypes () SIP_DEPRECATED: since QGIS 3.6 - has no effect and will be removed in QGIS 4.0
Member QgsStyleManagerDialog::regrouped (QStandardItem *) SIP_DEPRECATED: since QGIS 3.6 - has no effect and will be removed in QGIS 4.0
Member QgsStyleManagerDialog::removeColorRamp () SIP_DEPRECATED: since QGIS 3.6 - has no effect and will be removed in QGIS 4.0
Member QgsStyleManagerDialog::removeSymbol () SIP_DEPRECATED: since QGIS 3.6 - has no effect and will be removed in QGIS 4.0
Member QgsStyleManagerDialog::setSymbolsChecked (const QStringList &) SIP_DEPRECATED: since QGIS 3.6 - has no effect and will be removed in QGIS 4.0
Class QgsSublayersDialog: Will be removed in QGIS 4.0
Member QgsSublayersDialog::PromptMode: Use Qgis::SublayerPromptMode instead
Member QgsSublayersDialog::QgsSublayersDialog (ProviderType providerType, const QString &name, QWidget *parent=nullptr, Qt::WindowFlags fl=Qt::WindowFlags(), const QString &dataSourceUri=QString()): Will be removed in QGIS 4.0
Member QgsSvgCache::statusChanged (const QString &statusQString): Deprecated since QGIS 3.6 – no longer emitted.
Member QgsSvgMarkerSymbolLayerWidget::populateList (): since QGIS 3.16
Member QgsSymbol::bigSymbolPreviewImage (QgsExpressionContext *expressionContext=nullptr, int flags=static_cast< int >(Qgis::SymbolPreviewFlag::FlagIncludeCrosshairsForMarkerSymbols)): use bigSymbolPreviewImageV2 instead.
Member QgsSymbol::layer () const: Will be removed in QGIS 4.0
Member QgsSymbol::setLayer (const QgsVectorLayer *layer): Will be removed in QGIS 4.0
Member QgsSymbolLevelsWidget::apply (): since QGIS 3.20. Use symbolLevels() and manually apply the changes to the renderer as appropriate.
Member QgsSymbolRenderContext::mapUnitScale () const: Will be removed in QGIS 4.0
Member QgsSymbolRenderContext::outputLineWidth (double width) const: Use the size conversion methods in QgsRenderContext instead.
Member QgsSymbolRenderContext::outputPixelSize (double size) const: Use the size conversion methods in QgsRenderContext instead.
Member QgsSymbolRenderContext::outputUnit () const: No longer used and will be removed in QGIS 4.0
Member QgsSymbolRenderContext::setMapUnitScale (const QgsMapUnitScale &scale): Will be removed in QGIS 4.0
Member QgsSymbolRenderContext::setOutputUnit (QgsUnitTypes::RenderUnit u): No longer used and will be removed in QGIS 4.0
Member QgsTableEditorWidget::selectionForegroundColor (): use selectionTextFormat() instead.
Member QgsTableEditorWidget::setSelectionForegroundColor (const QColor &color): Use setSelectionTextFormat() instead.
Member QgsTextRenderer::drawPart (QPointF origin, double rotation, HAlignment alignment, const QStringList &textLines, QgsRenderContext &context, const QgsTextFormat &format, TextPart part, bool drawAsOutlines=true): Private API only, will be removed in 4.0
Member QgsTextRenderer::drawPart (const QRectF &rect, double rotation, HAlignment alignment, const QStringList &textLines, QgsRenderContext &context, const QgsTextFormat &format, TextPart part, bool drawAsOutlines=true): Private API only, will be removed in 4.0
Member QgsTriangularMesh::centroids () const: since QGIS 3.14 use faceCentroids() instead
Member QgsVectorDataProvider::forceReload (): QGIS 3.12 - will be removed in QGIS 4.0 - use reloadData instead
Member QgsVectorFileWriter::QgsVectorFileWriter (const QString &vectorFileName, const QString &fileEncoding, const QgsFields &fields, QgsWkbTypes::Type geometryType, const QgsCoordinateReferenceSystem &srs=QgsCoordinateReferenceSystem(), const QString &driverName="GPKG", const QStringList &datasourceOptions=QStringList(), const QStringList &layerOptions=QStringList(), QString *newFilename=nullptr, QgsVectorFileWriter::SymbologyExport symbologyExport=QgsVectorFileWriter::NoSymbology, QgsFeatureSink::SinkFlags sinkFlags=QgsFeatureSink::SinkFlags(), QString *newLayer=nullptr, const QgsCoordinateTransformContext &transformContext=QgsCoordinateTransformContext(), FieldNameSource fieldNameSource=Original): Use create() instead.
Member QgsVectorFileWriter::QgsVectorFileWriter (const QString &vectorFileName, const QString &fileEncoding, const QgsFields &fields, QgsWkbTypes::Type geometryType, const QgsCoordinateReferenceSystem &srs, const QString &driverName, const QStringList &datasourceOptions, const QStringList &layerOptions, QString *newFilename, QgsVectorFileWriter::SymbologyExport symbologyExport, QgsVectorFileWriter::FieldValueConverter *fieldValueConverter, const QString &layerName, QgsVectorFileWriter::ActionOnExistingFile action, QString *newLayer=nullptr, const QgsCoordinateTransformContext &transformContext=QgsCoordinateTransformContext(), QgsFeatureSink::SinkFlags sinkFlags=QgsFeatureSink::SinkFlags(), FieldNameSource fieldNameSource=Original): Use create() instead.
Member QgsVectorFileWriter::writeAsVectorFormat (QgsVectorLayer *layer, const QString &fileName, const QString &fileEncoding, const QgsCoordinateTransform &ct, const QString &driverName="GPKG", bool onlySelected=false, QString *errorMessage=nullptr, const QStringList &datasourceOptions=QStringList(), const QStringList &layerOptions=QStringList(), bool skipAttributeCreation=false, QString *newFilename=nullptr, QgsVectorFileWriter::SymbologyExport symbologyExport=QgsVectorFileWriter::NoSymbology, double symbologyScale=1.0, const QgsRectangle *filterExtent=nullptr, QgsWkbTypes::Type overrideGeometryType=QgsWkbTypes::Unknown, bool forceMulti=false, bool includeZ=false, const QgsAttributeList &attributes=QgsAttributeList(), QgsVectorFileWriter::FieldValueConverter *fieldValueConverter=nullptr, QString *newLayer=nullptr): Use writeAsVectorFormatV2() instead.
Member QgsVectorFileWriter::writeAsVectorFormat (QgsVectorLayer *layer, const QString &fileName, const QgsVectorFileWriter::SaveVectorOptions &options, QString *newFilename=nullptr, QString *errorMessage=nullptr, QString *newLayer=nullptr): Use writeAsVectorFormatV2() instead.
Member QgsVectorFileWriter::writeAsVectorFormat (QgsVectorLayer *layer, const QString &fileName, const QString &fileEncoding, const QgsCoordinateReferenceSystem &destCRS=QgsCoordinateReferenceSystem(), const QString &driverName="GPKG", bool onlySelected=false, QString *errorMessage=nullptr, const QStringList &datasourceOptions=QStringList(), const QStringList &layerOptions=QStringList(), bool skipAttributeCreation=false, QString *newFilename=nullptr, QgsVectorFileWriter::SymbologyExport symbologyExport=QgsVectorFileWriter::NoSymbology, double symbologyScale=1.0, const QgsRectangle *filterExtent=nullptr, QgsWkbTypes::Type overrideGeometryType=QgsWkbTypes::Unknown, bool forceMulti=false, bool includeZ=false, const QgsAttributeList &attributes=QgsAttributeList(), QgsVectorFileWriter::FieldValueConverter *fieldValueConverter=nullptr, QString *newLayer=nullptr): Use writeAsVectorFormatV2() instead.
Member QgsVectorFileWriter::writeAsVectorFormatV2 (QgsVectorLayer *layer, const QString &fileName, const QgsCoordinateTransformContext &transformContext, const QgsVectorFileWriter::SaveVectorOptions &options, QString *newFilename=nullptr, QString *newLayer=nullptr, QString *errorMessage=nullptr): since QGIS 3.20, use writeAsVectorFormatV3 instead
Member QgsVectorLayer::addPart (const QList< QgsPointXY > &ring): since QGIS 3.12 - will be removed in QGIS 4.0. Use the variant which accepts QgsPoint objects instead of QgsPointXY.
Member QgsVectorLayer::addRing (const QVector< QgsPointXY > &ring, QgsFeatureId *featureId=nullptr): since QGIS 3.12 - will be removed in QGIS 4.0. Use the variant which accepts QgsPoint objects instead of QgsPointXY.
Member QgsVectorLayer::addTopologicalPoints (const QgsPointXY &p): since QGIS 3.12 - will be removed in QGIS 4.0. Use the variant which accepts QgsPoint objects instead of QgsPointXY.
Member QgsVectorLayer::drawVertexMarker (double x, double y, QPainter &p, Qgis::VertexMarkerType type, int vertexSize): Use the equivalent QgsSymbolLayerUtils::drawVertexMarker function instead
Member QgsVectorLayer::excludeAttributesWfs () const: since QGIS 3.16, use fields().configurationFlags() instead
Member QgsVectorLayer::excludeAttributesWms () const: since QGIS 3.16, use fields().configurationFlags() instead
Member QgsVectorLayer::setExcludeAttributesWfs (const QSet< QString > &att): since QGIS 3.16, use setFieldConfigurationFlag instead
Member QgsVectorLayer::setExcludeAttributesWms (const QSet< QString > &att): since QGIS 3.16, use setFieldConfigurationFlag instead
Member QgsVectorLayer::splitFeatures (const QVector< QgsPointXY > &splitLine, bool topologicalEditing=false): since QGIS 3.12 - will be removed in QGIS 4.0. Use the variant which accepts QgsPoint objects instead of QgsPointXY.
Member QgsVectorLayer::splitParts (const QVector< QgsPointXY > &splitLine, bool topologicalEditing=false): since QGIS 3.12 - will be removed in QGIS 4.0. Use the variant which accepts QgsPoint objects instead of QgsPointXY.
Member QgsVectorLayerEditUtils::addPart (const QVector< QgsPointXY > &ring, QgsFeatureId featureId): since QGIS 3.12 - will be removed in QGIS 4.0. Use the variant which accepts QgsPoint objects instead of QgsPointXY.
Member QgsVectorLayerEditUtils::addRing (const QVector< QgsPointXY > &ring, const QgsFeatureIds &targetFeatureIds=QgsFeatureIds(), QgsFeatureId *modifiedFeatureId=nullptr): since QGIS 3.12 - will be removed in QGIS 4.0. Use the variant which accepts QgsPoint objects instead of QgsPointXY.
Member QgsVectorLayerEditUtils::splitFeatures (const QVector< QgsPointXY > &splitLine, bool topologicalEditing=false): since QGIS 3.12 - will be removed in QGIS 4.0. Use the variant which accepts QgsPoint objects instead of QgsPointXY.
Member QgsVectorLayerEditUtils::splitParts (const QVector< QgsPointXY > &splitLine, bool topologicalEditing=false): since QGIS 3.12 - will be removed in QGIS 4.0. Use the variant which accepts QgsPoint objects instead of QgsPointXY.
Member QgsVectorLayerJoinInfo::joinFieldNamesBlackList () const: use joinFieldNamesBlockList() instead
Member QgsVectorLayerJoinInfo::setJoinFieldNamesBlackList (const QStringList &blackList): use setJoinFieldNamesBlockList() instead
Member QgsVectorLayerSaveAsDialog::crs () const: since QGIS 3.14 - will be removed in QGIS 4.0. Use crsObject() instead.
Member QgsVectorLayerSaveAsDialog::QgsVectorLayerSaveAsDialog (long srsid, QWidget *parent=nullptr, Qt::WindowFlags fl=Qt::WindowFlags()): since QGIS 3.14 - will be removed in QGIS 4.0
Class QgsVectorLayerServerProperties: since QGIS 3.22